ESP32-S3 7inch Capacitive Touch LCD Development Board, ESP32 with Display, 800×480, 5-Point Touch, Up to 240MHz Frequency, Supports WiFi & Bluetooth, with Onboard Antenna

This is a super useful combo for inventive types - you get all the main connector types you want with a nice touch screen and the resolution is very good. I used it to replace the display on my exercise bike and the new screen is in some ways a lot nicer than the old one. The wiki is full of information and the board has good support in Arduino IDE and VS Code. The build quality is excellent and there a several choices of case that are commercially available or that can be 3D printed. This thing is great, the screen speed is good, the connectivity is excellent, the documentation online and tools support is good. I am very happy with mine.

This little device has more interfaces than you can shake a stick at, making it useful for all sorts of purposes. The screen is clear and fairly bright, and the touch seems to work well. That said, this is NOT the place to start for beginners. I've done a lot of ESP32 development in the past, and yet it was still very frustrating to get this working with Squareline Studio and PlatformIO. Available instructions and documentation is very fragmented with huge holes;. expect to be very frustrated. But if you develop the right skills and persist, the result can be very impressive.

Another high quality product from the Waveshare folks. This thing has lots of interface. I myself could use more IO bits, but then again most of the interface will be over RF, so no big deal. Very clear LCD display, lots of information out there on it too. This is a very nice item. The only thing is the LCD sticks out from the PCB. Not a problem when you mount it, but before that it's a bit fragile. But this is a user thing, not a Waveshare thing. But yeah. I like it! And I like Waveshare. I like the amount of information they put out there on their products. Yep, I'll end up buying some more I'm sure. But like the others, you need to know what you're doing with it.

Like other reviewers have mentioned, these can be quite tricky to get working...and I'm not a noob to embedded systems programming. My main complaint with them is that the ESP32 simply doesn't have enough internal memory bandwidth to effectively handle a screen of this resolution. Full page LVGL redraws will occur at under 2fps...plus it can't even drive the actual screen at anything close to the spec 60Hz. The ESP32 is incredibly useful for a lot of things, but driving large screens is not one of them. Just because you can doesn't mean you should! An Allwinner V3s with a lean Buildroot config easily beats the socks off this...in both boot time, and GUI performance. But then again, the V3s has closer to 1,600MByte/s DRAM access, compared to the 40MByte/s FLASH access of the ESP32. (ESP32 runs everything from FLASH; the V3s can copy everything to DRAM and run it from there.)

I am a reasonably experienced amateur coder for embedded devices, but this was impossible, even with Grok's and Chat GPT's help. Grok literally said "Quit wasting your time and go with a more reliable board" Chat GPT was a little more optimistic, but in the end the unit ended up useless. The company documentation is poor, with little explanation how to use their demo programs. Neither Grok or ChatGPT could get them running.

I bought this to build a replacement electronic unit for my broken elliptical machine. Really nice device that uses the LVGL graphics library. For Mac you have to load a device driver for the serial link for programming etc. which comes from a non-English language website that will give your IT people a heart attack but seems to work OK. Not much I/O left over after the needs of the LCD means no brightness control (unless you add wires to the PCB) and you have to share the I2c with the touch panel which uses the old I2c driver and no mutex. Overall fantastic for my application.

I purchased the Waveshare ESP32-S3 Touch LCD 7" board for a commercial HMI project and unfortunately cannot recommend it for serious development work. The display itself works, but the touch system and supporting documentation have been a major source of frustration. Issues encountered: Touch controller initialization problems with the onboard GT911 touch controller. Documentation is incomplete and often does not match actual hardware behavior. Critical board functions rely on undocumented support circuitry and I/O expansion hardware. Multiple examples use different initialization methods with little explanation of why. Troubleshooting requires digging through source code, GitHub issues, forums, Reddit posts, and third-party examples. Official examples work differently than ESP-IDF implementations, making it difficult to develop a clean production application. Hardware resources are shared in ways that are poorly documented, causing conflicts when integrating additional devices. Many community discussions report display working while touch functionality fails during initialization, which matches my experience. Waveshare's own newer display revisions have changed support hardware and initialization methods, increasing confusion for developers. Layout and image design functions are easy, ui. with ESP-IDF platform. Failed GT911 and CH2244 failed. Same price we got a FocusLCDs screen board STM32.

The size and build of this display is perfect for creating home dashboards. Great compliment to Home Assistant and an excellent value. The Waveshare Wiki outlines everything you need to know about the configuration options. You will need some knowledge of ESP programming and LVGL design.

Received as advertised, for the price I think it’s a great start if you are interested in esp32 combination with lcd and touch. My advice from my journey sofar: - start with the docs waveshare have on their website - dev environment: visual studio code ide + isp-edf extension - get the code from the demo preinstalled on your esp32 (see docs) - this will give you a good starting point for playing around with lvgl and custom integrations.

Niedopracowany produkt. Nie da się w żaden sposób użyć Wi-Fi i wyświetlacza jednocześnie na wbudowanej pamięci. Wi-Fi zakłóca ekran nawet na najmniejszej mocy. Na tym ekranie uruchomisz swój projekt pod warunkiem, że nie korzysta z Wi-Fi. Z tym problemem nie poradził sobie żaden AI. Gotowe biblioteki nie radzą sobie z ttm problemem, ręczne zmiany również nie dają wyraźnej poprawy. Jak można sprzedawać tak niedopracowany produkt?

Davvero ben fatto, facile da programmare, un sacco di librerie disponibili. Pienamente soddisfatto

Good

Very nice device