RS Components Raspberry Pi 3 B+ Motherboard

I just received this today. It came in a new box, sealed, but no anti-static bag. ??? I added a chip and plugged it in and it works. It complains about low voltage. I tested the voltage on a Raspberry PI GPIO Extension board and get a reading of 4.97 volts from the 5 volt pin to the ground next to it. I also get 3.27 volts on the 3.3 volt pin.Seriously?!!?? It's tolerance is less than 1%??? It's no wonder pretty much every power supply sold for the device has negative reviews about "low voltage".As for using it, I did find one USB cable that could not hold up to the boot of the RPi. The rest work, but the Pi complains on all but one. It's a short cable that came with my WD Passport and it's much thicker than all my others. It works and I don't get voltage complaints.The system boots up 2018-11-13-raspbian-stretch just fine. It asked for the WiFi user name and password and did the updates. It took a while to update, so I fixed supper and it was done when I got back.It appears to be doing well. I have tried two tutorials, both of which start by having me use "git" to install software for the tutorial. Both time, Git could not find the packages. I suspect that the tutorials are a little old, so I'll keep plugging at it tomorrow.I used it on an Ethernet direct connection and on WiFi. I turn off my WiFi when on the Cat-5 because I don't know what it does with it when it's also wired.When I bought the PI, I thought it was another micro-controller like my Arduino. I didn't realize it's a full computer running Linux. I see it is good for Ham Operators (that's me! ;) so I'm sure I'll find something to put it to the test with.So far, other than the low voltage, which I seemed to have overcome with the low-loss USB wire, I don't have any complaints. I'm looking forward to playing with it and hopefully, running a little SDR.

So, I'm not doing anything groundbreaking or revolutionary with my Pi. I have 2 SD cards I swap out depending if I want to use it as a small extremely low power PC or an emulation box. It does both well. It lacks a little in power for things like YouTube at 1080p, but you bump it down to 720p and you'll be having a good time. Also, for emulation, 720p is the way to go. I was having hangups and such on N64 games, until I went down to 720p and now things are buttery smooth. Although, it could just be me and my poor choice of power supply. That said, I love my Pi.

I decided to setup Pi-Hole on my network. Pi-Hole is basically a DNS sinkhole (DNS "server") that blocks ads and tracking network wide without needing client side software. It can also improve the security/privacy of DNS requests.For my setup I am using:- Raspberry Pi 3 B+- Samsung 64GB Evo Plus microSDXC card- iUniker Raspberry Pi 3 B+ Case- Mackertop 5.25V 3A Micro USB Wall Charger AC AdapterThe only problem I ran into was trying to use a charger I already had which was supposed to support 5V 3A but the RPi would constantly report low power, about every 2-5 seconds. It seems the RPi 3 B+ (especially) is picky about the power supply used. The one I listed above and the CanaKit 5V 2.5A supply both worked for me and had no issues delivering enough power. I chose the power adapter I am using as it fit better on my power strip and had some additional juice.I installed:- Raspbian Stretch Lite- Pi-Hole- cloudflared (for DNS-over-HTTPS aka DoH)Once installed and configured, which didnt take too much effort or time, I had Pi-hole running of this RPi and not only blocking ads and tracking network wide across all of my devices but also encrypting my DNS requests using DoH.I added all the ticked lists from Wally3k's site, increasing the number of domains to block from the out-of-the-box ~120k to almost 800k.This RPi 3 B+ handles it with ease. CPU usage is so low that often I wonder if the readings are correct, usually sitting in the 0-2% range if I am not interacting with the web GUI too much. RAM usage was ~7% with the default ~120k domains to block, which went to ~12% with the now ~800k domains to block. CPU temps sit in the mid 40c, peaking at about 49c which is well under the thermal threshold for throttling (which is 70c I think).Granted this is not being used on a corporate network, but I am amazed at the performance of such a low powered and cheap machine. Very glad I got it and would highly recommend both in general and for my specific intent, as a Pi-Hole server.

Works like expected. Sad it's still over priced. I needed this exact pi and had no choice.

Good price, good performance, recommend.

es bueno

After having used this for a while, I have come to say that it falls right into the one of the best for beginners category when it comes to buying your first Pi.Obviously the price is way too high for such a board, but I was lucky to snatch this for $39 a little while ago. It's basically your all-purpose maker computer: make what you want to make with it, whether it be a home media center, experimental desktop PC, or a brain for your next robot.

I bought this for my son as a Christmas present and he loves it . To be honest even though I am a decently tech savvy person I wasn't really sure what a Pi is used for . My son on the other the other hand had a half a dozen ideas for what to do with it before we had even finished Christmas dinner . He said that his flatmate uses one as a "brain" for a robot he is building and another friend at school has one that serves as a multimedia streaming and gaming device that he mounted on the back of a TV . So , I would call this the perfect gift for that smart kid that you have trouble buying presents for . I have seen a multitude of accessories and gadgets here on Amazon that are specifically designed to be used with a Pi for all sorts of projects . I know that there are many companies out there make a similar tiny motherboards but according to my son this the one to buy .

Einer von vielen Raspberrys welche ich verwende. Funktion tadellos. Lieferung schnell wie angegeben.

Easy to install

Sigue siendo un modelo estupendo, muy versátil en alimentación ya que aunque roza necesitar 2.5A se puede alimentar con un powerbank de calidad por ejemplo. Lo he usado para una fabricar una máquina de retrogaming y va perfecto. Parece que vamos volviendo a la normalidad en los precios, aunque sigue por encima de lo que costaba hace no tanto... Junto a otros modelos ha estado a precios de locura, donde compensaba irse a un miniPC u otras SBCs según el tipo de uso. El modelo 4 es bien conocido también pero mucho más estricta con la alimentación (famoso tema de USB-C non-compliant según versiones). No he tenido oportunidad de probar todavía la versión 5, pero no hay que volverse loco... para según qué aplicaciones puede ser suficiente 3B o 3B+, versión 4 o versión 5 según lo que cada uso requiera.

Ho comprato questa raspberry per realizzare un videogioco anni 80/90 per un cliente che aveva una Pandora's Box. Ho dovuto fare alcune modifiche al case della pandora's ma tutto sommato devo dire che è venuto un bel lavoro. Il cliente è rimasto soddisfatto anche se c'è stata molta attesa sulla spedizione. Devo dire che i prezzi sono raddoppiati se la si voleva subito. Ho preferito aspettare 30 giorni ma almeno l'ho acquistata ad un prezzo giusto.

Turned this board into a dedicated DNS server running Raspbian OS and Pi-Hole. Which is what I have connected to two of my routers to block ads, malware, and unauthorized access. Also have a kuman 3.5" LCD connected to the GPIO which serves as a HUD.