maXpeedingrods 92mm Throttle Body for LSX LS1 LS2 LS3 LS6 LS7 for GM Gen III with TPS IAC 4 Bolt | for GM Gen III

Exactly the same as the Jegs throttle body or any other that look the same like this. Good quality, has a lip for the intake tube to catch onto so it doesnt blow off. I would like these to have a slightly better lip for the intake tube as for less chances of the charge pipe to pop off under high boost. Will see what happens.

Upgrade from stock will see

Works with truck accessories & ls3 intake with a tb spacer. Sensors havent been an issue. I did replace the tps with one from the parts store right off the rip though. Other than that, works great.

Throttle positioning sensor went bad within 800 miles. Also done a smoke leak test and it leaks through the iac.

Good price! I ended up not even trying to use the included TPS sensor, and opted to run the OEM one from my old throttle body. The IAC sensor I used as the one on my old unit was rusty. First start with it worked fine. No issues other than the whistle that I expected since I've seen other reviews on this exact throttle body. I plan to eventually use a dremel and smooth out the IAC passages to lessen this. Also, the vacuum port hose was also just stuck in the hole and popped right out with minimal effort. Again, this was something I read and expected from other people. I ended up taking an 1/8" NPT to -6AN fitting and threading it into the hole with no issues and installed a cap on that port since I will not be using it anyways. Lastly, the writing of "92MM" on the throttle plate was machined crooked on my unit. Don't really care as nobody will ever see it, but it's worth mentioning.

GARBAGE!!!!!!!! put on truck and made it instantly rev up to 2400 RPM replaced with a similar style summit racing one and it fix the issue and idled normal

The physical throttle body is okay, the cruise control connection is too small so it doesnt stay on, and the throttle position sensor is clocked wrong. The main problem is both sensors failed about a week after i installed it. Also the throttle spring is way too strong. I removed one of the springs and now it feels great.

Have not in stalled it yet but it looks like a good quality piece

Junk don’t buy.

الثروتل عطلان فيه مشكله في الايدل و التي بي اس وثقيل جداً في الدعسه و اتمنى لو يرجعه البايع

Cheap junk buy a Holley