Fanttik E2 Ultra Electric Screwdriver, Screwdriver for Electronics (Grey)

Great little set. Screwdriver has multiple torque settings, and the bit selection is terrific. The bits are on the smaller size and great for finer work on small electronics. I use mine for PC builds. Magnetic bits make working with small screws easy. The storage case and rotating bit system is terrific. Lasts a long time on a single charge.

This is solid. The pack has all the attachments I need and is easy to use. It is lightweight and very portable. The whole case is good sized and overall thats a very worth set if you are into fixing electronics at home.

For the actual tool functionality portion of this kit, I give it 5 stars and for most people that's all that will matter. The bits fit into appropriate fasteners well and do not strip screws. It has adequate torque to handle anything I've thrown at it, assuming you're not trying to build furniture. This is an electronics set for for that I use it. It is very easy and the battery life is great for anything I've built. It seems durable and none of my bits have been chewed up or eroded. The primary compaint with this set is the storage system. It is very good, as long as it is never jostled, dropped, or knocked over. And unless you're extremely orderly with your kit and never transport it, you will eventually jostle, drop or knock it over. Every bit is affixed inside by a rotating, magnetized spindle. Any jarring of the device/container (such as transporting it in a tech backpack and dropping your pack on a desk) will knock the bits loose and leave them in a pile. Best case scenario is that you have to put all of your bits back into their proper spots which is tedious. Worst case scenario is that the bits get wedged into crevices and prevent you from turning the spindle or easily retrieving the bits that cause the jam. This is extremely irritating and a major design flaw in my opinion. Ultimately, I'm not going to deduct a star for that because in the long run it is a tool and I believe I should be reviewing how the tool functions, not how it looks or is stored. If what I wrote about the storage system would apply to your concerns, knock off a couple stars because it is that bad.

This thing is incredibly torquey! Totally worth the price of admission if you take apart and put together devices with tens of little screws on any regular basis, saves so much time and doesn't gas out... it can actually be difficult to keep hold of it at higher settings. Down sides, the pop-up mechanism, while cool, only pops it up about a centimeter, which isn't enough to get a grip on it. So I end up turning it on its side, which is less cool. It's completely round which means it will twist VERY easily in the hand, to the point it's difficult to index or maintain your grip on it without having it spin between your fingers; a more oval shape actually would be an advantage, or at least some knurling. The stowage design doesn't allow you to leave a most-used bit inserted, you have to take out the bit every time you put it away. The stowage system also is very tight tolerances, meaning no adding friction tape without making the case useless. All of these are relatively minor gripes though; overall it's already a major asset to my workbench, and saves me minutes on each repair.

Works excellent! Not only is the driver faster than most of the cheap ones out there, the bits are of high quality, which means they're sized properly and durable. I'm using this for repairing laptops and having quality bits is almost as important as having a high quality driver. This kit gets me both. The battery seems to last pretty long and the driver and bits all fit neatly back into the convenient cylinder. And you can charge it while its being stored, as the USB-C port is accessible. If I could change one thing about it, it would be that it comes with both a standard length and extended PH1 & PH2 bit.

I've accumulated quite a collection of precision screwdrivers over the years, both manual and electric, and this has quickly become one of the ones I reach for most often. I primarily use it for working on 3D printers, desktop computers, robotics projects, electronics, and other precision assemblies. The torque is well suited for M2-M4 fasteners commonly found in printers and PC hardware. It's powerful enough to speed up repetitive work but not so aggressive that you're constantly worried about stripping threads in plastic or aluminum. The bit selection covers nearly everything I encounter during printer maintenance and upgrades, from hotends and extruders to AMS units, motherboards, fans, and sensors. The magnetic bit retention is solid, and the bits themselves seem well machined with a precise fit that minimizes cam-out. The screwdriver is lightweight, comfortable to hold, and has good balance, making it easy to use for extended repair sessions. Battery life has been excellent, and USB-C charging is a welcome convenience. The case is compact, organized, and easy to toss into a toolbox or printer maintenance kit. One thing worth understanding is that this is a precision screwdriver, not an impact driver or high-torque electric screwdriver. If a fastener is seized or was installed very tightly, I always break it loose manually first, then let the Fanttik handle removal and reinstallation. Used this way, it excels. For anyone who regularly builds or maintains 3D printers, PCs, drones, RC equipment, robotics, or consumer electronics, this is an excellent addition to the toolbox. It has saved me a lot of time on repetitive disassembly while still providing the control needed around delicate components. Highly recommended.

Honestly thought this was a little overpriced, but I liked the idea of it, and I trust this brand, as I have one of their tire air inflators already. Dude this thing is so sick!! Glad I decided to spend the money. The tool itself feels solid, and the torque selector feature is nice (speed does not change, which took me a sec to understand). Also, you don’t have to use the electric mode, it locks out when you spin it manually (I was concerned from my electric ratchet experience that I may damage some super small/fragile screws/threads). Nice to know I can still spin this manually if I want. The bit holder is a bit plasticky, but makes sense for weight and cost. Plus the ability to spin it and find your bits is very slick. Almost like a corner cubbard in your kitchen that has a spinning shelf built in. The tool and case are both metal. Even just popping the tool and bit holder out of its case feels slick. I’ve barely used this thing, so longevity has yet to be seen, but man it feels so nice, I’m already glad I dumped the $60 on it!!

