Woolwax® 24" Aerosol can Spray Wand with 360° Nozzle

Very happy with this product. Could not find anything like it locally, so I broke down and paid what I thought was a high price. However, after using the product I am satisfied with price paid for it. Delivery was extremely prompt even though not through Amazon Prime. Based upon the reviews, I stretched out the hose before hand to straighten it out. As I still felt it was a little unwieldy, I taped it to the end of a wire so I could control the spray direction while inside the car's frame. I found this to be very effective. Very pleased with the product. I would suggest wearing rubber gloves, as it does find its way out of the attachment - This is not the fault of the product, but rather the odd angles that I had to direct the spray.

I read some reviews that stated they experienced leaking. I never had that problem with 2 of these. The nozzle and tube were small enough, that I could use factory drain holes and not need to remove interior door panels (cards). The coverage was complete. I use a compressor and a bulk product gun to treat the rest of the vehicle, but for the ease of use and tiny nozzle access, these flex tube kits were $$ well spent. Perfect for door pillars,, and hood and trunk lids. An hours long job, became a minutes long job. Not cheap, but worth it.

I was concerned about the comments I read before buying this. I have used it for two cans of Fluid Film and it had high flow and spread the fluid great. The attachment to the spray cans was somewhat loose causing it to disconnect while using it. I simply reconnected it and it worked fine with minimum leakage. I believe the breakage and leakage starts after several reconnects where the plastic cylinder in the nozzle starts to bend/loosen/break. At that point, I plan to use the method someone else described of drilling a hole to add the nipple to the original spray can nozzle.This would be a great product if the nozzle was made of a higher strength plastic.

This thing was utterly worthless. First off it wouldn't even attach to the can properly, almost like it was just barely the wrong size. This made a mess at the can as some will leak out every time you press down.Also the 360 picture makes it look like it comes out the sides. It come out more like s cone shape which greatly limits its ability to coat a hard to reach opening.

I had read some of the reviews on this product and placed my order with some trepidation. To stop the fluid-film leaking out of the bottom of the 'flange' I cut some narrow strips of duct tape and made a seal between the flange and the top rim of the can. This setup worked perfectly for me to spray difficult-to-get-to locations under my car - even though the air temperature was around 0 C (32 F). For the price I paid it for it ... it exceeded my expectations.

Works well to spray FF into door panels, frame rails and rockers as well as other confined spaces. It is a "male" piece and will only fit "female" cans. Did not work with my T9 or Amsoil HDMP cans but works perfectly to get Fluid Film into those hard to reach places. Price seems rather high but haven't found any alternatives out there either.

'Sup Mellow -This here extension wand is a little apparatus that you plug into a can of Fluid Film so that you can spray it up into all sorts of hard to reach places that never see the light of day. If you don't know what  As11 Fluid Film 11.75oz Spray Cans  is - go buy a case of it RIGHT NOW and spray it on everything you own that is made out of metal. Spray some on your face if you're really 'bout that Fluid Film life. Anyway, moving from the Pacific Northwest to Indiana, I was horrified at the number of rusted out trucks I saw driving around. I decided to keep my Taco drippin' in Fluid Film to try to stave off the inevitable - or at least hold things over until I can finish grad school and get out of here. This little extension makes it easy to spray the fluid film up into the frame of my truck, although it could stand to be a little longer and stiffer. These guys seem to have a monopoly, so $17 is what you're gonna pay no matter what. Personally, this looks like it could cost no more than $1.25 to assemble, so we're really getting gouged here.

I use this to lubricate and protect my jetksi motor for salt water corrosion. After extensive research on what type of lubricant/anti-corrosive i should use on my engine in my PWC (wave runner/jetski) I concluded this was the best, AND IT IS!!! Product does not deteriorate rubber and plastic parts of the motor and is safe to apply to everything. I have logged over 20 hours of salt water use and abuse and my engine bay looks brand new.I have also applied it to rusty/weatherd tools and i am amazed. The second it is applied you can see it going to work as it bubbles and penetrates the oxidized and corroded metals providing excellent lubrication and preventing further corrosion.I have ordered almost half a dozen of these as i use it for everything. Highly recommended!

Used it once so far and seems to work great!But way overpriced!!!

J’aurai bien aimé essayer le produit, mais au moins le service à la clientèle a fait un bon suivi et à réglé le problème.

There were 3 issues with this item. First, it is coiled tightly when you get it and the tubing has a real memory, so I had to heat it to straighten it. Second is mine leaks at the nozzle where the tube fits in. Third, it is rather pricey compared to what it costs in the US. Other than those things, it does get into places where not much else can and so will save you money if you are using to rustproof a car in that it will get where even professional rustproofers will not get such as in tight quarter panels.

If you want to blow Fluid Film all over place, buy this product. The diameter of the stem of the nozzle that gets inserted into the top of the spray can is too small, so the stem does not seal properly. Save your money. The product has maybe 20 cents worth of material in it. Totally useless crap. I’d give it zero stars, but that’s not an option.

Works well and no top of can leakage