Floorseal Block Paving Cleaner, 25 Litre

Description

Block Paving Cleaner is a non-acidic formula for the elimination of dirt, grime and organic deposits from block paving areas.Apply Block Paving Cleaner in generous amounts using a low-pressure sprayer or watering can. Allow at least one hour of dwell time for the product to take full effect, during this time the product must not be allowed to dry out. Either apply more product to keep your block paving wet or lightly mist over the area with water. For the best result wash down the area with a jet washer. For difficult areas the dwell time can be extended up to four hours and the strength of the product adjusted. This product can be used neat.Directions for Use:Always carry out test application in an inconspicuous area prior to use.Apply to the surface using a low-pressure sprayer at a mix of 1:4 with clean water.Allow one hour of dwell time or for best results up to four hours. Do not allow the product to dry out by misting clean water over the surface or adding more product. For best results allow a longer, up to four hours dwell time.Only spray the areas you wish to treat, rinse down areas you do not wish to treat or other adjoining areas like lawns etc.For very stubborn marks like black spot etc you may need to reapply.Block Paving Cleaner can be used at higher concentrations & can be used neat.This product can cause discoloration of clothing so only use suitable work clothes or older clothing items.Please NoteThe chlorine content of this product can discolour clothing and/or effect surrounding areas i.e. lawns. Wash down adjacent areas with clean water if required.ImportantSaftey / PPE SuggestionsRubber gloves, protective eye-wear & face mask should be worn for safety.Coverage & Wear50m² per 5L at a concentration of 1:1 this figure depends on the porosity and condition of the surface.Aftercare & MaintenanceReduce the need to repeat clean b