Hemmer feet are very useful tools, but are rarely seen in useful sizes this large. The Lock Wide Rolled Hemmer Presser Foot Set includes a hemmer that screw onto the included snap on presser foot. Simply pre-press the start of the hem, pressing under twice the width of the hem and feed it into the guide. The guide on the hemmer turns under the raw edge and allows it to be easily stitched into place, giving you professional looking turned hems on most medium to heavy weight fabrics. MACHINE FEET GUIDE: The first question to answer is how old is your machine? Most machines made since 1980 use snap-on feet (Except Berninas, which have their own style of attaching, and therefore need an adaptor). Does your machine's foot screw on or snap on? If it doesn't use a screw to attach, then it's a snap-on. If it screws on it is important to know whether your machine is a low shank, high shank, or slant needle machine. If you are not certain, you can measure using the simple instructions below: To Measure: When presser foot is down, measure the distance from the bottom of foot to screw-hole that holds the foot onto the presser bar. Singer slant is for slant needle machine only. A high shank machine measures approximately 1 1/4" from the screw to the bottom of the foot. A low shank machine measures approximately 3/4" from the screw (small dot in picture above) to the bottom of the foot. PACKAGE included: 1*4/8" hemmer foot (13mm wide rolled hems) 1*6/8" hemmer foot (19mm wide rolled hems) 1*8/8" hemmer foot (25mm wide rolled hems)
Trustpilot
1 day ago
3 weeks ago
