Semi-direct operated 2/2 way JP Fluid Control solenoid valve with nylon body, 1 inch threads and a 24V AC (50Hz) coil. The function of the solenoid valve is normally closed (opens when electrically energized).Suitable for systems with an operating pressure of 0 bar to 8 bar and a maximum temperature of 80 °C. The orifice is 25 mm and the Kv-value is 10.24. At 1 bar differential pressure (water) the flow rate is approximately 170.7 l/min.This valve has an EPDM seal, which is suited for (hot) water, steam and most basic substances. For oils and fuels FKM is recommended instead of EPDM. The coil (type CS2-024AC) DIN - A with connector is provided with the valve.Never connect the coil to the power supply when it is not mounted on the valve to prevent overheating.Solenoid valves are electrically controlled valves which open or close by means of an electric current through a solenoid (coil). As long as they are electrically energized they consume energy. They open and close quickly.Important: 1) Use clean liquids or gases. Solenoid valves are very sensitive to dirt. 2) Do not power the coil when the coil is removed from the valve. The coil will overheat 3) Make sure that the valve and seal is suitable for the application, the medium and temperature.
Trustpilot
1 month ago
3 days ago
