ArmorSuit 6 Pack for Garmin Forerunner 965 (47mm) Screen Protector MilitaryShield HD Clear TPU Film - Made in USA

I purchased this ArmorSuit 6-pack for my Garmin 265, and so far I’m genuinely impressed. The installation was quick and completely bubble-free, and the fit is absolutely perfect, almost like it came built into the watch from the factory. I’ve been using the first protector for about a week now, and it still looks flawless with no lifting or scratches. I also really appreciate that the pack includes six protectors, which adds a lot of value. It gives me peace of mind knowing I have several backups ready to go whenever the current one eventually wears out. I’m hoping this helps extend the life of my watch screen and keep it protected from everyday bumps, sweat, and workouts. I’ll make sure to come back in a few months to update how long this first protector lasted before needing a replacement. So far, though, this has been a great purchase and one I definitely recommend to other Garmin users looking for reliable screen protection.

This is the second time I bought this product. After I bought my Fitbit I was looking for something to protect my new watch. First I purchased A different brand. That product was horrible. It came with three protectors and I could not get any of them to work. I finally gave up trashed the whole idea and decided to look for another brand. When I saw Armor Suit Military Shield I thought I would give it a try. I have been so happy. I put a shield on my watch and it worked pretty well the first time I tried. The only problem was that I used too much moisture the first time. That one lasted two or three weeks. I am very hard on my watch and that is why I needed to protect it. I work hard at work and it takes a lot of beating. The second shield that I put on my watch lasted a very long time. I would say it lasted 4 to 5 months. I got paint transfer on it that I could not to get off. I work at an auto body shop and car paint It’s very difficult to get off of something once it is on it. I went to put a new shield on my watch and discovered that I could not remember where I put the box with the rest of the shields. So I ordered a new box of shields. This time when I put on the shield it went on very easy. A little practice made perfect. I am including a photo of my watch. This shield has been on a month and like I said my watch takes a beating and I get lots of paint transfer, dirt, grime and oil from work. I also sanitize everything so it has taken a lot of sanitizer which degrades about everything. As you can see after a month of abuse and sanitizer it still doesn’t look too terribly bad. I definitely recommend this product especially if you are very hard on your watch. The shield has taken all of the abuse and my watch face looks brand new.

This item was even better than the description! It was very easy to install on the device, the u-Tube video link they provided was useful, but the written instructions would have been sufficient without the video. Basically, if you keep your fingers moistened (and it only took no more than 2-minutes to install the screen protector) but if needed, you can reapply the spray solution to your fingers as needed, Since ArmorSuit stated their screen protector could be easily removed, I resisted the urge to power up the device (as I didn't wanted to make sure the screen was a clean as it could possibly be) before I installed the screen saver. After using the enclosed squeegee to remove the few air bubbles trapped under the screen, and carefully wiping the excess moisture from around the edges after the final squeegee, I placed the unit flat on a shelf in an area of the house that receives constant air circulation from the heating/cooling unit, and left it their for 24-hours (they say it can be handled after 8 hours or so, but I wanted to make sure it was securely attached. When it was time to begin using the unit, the screen saver looked like it was actually part of the device, it was crystal clear with no bubbles, yet the touch-screen device responded perfectly, so the screen protector didn't interfere at all with the sensitivity of the unit, needless to say, I was very pleased with the product. However, due to no fault of ArmorSuit, after trying to get the device to load mapping software, it was determined the device itself was defective so I was asked to return the unit. Even though ArmorSuit states the screen protector can be removed and repositioned as necessary, I was very nervous about peeling off their product. I was able to remove the product, but I was actually surprised at how well (i.e. firm) the protector was attached to the screen. I needed to use an appropriate amount of force to remove it, but it made me feel very confident about how well their protector had "bonded" to my device. My fears about it prematurely peeling away from the screen were eased. and I felt their product would provide the protection they advertised. My defective unit will be replaced with a different model, so I won't be able to reuse the first screen protector I purchased, but I will definitely purchase one for the new model devise when it arrives.

Picture is of the 2nd sticker I installed. As you can see, there are a few bubbles, but this is more to do with operator (me) error and impatience than the quality of the stickers. The 1st sticker was perfect, and lasted almost a year before I had to replace it because the edge came loose on one side. Very long lasting! through sweaty runs, rainy runs, cold days, hot days, snow, etc. Definitely worth the price to keep your high dollar tech free from damage.

This was one of the easiest screen protectors I’ve installed. Application is extremely simple. Went on quickly with no bubbles, and everything needed was included in the kit. Fits perfectly. Lines up well with the screen and doesn’t interfere with touch or visibility. Practically invisible. Once it’s on, you really can’t tell it’s there. No weird glare or noticeable edges.

