A1 Mini LED Light Strip 24V 190mm High Brightness Light Bar

The built in light on the A1 Mini is terrible making it impossible to see detail on an in progress print. This light is if fantastic and so simple to fit. It is self adhesive and sticks to the underside of the print arm (x axis) so maybe give this a wipe with alcohol before you stick it. The light plugs in to the accessory port on the side of the printer and cable ties are supplied to attach it to the main cable running to the printer. This makes it nice and tidy. A simple on off switch allows easy control. The light is powerful enough to show all the detail of the print so you can easily sort sky problems. Definitely recommend this light and you will have it up and running in under 5 minutes.

The Good Let’s be real: the stock "light" on the A1 Mini is basically a sad glow-worm trying its best. If you actually want to see if your 3D print is turning into a spaghetti monster at 2 AM, you need this. It’s stupidly easy to install—it’s got the 4-pin plug that actually fits the machine’s dedicated port, so no sketchy soldering or "voodoo electronics" required. It’s bright enough that I can finally stop squinting at the build plate like I’m looking for a lost contact lens. The Bad The packaging was... minimalist. As in, it arrived in a baggie with zero fanfare. If you’re the type of person who needs a fancy unboxing experience with silk ribbons and a manual written in ten languages, you’ll be disappointed. But honestly, it’s a light strip. If you can’t figure out "plug A goes into slot B," maybe 3D printing isn't the hobby for you. The Verdict I’ve had this thing running for six weeks now and it hasn't flickered once. It's significantly cheaper than the "official" options and does the exact same thing without the brand-name tax. It makes the printer look like a high-end piece of tech instead of a DIY project in a dark basement. Total no-brainer for the price.

Really good lighting i bought this thinking it was for the A1 not the mini but it does fit and works great, made a massive difference

Leds are very bright & light up the work area very well. Unfortunately when I removed the protective tape to mount the lights on the A1mini the adhesive was poor & would not sick properly, Even though I had cleaned the surface with a alcohol wipe. In the end I had to you some strong double sided tape to mount the light.. That's why I have given it a 4 star rating...

Lovely bright lights . Easy to stick on and saving a fortune on leaving the light on in the room to check on print camera

This light has been a fantastic addition to my A1 mini. Naturally the first thing I did was look for alternate mounting options which I could print using the A1 mini itself, settling on one which clips on in rather than permanently affixing the lights to the rail with the included adhesive strip - this mounting position also allows for a better view of the actual print nozzle which is very helpful.

Very good idea much brighter LEDs not your cheap LED strip comes with extra sticky back in case you want it moving or lose its stickiness, very well thought out item and must have for anyone with a Bambu lab printer

Very bright and good addition to the printer. Since the stock light on the mini isnt...fantastic, this simple plug and play LED strip is a must have. Plug it inside the side of the printer and mount it. I printed off a LED strip holderto have it as its own independent unit. Functions as you would expect, but cannot comment on adhesion as I have it slotted into my printed holder.

明るくて良かったです。

I needed some additional lighting for my Bambu A1 printer and found the UniTak3D light. It’s a LED strip that can be taped to the frame of the printer. The light strip has a switch on the cable that plugs into one of the power ports on the back of the A1. The light is quite bright and has a color temp about 5000K. I printed an arm for the LED strip, but the adhesive didn’t stick well to the PLA arm, so I resorted to using one of the small tie straps to hold the end of the LED strip where it meets the cord. It works well to light up the print bed for viewing while printing, but I wish I could adjust the color temperature and brightness level.

The cold white LED strip I purchased for my Bambu Lab A1 has proven to be precisely what I needed to enhance my printing experience. Its lighting is exceptionally bright and clear, allowing me to easily observe every print's details. Installation is straightforward, as it conveniently plugs into the additional AMS slot on the printer's back. While it can be overly bright when located near the print bed, this small concern doesn't lessen my overall satisfaction with the product. The manual on/off switch is handy if you prefer to use the original light on the A1. I appreciate the sleek, modern aesthetic it adds to my setup, boosting its visual appeal. Given its quality and price, this LED strip is an impressive upgrade for any user. It stands shoulder-to-shoulder with other brands offering similar features.

Ottimo prodotto come da descrizione

Vale, por un lado me ha gustado porque está específicamente diseñada para esta impresora 3D, y el conector, la longitud del led, y la longitud del cable están diseñados específicamente para esto, y casan perfectamente. Por este lado, genial. El grosor de los LEDS es bastante importante, pero bueno, a nivel funcional no importa porque aunque pasen super justo por la zona del cabezal, pasan, así que también bien. El único problema que he tenido es que se me está despegando por la parte del cable, parece que el peso del cable y el interruptor es demasiado para la cinta de doble cara que lleva. Tendré que apañarlo de alguna manera, pero esto ya me impide darle las 5 estrellas.