Floorseal Granite Sealer - 1 Litre

Description

Granite Sealer is easy to apply, 1 litre can cover an area of up to 30m2 in one application. Prior to application make sure any surface is both clean and dry. Apply in small amounts and spread over the surface with either a microfibre cloth, paint pad, brush or roller. Leave for up to 25 minutes but during this time do not allow Granite Sealer to dry on the surface – add more product if required. Remove all excess sealer with clean dry microfibre cloths and buff dry. Granite Sealer will not fully cure for 24 hours, keep the area dry during this time. Do not apply to damp surfaces.If required Pre-clean with Stone Floor Cleaner , maintain the surface with Ph Neutral Floor Cleaner .Directions for Use:Make sure the surface is clean and dry.Apply with a paint pad, roller, brush or for best results use a microfibre cloth.Allow Granite Sealer to dwell on the surface for up to 25 minutes, do not allow the product to dry during this time.Add more product if required.Remove all excess with microfibre cloths and buff the surface dry.The product will reach full strength within around 24 hours do not wet the surface during this time.Maintain with neutral cleaners, avoid harsh chemicals.Coverage and Wear:30m² per litre depending on the porosity and condition of the surface.Please Note:Never apply to damp surfaces. For external applications do not apply in wet or damp conditions or if it is likely to rain. Always try product in an inconspicuous area to check suitability. Do not apply to glazed tiles or non-porous surfaces.Important:Saftey / PPE SuggestionsRubber gloves, protective eye-wear & face mask should be worn for safety.Handling and Storage</b