Some of the negative reviews here are a bit confusing. I'm writing this one primarily to set a few records straight. First of all, these screen protectors are stickers. They're thin plastic. Their purpose is to add a layer of cheap material over your expensive glass screen in order to prevent scuffs, scratches, chips, etc. The reason you get six in the package is that these are not supposed to be durable! They're expendable and disposable. You use one until it wears out, then you use another. Second, installation is an absolute breeze. I've used lots of these sorts of products for my devices over the years and this one had one of the easiest installations I've ever done. Anyone who is complaining that it took them four tries or whatever, didn't bother actually watching the installation video. The protector also wraps around the curvature of the Versa 2 just fine. Again, you need to watch the video and do it at the right time. I recommend watching both the watch video and the "curved device" video as you'll get tips in each. Here's a quick run-down of how to properly install: - First of all, you need a dust-free area. A good tip for this is to use your bathroom, immediately after a shower. The water vapor will drag a lot of the dust out of the air. - Second, make sure your hands are clean and oil-free. See the shower tip. - Next, use scissors and cut out one protector -- you'll be spraying it with a bunch of liquid and there's no reason to get the adjacent ones wet. - Now spray the watch face with the included solution. One spray seems to be sufficient here. - Now spray the fingers on both of your hands. Don't worry, the solution doesn't smell especially bad. - Now spray the front of the protector. - Now use your wet fingers and peel up the protector and liberally spray the back. - Finally, put the protector in place on the watch. Slide it around a bit into position. Hold half of it in place with your thumb and squeegee the liquid out from the other half. The protector will shift a bit. Gently push it back into place. Then hold and squeegee again, in a different direction. (I alternate Up-Right-Down-Left when doing this so I get equal coverage.) - Keep repeating the above step until the protector starts to stick to the watch. Then give it a couple of final swipes with the squeegee. - The curved edges will not be in place at this point. That's okay! Put the watch down and walk away for 15 minutes. - Now come back and using the microfiber cloth gently polish/press the protector, from the middle outward, all the way into the curved edges. They'll stick. Push them evenly around the face of the watch and all will be great. - And finally, wait 8 hours. Come back and give the edges another little pass if you need to. I'm deducting one star primarily for that 8 hour wait. I've never had to do that before. The installation instructions mention a hair dryer for quicker drying but they also mention simply doing this right before bed, and that seems to be an easier and perhaps better option. Once in place, the screen protector is crystal clear and doesn't interfere in any way with using your watch. Which is really all you can ask for. I'd like these to be ever-so-slightly wider. They don't quite cover the entire glass face of the watch. (They're short by maybe 1mm.) That's fine from a usability perspective and you can barely see it but I think a bit more edge-to-edge coverage would help improve snag resistance. These sorts of protectors, for me, always seem to wear out at the side because a bit of lint or dirt gets under the edge and destroys adhesion, so having the protector right up against the metal would help. Anyway, that's that. Easy install, great clarity, does what it's supposed to do. No real complaints except the 8 hour set time, but even that is not a very big deal. Good product.

Product film is slightly too big for the watch face. Adhesive seems to make the screen look milky. I think I got a bad batch. Since I got some with spots on them. I will buy this product again. I had this same product on my garmin instinct, crossover. It has always healed from scratches and was clear. Hopefully they can figure out what is going on with there product of film. I may have to buy another. If this film peels off. I don’t want to give a bad review. Yet I think there is room for improvement.

These are the best made screen protectors you can get for your devices. Watches, phones, tablets, the ArmorSuit covers it securely for you! I use this brand exclusively now and have for probably the past 8 years, I just can't say enough good things about them. What I appreciate most about the watch covers, is they typically send you a sheet of 6 screen protectors so you can change it out whenever you need to and the screen protector isn't bulky or unsightly. Installation is very easy too, just spray on the solution to your device's screen, moisten your fingertips with the same spray and peel the protector from the backing sheet and apply it to your watch (or other device) and gently squeegee the liquid out from under it and let it dry. Boom, you're finished. As always, 5 stars for ArmorSuit.

Bought based on reviews but very disappointed. Installed as per install video but the screen protector doesn't adhere to curved screens well. Bought for my versa 2 and only got a week out of it before I had to put a new one on.

These are easy to install and have worked well. No complaints with ArmourSuit for any of their products we've used.

Fast shipping, easy to apply. Very pleased

It’s just a plastic…. It’s not staying on the watch