JONSBO D41 MESH Black ATX Computer Case, ATX/M-A.TX Mainboard/Support RTX 4090(335-400mm) GPU 360/280AIO,Power A.TX/SFX: 100mm-220mm Multiple Tool-Free Design, Black

An awesome case with a few hurdles to build in First the case is awesome and can unofficially support a 140mm front fan. I was able to run two 140mm bottom fans with an ATX board but this is very dependent on to our motherboard and what headers on on the bottom. For me it was the fan headers so I just had to plan carefully The case also supports 240 aios with ease, again, depending on your vram heat sink. 10/10

Love the case. I had the King 95 Pro before this. Don't get me wrong, it was a good case. It's just way too big and heavy. This case was easy to put all my stuff in, and everything fit without a problem.

It is a well made case, painted well, with good fitment, has no sharp edges and requires no more than a Philips screwdriver to build in. It is about as small as a full ATX case can be and still accept a large graphics card and a 360 AIO. Part of the reason it is small is that the PSU mounting does not require a wasteful bottom compartment. Instead, the PSU is put into a space that is typically not utilized. So the space utilization is very good. It seems clever. But one thing I didn't like was that with a roof mounted 360 rad, the PSU hot air output feeds into the 360 rad which reduces the AIO effectiveness. You can easily build a shunt/partition that will direct the PSU air to the front mesh panel (cardboard/tape would work). Unfortunately such a shunt affects the air path to AIO rad. Also the lid on the roof is meshed but fairly finely. Likewise the floor has a mesh that obstructs the floor fans. The inlet sides of the floor fans are close to the floor mesh and consequently noisier. The end result is that IMO, the design has unnecessary airflow restrictions, this matters a lot when case size (and hence surface area) is reduced but the amount of heat energy that must be vented is still high. This can be partly compensated for with higher fan speed but results in more noise. So it is well made case, small is size due to good space utilization, easy to build in but with air flow issues that result in more noise. For me, the noise was the deal breaker.

The thing that sold me on this case was the compact size for a bottom intake fan layout. It’s full ATX, but it’s as compact as a mid-tower for my MATX set-up. Great airflow all around (the reason I got it was for more direct airflow for my gpu fans which helped lower my junction temps by at least 15 degrees). The metal is solid, which is great and surprising for the price range, because typically manufacturers cheap out on flimsy aluminum (this is good build quality). The downside: there is barely room for good cable management in the back of the case (I didn’t upload a pic because I don’t want to be judged)… sacrifices were made, but at least it’s out of sight. All in all I’m giving it a solid 4.75/5 (5/5 for Amazon’s purposes, but that cable routing layout needs to be re-evaluated by the design team.)

Generic case maker designs a case that has unique design copied from other brands. Except they elect to use poor quality metal which is both flimsy and easy to dent / bend. No included fans come with this case, another missed opportunity compared to other generic brands. Ultimately, I wanted this case for the size, it fits a full size ATX motherboard, 360 AIO, and ATX power supply in a compact form factor mostly found in Micro-ATX or ITX cases. In an effort to make their brand stand out, they created an optional LCD display which plugs into an available HDMI port on the back of your computer. They could have made this completely USB-C based with an integrated USB-C to HDMI connector and use a split USB-C front panel motherboard cable to keep the case clean. I wouldn't recommend this case based on cost - as the quality doesn't warranty it.

Excellent case and the build quality is solid as with most Jonsbo. Works excellent with AIO for cooling. Cable management is a bit tight, but not horrible. Putting it all together is fairly straight forward.

great, easy to build in, high quality build, looks incredible, one of the foam pads of the foot came off, but other than that perfect.

This is one of the smallest and cleanest ATX cases ... it looks slick and clean and has really great thermals especially in the humid country I'm currently living (Central America Belize) clip in front panel and back panel, PSU side rail that hides cables and PSU, can fit 8 fans and 360mm rads and supports most Air Coolers... one 120mm fits at the front if you opt out of the screen can raise the PSU to the top and have an extra fan... take a look at the build... it's a solid case... highly recommended just be sure to get a semi or fully modular PSU...