Warmoon LED Motion Sensor Flood Light 30W Outdoor IP65 Waterproof 3200K Warm White Security Wall lighting With Sensitive Detector

So far a decent light, YES! It is very bright! Here are a few tips that may make installation easier and last much longer!My first problem was a round mounting box used for the old security light. The Warmoon LED uses the typical LED U frame mounting bracket. So how do you mount the light without losing some semblance of directional adjustably to an existing box? A quick trip the the hardware store solved the problem.Shopping list1; 1/2inch to 1/4 inch reducing busing,1; 1/4 inch by 2 inch piece of threaded pipe,1; 1/4 quarter inch 90 degree elbow1; 5/8 by 1 inch bolt1; 5/8 nut (Jam nut)1; small tube of silicon clear1; 1/2 rubber compression busing (for hard wire inside the round box)NOTE: Take your bracket to the hardware store with you. TEST FIT the BOLT and NUT arrangement (see photo)! The mounting bracket can very a little so you want to test the center hole size.NOTE: External mounting boxes (Square or round) 95% of the time will have 1/2inch holes. Verify what hole size your box has by taking a hole plug (round plug with grove in it) with you. If your box has a different size hole stacking reducing busings should be able to get you to down to the 1/4 inch size without adding bulk or ugliness.Direction adjustment: The nut is used as a jam nut to pinch the metal frame against the 90 degree elbow. Once you have decided on the light direction tighten the nut.About the death of the motion sensor. First it is rather cheap but ALL sensors are! I've had sensors go out on $140 lights. Second for some odd reason the manufacture mounts the motion sensor UPSIDE DOWN! The sensor adjustment dials need to be pointing toward the ground (out of direct weather). In this case the issue can be rectified by unscrewing and removing the thumb screw at the sensors elbow. Once unscrewed flip the sensor over and replace the thumb screw. You may, while the sensor is disassembled fill the cavity where the wires enter the sensor head with silicon. This will block water from entering into the head from this point and rapidly killing the sensor. Replace the thumb screw and check that the sensor dials are now pointed toward the ground. Irregardless of where you mount the sensor head (on top or bottom of light) of your light the adjustment dials need to be pointing DOWN!.[...]Hope this helps!

I actually ordered this purely by accident. When it came we decided to give it a try rather than send it back. We cut off the plug so we could wire it in above the back porch, and it works great. Believe it or not it actually looks great as well. Smaller than I expected, but it lights up the back walkway perfectly. I would buy it again.

I was very surprised how bright and how much area it covers. The motion part works great, I just followed the instructions for setup. After a few good rains and they still work fine. This light is well made, durable metal construction. Check the sizes of that big flood light and protect your eyes when install them because they magnificent bright!

Very bright motion sensor lights! I first ordered 2 to try out mounted in my back & side yard, we like how bright they are and end up buying 3 more to mount at our business location, the motion sensor works very well and can activate the light at a good 25 feet away all around approx. 180 degee, so far all 5 work nicely, I bought them all in bright white color, 4 30watts and 1 20watts to mount above my driveway and it does shine up the neighbor's garage door across the street, I don't suggest a 30watt in front driveway as it is too bright, so far I'm happy with all 5 thank you! :))

Nice little light! I was dubious at first because it's quite small, but WOW does it work. Check out my pics. Easily adjustable, too.

Great product, well made, and sufficiently lights the walk ways where needed. Easy to install. Cons: Installation instructions are poor, comes with hanging bracket but no hardward, and plug in cord is about a foot shorter than normal.

The light is amazingly bright. The fact that it is LED, worried me at first. The light is white, and is very clear. The marksmanship is air/water tight, very light weight.I am very pleased with my new Warmoon purchase. For the price, you get alot of bang. Installs easily. Be aware, there is no wiring, as it plugs in a three prong electric outlet.

I had so many places I wanted to use it, but my son beat me to it and put it to light up garage when door motion detected. 10 W is about all that is needed to light up half the garage. Bought for about $16, great price.

The one I received had a regular 3-prong outlet - I saw some images with... some withoutWhat's almost surprising, is that motion sensor is almost as big as the light -...

Worked perfectly till Amazon's return period ended, just over 30 days. Now won't turn on at all. Don't buy, piece of junk.

Light is not as bright as I thought but works for its purpose

I have purchased 5 of these lights for security purposes around our home. They work very well for about 12-14 months then quit working.

As title says it quit working, now it goes off randomly with no motion. Defeats the entire purpose, I wouldnt recommend.

This is a great light and sensor. Everything works the way it should. The reason I gave them 2 stars is because they only lasted a 20months.

Light is very bright and worked well for 2yrs in night mode. Just failed so I will be looking for a different replacement.

Works as expected

I can't give this less stars. The unit failed quickly. Liked the unit when it worked, was easy to set-up, but like other reviewers, the unit does not work for long.

Best bang for the buck! Super bright