This is a JP Fluid Control direct operating 2 way solenoid valve with G 1/4 inch threads and a 24 V AC coil. The valve has a stainless steel housing with teflon (PTFE) sealing and an orifice size of 1 mm (approximately 3/64 inch). The circuit function of the solenoid valve is normally closed, which means the valve opens when voltage is applied.The valve is suitable for pressures of 0 - 100 bar (0 - 1450 psi) and a maximum temperature of 130° C (266° F). The valve has a Kv-value of 0.03 m3/h, which translates to a flow rate of 0.5 l/min at a differential pressure of 1 bar (for water). In imperial units: Cv = 0.03, which means 0.03 GPM @ 1 psi pressure drop. For simple applications it is often enough to select a valve based on the thread size and orifice diameter. For more accurate sizing, use the Kv-value with our easy to use valve sizing calculator (). The stainless steel housing is very durable, strong and resistant to a wide range of chemicals with the exception of chloride solutions. Consult our chemical resistance chart to verify compatibility of housing and seals with the medium. The valve has an IP65 rating if properly connected. Pros:- Suitable for high pressures up to 100 bar- Solenoid valves open and close very fast compared to many other valve types- Delivered including coil and connector- Good protection against the environment thanks to the IP65 ratingCons:- Solenoid valves are very sensitive to dirt and can only be used with clean liquids and gases- Solenoid valves use energy while activated and the coil may get hot. A well ventilated installation environment is recommended to dissipate the heatHP-DA seriesThe HP-DA is a directly operated, normally closed 2/2-way solenoid valve, specially designed for high pressure applications. The solenoid valves have an orifice of 3 mm,
Trustpilot
1 month ago
3 weeks ago
