Technical Details 1 ton Electric hydraulic floor jack with tire inflatable pump Cross groove saddle prevent slipping from vehicle Rotating threaded rod can be spin out up to 75mm, makes cross groove saddle closer to lifting point Remove the safety valve screw with hex wrench and rotate it clockwise, please remove the car lift till it descends to its original position. Then tighten the safety valve tightly and tighten the dustproof plug. Small size for easy storage a.For Jack: Input Voltage: 12VDC Current: 13A Fuse: 15A Max Loading: 2200 lb (1000 kg) Lifting Height Range: 6.1 in. -17.1 in. (155mm-435mm) Power Cord Length: 11.4 ft. (3.5m) Working Temperature: 5 ℉ ~ 122 ℉ (-15℃~+50℃） Jack Size: 12.6"* 7.5"* 6.7" Weight: 11.3 lb(5.15kg) b. For Inflatable Pump: Input Voltage: 12VDC Air Flow: 9.2 gal/min (35L/min) Working Temperature: 5℉ ~122 ℉（-15℃~+50 ℃） Current: 10A Max Pressure: 10BAR/150PSI Hose Length: 23.6 in. (0.6m) Cylinder Diameter: 25mm 1.Jack couldn't work Check whether turning on the auto power The pilot lamp for the cigarette lighter plug is on or not ,if it is destroyed,please replace it,the try again Whether the plug for the power cable of jack is loosen with the jack or falling off 2.The pressure rod couldn't be risen Confirm whether starting the motor Check the direction switch for up/down Check whether the lowest temperature is within the rang of suitable temperature for this product,if not please preheating the jack ,macking the hydraulic oil thaw Not using for long time maybe cause the oil is not smooth,please first up switch for starting one minute,the press down switch Packing List: Electric Hydraulic Jack * 1 Instruction Manual * 1 Six-angle Spanner * 1 Fuse * 2
L**N
Five Stars
It was a great experience, totally better than the last product I bought. Would recommend.
Trustpilot
3 weeks ago
5 days ago
