iOptron SkyGuider Pro Camera Mount Full Package

La durata della batteria interna è eccezionale. Per il resto è robusto e funziona bene. Buoni gli accessori. Non sono compresi il treppiede e la testa equatoriale. Unisco le foto del manuale in italiano e quello a corredo in inglese.

bei mir in der astrophotografie immer wieder gerne benutzt,klass gerät

Normally I do my imaging with a very elaborate, expensive, heavy, and bulky setup. I wanted an ultra small/light setup for travel and fast setup. I have another Ioptron mount and it works great so thought this would be a good choice. I have used it with my Nikon D800 DSLR and lens ranging from 20mm to 300mm. Even with the 300 the sharps remain dots with exposures up to 3 minutes or more. The attached wide field shot of the Milky Way was shot with a 20mm lens and 6 minute exposure on the DSLR. My normal setup is a ATIK 940 EX cooled astro camera with the same Nikon lens. on the SkyGuider. I use a Bogen crutch leg tripod or a surveyors tripods. A heavy sturdy tripod is mandatory! The mount can take up to 11# of camera and lens via a setup that uses a counterweight. There is a version with just the mount and another one with the equatorial mount bracket, counter weight shaft and counter weight, and a attachment that lets you set it up in several configurations.That is the setup I have. I went with the photo kit which only adds a few bucks to the cost. The included polar alignment scope is very accurate and fast to setup. It takes just a couple of minutes to polar align.it very accurately using a free app for Android or Iphones that matches the observing location, time and date to where Polaris is in relation to the true North Celestial Pole. That information is used to locate Polaris on the circum polar circle in the finder scope. The guider itself hasa good sized gear with a brass worm drive. The transission from the motor is via a toothed rubber drive belt which will eliminate jitter. In short the drive is very smooth and accurate. The mount has siderial, lunar, and solar tracking rates as well as 1/2 siderial which is used when imaging the sky with landscape in the forground. The mount is unique in that it includes a autoguide port. I haven't used that yet although I do have a small autogfuider setup that would work with it. However, the mount is so good you may not need it.....I am trying to keep from adding a bunch of additional gear...so may never use that guider port. Note thouigh that since the mount tracks only is RA....the guider would only move in RA also. Since DEC shouldn 't be an issue with a good polar alignment you really won't need DEC guiding. I included a photo of the setup I use with the ATIK camera. Note that while this is a tracking mount there is no provision for GOTO or finding stars. You will have to find them yourself but if you know enough about astronomy that won't be a problem. The software I have allows me to focus and continually see where my ATIK camera is aimed. My Nidon was a little bit more difficult but I found a device that plugs into the camera hot shoe what can hold either a red dot finder or a green laser pointer to help you aim it. The only issue I had was the first one arrived with a bad battery that would not take or hold a charge. Adorama promtoply issued a RA and sent another one which has worked flawlessly. I have bought a lot of gear over the years from Adorama so can vouch for their company and service. By the way the internal battery is rechageable and lasts for up to 20 hours but you can also plug an external power supply to run the mount as well as recharge the battery. That connection also let you upload firmware updates when they come out. THere is a port to have a camera cable release on some cameras, but in my case it was redundant for what I alread have. In short this is an amazing device for astrophotography. It is easy to use, a qality product and well engineered. I will not give uip my more elaborate setup but this makes it easy to take great astrophotos......but it helps to have dark skies of course!

A great starguider for starting out. Been using this for a few months and have been quite happy with it. Using their tripod and my mirrorless camera, I've been able capture some great deep space objects. Polar alignment is always a meticulous task with the viewfinder but not too difficult and I'm able to get 2 minute exposures with a 500mm lens and still get sharp images. That's more than I ever expected. And the battery will always last me several days (15ish hours of runtime) before I have to think about charging it. This is not the bottleneck in my current astrophotography rig and won't be for a long time. I do always have to double-check the press/hold controls but besides that it's a pretty good package

Hochwertiges Gerät und super schnelle Lieferung! Dank an Teleskop-Service!!! Meine Fragen wurden von Teleskop-Service schnell und gut beantwortet. Immer wieder gerne!