ProtectaClear 16 Oz. Clear, Protective Coating for Metal (Pint)

I used ProtectaClear on a brassy bathroom sink that gave me fits with its tendency to tarnish and stain. Cleaning it was living H__. Regular brass/copper/silver polishes wouldn't get it done. I'm ex-military, so I've had lots of practice. The only thing that would clean it up was applying a heavy-duty abrasive, which basically resurfaced it. My bathroom has two identical sinks. On one, I used Sink Wax; on the other, I used ProtectaClear. The wax was a lot better than nothing, but over time, it gave out, and that sink got new, ugly stains all over it. The wax might have worked if I had cleaned that sink and reapplied the wax every few months, but I have a life outside of sink cleaning.The picture shows the ProtectaClear sink after 3 years. It looks exactly like it did the day I applied ProtectaClear. I did go the extra mile on it. I followed the instructions to the letter. I did all the prep. I applied 3 coats. I was careful not to drop anything into the sink to avoid nicking or scratching. I kept a hand towel beside the sink. Every time I used the sink, I wiped it dry. That probably wouldn't be necessary in most cases, but my water is very hard and leaves spots on anything and everything when it dries. ProtectaClear repels water, so a half-second swipe with the towel was all it took. Maybe I didn't need to dry it, but I wasn't taking any chances.The smeared look of the sink surface is the result of having to clean it with abrasives. The ProtectaClear didn't cause that.I just spent two hours cleaning the other sink. (That's par for the course.) I'm about to apply ProtectaClear to it.I strongly recommend NOT buying metal sinks. If you get stuck with one, this is the best solution I've found.

I make coin rings and other coin-centric jewelry. And, if you’ve ever worn copper, you’re likely aware of the green residue around your copper adorned skin. This product is an excellent way to protect against corrosion and stops residue from getting on your skin. As a skin safe sealant, you’ll enjoy your copper jewelry for years and years. I usually apply two coats- waiting an hour between coats, and waiting a couple days to ensure full curing although the items can be handled after an hour of application. The sealant can be applied other materials needing a clear protective seal against fine scratches and leaching and to maintain its original shine/patina. Final coating is not brittle and has some flexibility. See the application types and directions on the can. Use in a well-ventilated area and read the safety information. PPE recommended.

Great sealant. Watch the YouTube for tips on applying the product. This company makes different types of sealants which I will try out in the future thanks to the ease and beauty of this product.

Used this product to seal the metal on a 100+ year old brass bed that took MANY hours to clean and polish. Directions state you can use a sponge brush or natural bristle brush to apply it. I found the natural bristle brush to be far better (disposable ones from Home Depot) as they do not produce air bubbles as does the sponge brush. Do be diligent in your removal of whatever polish (I used Maas) you choose. I found denatured alcohol worked well. This product goes on well and does self level. It also does self anneal as claimed. The reason for deducting one star is that it does dull the shiny brass glow somewhat that the polishing produces. This is not a deal killer for me, as I really don't want to have to repeat this process in the future! I cannot comment on the longevity of the finish, as the project has just been completed.Update 3/2023 - it has been 5 years since my initial review. I'm pleased to say that the sealed brass still looks just as good as it did after the initial application. I have also restored and sealed two brass oil lamps with this product and have seen the same great results.

I got a copper kitchen sink in May 2022, and love it. However, it tarnished very quickly because of the heavy use. I tried all kinds of products (Brasso, Never Dull wadding polish, copper polish sold by the sink maker, and more - including ketchup, which works!) They all got it clean, but it wouldn't stay clean. So then I tried all kinds of waxes and sealants - nothing worked. I was about to give up when I found ProtectaClear. I sealed my sink a month ago and it still looks like a brand-new sink. If you know copper, you know this is a miracle.

Levels nice but would not recommend for high usage parts

Used to apply protective coat on polished silver trays and tea pot.

Ok I bought this previously to try on sterling jewelry I bought and resold. A lot of people have allergies to some of the metals the silver is mixed with plus it helps prevent tarnishing, etc. what I didn’t know I would find while I prepped the jewelry is plastic or fake stones before I sold them. By doing the prep, the fake or plastic stones would sort of melt like. I didn’t know my supplier had been cheating me so this is how I found out. Plus it makes the stones POP in color! My buyers for the most part like it but I’ve had a few concerns about removing it and I’ve emailed the company and I haven’t heard back from them yet. Hopefully soon. Sooo I used up the smaller can and figured it’d make more sense to get a bigger one since I’ll be using it in the future to treat all my jewelry.