I picked up the Fanttik E2 Ultra mainly for my DIY electronics stuff—assembling 3D printed projects, swapping parts on my keyboard, and messing around with small circuit boards—and it’s honestly become one of my favorite little tools on the bench. The torque is just right for electronics work. It’s strong enough to drive tiny screws into plastic and metal without stripping them, but not so strong that I’m paranoid about destroying threads on a PCB. The adjustable torque settings actually matter here, I switch between them depending on if I’m working on a keyboard plate, case screws, or more delicate internals. The bit selection is awesome for this kind of work. There’s pretty much every tiny bit I’ve needed so far: Phillips, flat, Torx, tri-wing, and some more “weird” ones that came in handy on random gadgets I didn’t even plan on opening. The magnetic bit holder and magnetic storage are super convenient too, stuff doesn’t roll away all over my desk which is a minor miracle. Few small downsides though: • It’s definitely not meant for anything beyond light duty. If you’re thinking of using this on furniture or anything with real resistance, it’s going to tap out fast. • The handle is smooth and a little small, so after a while my hand gets a bit cramped compared to a chunky manual driver. • The bits are great quality for the price, but a couple of the super tiny ones feel like they could round off if you’re careless or push too hard. Battery life has been solid for me—I can get through multiple keyboard builds and random fixes on a single charge—but I do wish there was a clearer battery level indicator instead of just guessing when it’s going to die, that part is kinda annoying. Overall, for electronics, 3D printed assembly, and keyboard work, this thing is a no-brainer. It’s not a do-everything screwdriver, but for small precision stuff it’s honestly kind of perfect and I definately reach for it first now.

very good

كولتي عالي ومنتج جميل

⭐⭐⭐⭐⭐ Klare Kaufempfehlung! Der Fanttik E2 Ultra ist ein absolut praktisches Tool für alle, die regelmäßig kleine Reparaturen durchführen. Ob Smartphone, Laptop oder Brille – dank der vielen Bits ist man für fast alles bestens ausgestattet. Besonders überzeugt haben mich die hochwertige Verarbeitung, das schlanke Design und die einfache Bedienung. Die einstellbaren Drehmomentstufen ermöglichen präzises Arbeiten, ohne empfindliche Schrauben zu beschädigen. Der Akku hält lange durch und lässt sich bequem per USB-C laden. Für filigrane Arbeiten perfekt geeignet – kraftvoll genug für kleine Aufgaben, aber nicht überdimensioniert. Tolles Preis-Leistungs-Verhältnis und klare 5 Sterne! 🌟

The screwdriver set is designed to be for electronics and claims to be a torque screwdriver, but when I got it, it would strip screw heads on the lowest torque value of 0.05NM which does not match how a torque screwdriver is meant to operate, for instance my other Fanttik S2Pro set on those same screws with 0.5NM would make an ugga dugga sound when torque value was reached like you hear from torque guns for mechanics, with this in mind I felt the need to return the driver because it was less suitable than a screwdriver 20x more powerful than this screwdriver, simply because The E2 does not stop turning bits when it reaches the set torque value. Other than this it is exceptionally powerful for its size, easy to use, has great battery life and a very creative rotary door style storage mechanism, very durable case but I have noticed that dues to the cases design, you pop it open with a press to the top, which I realised if you turn it upside down and give it just one small shake up and down, the whole storage mechanism including the driver comes falling out! This is not ideal at all and should have a way to lock the internal into the case, to stop this happening naturally as you carry it!

まず第一に驚かされたのは、その洗練されたデザインと高い機能性です。従来の電動ドライバーのイメージを覆すような、美しくミニマルな外観は、使っているだけで気分が上がります。 特に感動したのは、その収納ケースです。マグネット式でしっかりとビットが固定され、開閉もスムーズ。充電機能も内蔵されているため、ケースにしまうだけで常に充電が完了している状態を保てます。これにより、「使おうと思ったら充電が切れていた」というトラブルから解放されました。また、豊富なビットの種類が付属しており、これ一つあればほぼ全ての精密作業に対応できる安心感があります。トルク調整も可能で、繊細な作業からしっかりと締めたい作業まで、幅広く対応できる点も高く評価できます。 改善点としては、もう少し本体が短いと、さらに取り回しやすくなるかなと感じました。特に狭い場所での作業では、もう少しコンパクトだと完璧です。しかし、この点を差し引いても、全体としての完成度は非常に高く、精密機器を扱う上でこれほど頼りになるツールは他にないと感じています。 良い点 洗練されたデザインと高品質な質感: アルミボディは高級感があり、所有する喜びを感じさせます。 革新的な収納ケース: マグネットによるビット固定と、ケースに収納するだけで充電が始まる機能は非常に便利です。 豊富なビットの種類: 多数のビットが付属しており、あらゆる精密作業に対応できます。 優れた操作性: 非常に静かでスムーズな回転、トルク調整機能により、作業が快適に行えます。 悪い点 本体の長さ: 非常に狭い場所での作業では、もう少し短い方が扱いやすいかもしれません。 総合的に見て、Fanttik E2 Ultraはプロのクリエイターから趣味で精密作業を楽しむ方まで、すべての人に自信を持っておすすめできる製品です。