Nano Clearcoat"12 Month" Shine & Protect Car Polish Kit from Gloss Boss 365

Applied it as directed to about 1/4 of my 2010 Jeep Wrangler, I wanted to see how it would do before applying to the entire Jeep. It made all the light scratches in the clear coat just about disappear. It looked great until the first time I took it offroad, then holy smokes all the dust clinged to the area I applied the product. So I once again buffed with the microfiber cloths as directed, less dust stuck but still looks horrible, This last time I used a mechanical buffer with microfiber bonnets, once again its better but dust still sticks. So I've done some research and found that silicone based products are stubborn to remove, I've subsided that it will take many washings with dish soap and time for the product to finally come off my Jeep. I suppose the product is supposed to be a 12 month working life once applied to a car, so the worst that could happen at this point is to wait out the life of the product before trying something else.It made it look awesome at first application, and would probably work well for a vehicle that does not see dust.

W gave it to one of our employees to use on our truck, We told him to read the instructions carefully before using this product. He was also told to ask questions if he had any. It took him 6 hours to put the wax on and it came out dull. We called the mfg, and told him our sad story. He told us to use mineral spirits to take the wax off and them try to polish it. That did not work. I'm out nearly $100.00 and could have had the truck professionally detailed for,$150.00 I will never recommend this product to anyone I know.

I have been a nut case about shiny cars since the age of 20 when I got my first convertible.I have done paste wax from turtle to simonize to carnauba, compounding, glass wax.. and ya know what?This is probably the best bang for the buck, both $$$ and effort wise I have experienced in over 40 years.Follow the instructions (except skip clay bar on a newish car- not worth it) and REALLY spread it around or else you'll work harder than necessary and waste this precious stuff!My 2016 Lexus coupe feels like glass, and everyday crud just washes off, leaving a great shiny surface, which I of course proceed to polish cuz I'm nuts.

I applied the Gloss Boss nano coating to my 10 year old silver Toyota truck. This vehicle is outside 24/7 – never garaged. First I gave the truck a thorough washing and then a compound and polish with a DA polisher. I had clayed the truck recently so I did not use the supplied clay from Gloss Boss. I rubbed the paint down with a isopropyl alcohol / water mix to ensure that the paint had no residual wax. The paint was in pretty good condition, all things considered.It is a nice kit – fair quality applicator and microfiber cloths (I assume the clay is okay as well – it looks like any other automotive clay).Application of the nano coating was not what I expected. It was a thick opaque liquid – it looked like Elmer’s school glue. I put some on the applicator and rubbed it into the paint. It was thick and did not cover very well. It took about 10 minutes to do just the hood of the truck. The instructions say to cover a small area and let it soak in for 5 – 15 minutes and then to ‘activate’ the coating with a wet microfiber rag. I think the activating is really just using a wet rag to almost scrub the excess coating off. After activation, you buff out the remaining haze.This was a time consuming process. Doing one panel at a time it probably took me 25 minutes to just do the hood.The coating did leave a nice shine and the paint was smooth to the touch. A quick spray with the hose the next day did show nice water beading.The real test will be how well it lasts. I plan on putting an additional coat of wax on the truck to bring out a real shine. If it holds up I would say it is a very good value.

Trash the towels fell apart and the Nano clear coat just made my whole car look sticky and made it feel sticky and took me hours to get it off and nearly a year later it still ain’t all off

Heck of a product. If you follow the directions, there should be no issues. After a few weeks, the car still looks as glossy as it did at the dealership. Rain just beads off and the cars paint is still smooth to the touch. I cannot stress enough how important it is to follow the instructions. If you can do a regular clay bar with its own solution prior to the application. After the application, I still have half a bottle left over. Take your time with it as it will prove to be a bit time consuming but it is worth it. Great stuff!

The clay bar is not very good at all it left clay marks all over my vehicle so I had to go back to remove clay spots all over my car. Recommend buy a quality clay bar kit

I really like Gloss Boss 365 because it was easy to use and made my 2015 Jeep look new again. The instructions were clear and we just followed the steps. Now the paint is super smooth and shines better than other waxes that we have used and with less effort. My friends even think that I bought a new car. We used Gloss Boss on the windows and rain runs right off. I hardly have to use my wipers. There is still enough of the liquid to do our other car.