eXtremeRate Full Set Shell with Buttons Touchpad Cover Compatible with ps5 Edge Controller, Scarlet Red Replacement Decorative Trim Shell Front Back Plates Compatible with ps5 Edge Controller

After mixing “Hope Gray”, “Black”, and “Scarlet Red” complete shell kits and buttons for the Dualsense Edge controller, I was pleasantly surprised to discover the pieces all fit very well together.I had never did this before and found the instructional video was nearly sufficient to completely explain the process. There were 3 points in the installation video that became difficult. So I had searched for other videos and pieced together these other sources of information in order to solve the problems I was having. 1) The shoulder (trigger buttons L2 &R2) had springs that popped off when disassembled. These springs were not mentioned in the video at all, probably due to my Edge Controller being a different model than the one in the video. I was able to find another video source that completely described the installation of these springs. 2) The shoulder (trigger L2 & R2) buttons have a part inside the button that needs to be removed, but the video doesn’t completely describe how to remove these parts. I was able to piece together information from other videos to remove these parts from the buttons. 3) There were several occasions where the pieces would not fit together and I had to take them apart and reassemble them over and over until they finally fit. Patience was key here.These shell kits do not come with all the tools you may need, such as tweezers for electronics, hairdryer/heat gun for the touch control pad, and a magnetic pad for organizing all the screws that are removed in the disassembly process, and a magnetic screwdriver is a huge bonus.The installation process took me just about 3 hours to complete. I did not replace the touchpad. Had I replaced the touchpad, I assume the installation process would’ve taken another half hour.These complete shell kits are a great value when you consider the cost to have someone build a custom controller. I would’ve easily spent an additional $100-$200 dollars more if I had this custom built.Overall the look is great. I got everything I was looking for in controller with a customized shell. The pieces fit well together, (admittedly) after several attempts of reassembling them. I was fortunate not to have any unsightly gaps in between the pieces.The quality is great and is similar if not equal to the strength, thickness and durability of plastics used in a controller directly from PlayStation.Much like the original plastics that came with the controller, I found the grip of this shell to be rather slick. So I installed some thin, rubberized grip, which makes for a very nice non-slip grip. This grip also helps with keeping the controller from sliding around on a hard surface like a table.Now I’m very happy to have a controller that I love the look of!

Great shell good value for the money i didn’t want to buy another controller in black so i did the shell swap instead also didn’t use the bumper and trigger buttons that came in the pack a ction buttons as well from the same company I got the clicky buttons 10/10 for me install was a little scary first time taking apart a dual sense edge but there are handy videos from the company that helps you get through it I like it a lotMods doneHall effect sticks, black shell, clicky buttons, and play vital grips

Very fun project and provides a very nice contrast to my midnight edge. Wish there was detail in the D-pad and buttons but still love the result. The first pic is before, second is after, third is the contrast

I will say if you're not familiar with smaller screws and working with electronics this might be overwhelming for you. but if you're up for the challenger the results are amazing!I chose to reuse the factory touchpad and buttons but the shell itself is of a good quality and fits really well. the feel in my hands is as good as original shell. and the finally look is great! you would think it's a factory controller. if you have the patience, worth the effort!

It’s made pretty well for the price like all of their other shells. The soft touch feel is also nice when holding and still allows you to grip the handles without worrying about it slipping or dropping. My biggest problem is how flimsy the back piece is when clipping in because I snapped two of them (one of them was a replacement) and after I finally got it to go on it still didn’t sit flush like it should’ve. Another issue that all of eXtremeRate’s shells have is the paint has already started rubbing off on the grip areas and I’ve barely even used it for maybe less than 5 hours total.

Got one red and the black one and mixed the colors. Also got a one that changes color depending on the light. They don't snap together very well on the lower left, but it doesn't affect game play. Good quality plastic and the video is easy to pause for step by step assembly. Bought stick on grips because they tend to slip a little. I'm very happy with the versatility, look, and ease of assembly. I'd say I'd buy again, but I only have three edge controllers.

Images 1&2 is what I had in mind the second is what I ended up. Purchased two full kits ended up being able to use two pieces of each kit. So here we go.... First of all they have an excellent online resource in their YouTube video as it does incrementally go through the entire tear down and rebuild however this wasn't as useful as I thought it would be simply because the pace at which the reassembly occurs is much on screen is faster than I, a novice at doing such things could go and therefore found myself constantly having to go back and forth in the video trying to make sure I didn't miss a screw or a piece which I did several times. Then when I got it all together with the new casing it did not align correctly 😡 the option button and share button recessed to the point where it was difficult to press them the faceplate also did not align correctly and constantly wanted to pop off 😩 (Now this could have been due to my inability to resemble the controller as intended it is trickier than it may seem) Ultimately after three teardowns and two failed reassemblies is I decided I would just go back to the factory prices. And luckily I was able to eventually get it reassembled and aligned correctly in the end was even able to use the backplate and the faceplate just not in conjunction with the other shell pieces.

Bought a used dualsense edge for cheap and was able to change the shell and it looks good as new! Works great, has remained sturdy after a few months of use, I've taken it apart a few times to change other parts and it still goes back together, would definitely recommend, I will say if you do not know what you are doing you have got to be careful or you maybe break it.