Size:3/4 Inch Specifications: 1.Suitable Media:Air Water Oil . 2.Operation Mode:Normally Closed (Opens when powered) 3.Plunger Tip:NBR 4.Working Pressure:0-1.0Mpa 5.Fluid Temperature: -5-100 Degrees Celsius / 23F to 212F 6.Operating Viscosity: Under 20CST 7.Valve Type:Direct Acting, Wet Armature. Semi-Direct lift valve. Suitable for gravity feed. 8.Installation: Fluid direction should be as the arrow shows . 9.Versatile, small, responsive, light and durable. 10. One year warranty. Product Description: 1).3/4"ports, brass body, Viton seal, 110 volt AC, for air, water, or oil 2).normally closed (N/C) electric solenoid valve is constructed with a durable brass body, two-way inlet and outlet ports with 1/4 inch female threaded (NPT) connections, and heat and oil resistant Viton gasket. 3).The coil uses alternating current and energizes at 110 volts AC; voltage range + or - 10%. 18 Watt power rating. 4).Semi-direct lift valve operates from 0 PSI to a maximum pressure of 145 PSI (0 MPa to 1.0 MPa). Operational pressure range for water: 0 to 101 PSI; for oil: 0 to 72 PSI; for air or gases: 0 to 101 PSI. 5).Operational temperature range is 23 to 212 degrees Fahrenheit; -5 to +100 degrees Celsius. Suitable for outdoor use; not for use underwater. 6).Suitable for use with hot or cold water, gases, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, e.g., gasoline, kerosene, or diesel fuel. 7).Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems or to control flow of propane gas. This solenoid valve serves as an excellent propane regulator. 8).Package Includes: 1 x Electric Solenoid Valve 1 x User Manual
3**T
At 50 PSI water pressure had to disassemble and adjust spring twice
I ended up taking this apart and stretching the spring twice to get this to reliably shut off at 50 psi water pressure. This is not something really suggested anyone do or have to do. While it's all working just fine now the fact that it wouldn't shut off with 50 PSI kind of hints to some design issue.ohh and it says 100 volts which explains why it runs sooo hot at 120 volts. Clearly not for US market, Japan is the only country I know that uses 100 volts.
R**H
This item looks good and i am sure it will do the job
This item looks good and i am sure it will do the job, will upgrade my review when i put it to work.
C**Y
Works as described
Works well. Make sure to respect the flow direction arrow otherwise it won’t fully stop the flow
J**D
Three Stars
Works great but makes a loud humming noise
A**R
ok
ok
Trustpilot
1 week ago
5 days ago
