How to replace the filter Locate the filter in the refrigerator Press the latch to open the filter cover Pull the filter downward and remove it by rotating it 1/4 turn to the left Write the installation date on the new filter as a reminder of replacing the filter within 6 months Remove the sealing label from the top pf the new filter Position the filter inside the filter holder and slowly rotate the filter about 1/4 turn to the right until it stops and is locked into place Close the filter cover Run water through the dispenser for 2.5 gallons (about 5 minutes)to prime the filter before use.Discard the purged water Reset water filter system OPERATING SPECIFICATIONS: Min. operating temperature.................0.6°C/33°F Max. operating temperature.............. 38°C/100°F Min. working pressure.................. 207 kPa/30 psi Max. working pressure............... 862 kPa/125 psi Rated capacity.................. 1136 litres/300 gallons(6 months) Flow rate.................................... 1.9 lpm/0.5 gpm Note: Install on COLD water lines only Install a pressure limiting device and water hammer arrestors to internal water pressure exceeding 80PSI(552kpa).Refer to Uniform Plumbing Code,Sections 608.2 and 609.10 Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system
Trustpilot
3 weeks ago
2 days ago
