NineLeaf Wireless Light Switch Kit,Wireless Switch for Light AC 80~275V,No Wiring Wall Switch for Home Lighting,RF Remote Control Up to 400m,IP66 Waterproof Ideal for Bathroom,Kitchen,10A 1000w

I've installed a couple of sets of these now, and I'm very impressed with them. Ideal for situations where you need a handy light switch, but don't want to be chasing out plaster or drilling holes to run cable to them. The switches themselves will go anywhere that you have a few spare centimetres. Sticky fixing pads are included. The "fitting" part only involves the little receiver unit, which is the size of a couple of sugar cubes. You will need a modicum of electrical knowledge to do this. I'd say that if you understand the concept of "Live" and Neutral" and have the knowledge and ability of how to wire a three-pin plug safely, you should have no problems. But I can't stress enough: IF YOU DON'T HAVE THE KNOWLEDGE, CALL AN ELECTRICIAN. If you're looking to replace or augment an existing light switch in a normal UK domestic setting, then in all likelihood you will NOT be able to simply wire the receiver into the existing switch box at the wall. This is because the receiver requires both an un-switched Live (brown/red) and Neutral (blue) connection (to draw the power it needs to operate). The Neutral wire will not normally present at the switch. AFTER TURNING OFF THE CIRCUIT AT THE CONSUMER BOX, you'll need to expose the ceiling rose, and fit the receiver there. You should familiarise yourself with how the wiring in a typical ceiling rose is configured, and relate that to your own, before diving in. There are clear instructions included with the unit, and a couple of very handy little 'tool-free' junction blocks. Pairing the receiver with the switch(es) is very simple.

Wow, the wireless light switch kit is a brilliant bit of modern technology. I has allowed me to control a light at the top and bottom of a stairway going up to an attic room that wasn't wired in when constructed. Found the instruction good and everything worked first time as it should. Yet to see how long the transmitter battery lasts but again instruction for this seem easy. Thanks

On the whole very pleased with my purchase. The switches look good and modern. You push them in to send a signal to the receiver. They don't toggle up and down like a normal light switch. The instructions aren't too clear, but it was very simple and intuitive to connect it. I live in the UK and fortunately my electrics were compatible where I needed to wire it in. This would not work in a switch with only a switch live - it needs both a live and neutral into the existing switch and back out. I can confirm you can wall mount these into a standard UK back box and managed to fit the receiver behind. To screw it into an existing back box you need to pop the switch part off the front - I did this by putting my screwdriver in through the screw holes from the back. When putting the face plate back on, it did get stuck in though - other reviews say this can happen if you have fixed the back part too tightly to the backbox. I eventually managed to sort it but was a bit tricky to get the plate off. It would be the same if the battery needed changing too in the light switch.

Once fitted, this little gadget is brilliant. I could never turn my downstairs light on and off from upstairs, and now I can. No more stumbling down dark stairs! Things to know: If you want to control a ceiling light, the little receiver needs to go in or near the ceiling rose of the light in question. Standard UK ceiling roses don’t have much room in them so you may need to mount it next to the rose, or dig out some plaster under the rose to fit it in. Unless you know exactly what you’re doing, get an electrician to fit it for you - it needs to be fitted into your lighting wiring in the rose, to take power, and to control the light. It took my electrician 10 minutes to do - he knew what he was doing - I didn’t. Pairing the switch with the light was very simple - just hold some buttons down as per the instructions. The switches themselves come with screws and sticky pads so you can try out different places for your switches before you permanently attach them somewhere. Worth the money in my humble opinion. Way easier than trying to lay wiring through the house.

The instructions are straight forward although it does not take into account UK wiring. The instructions show the that the unit switches Live and Neutral. This is awkward to achieve with UK wiring as we only switch the Live wire. After checking Youtube videos I found that the wireless receive unit requires live and neutral to operate you can just use the live output for the lighting. Works well even when hidden in the ceiling. It works really fast and am very happy with the switch kit.

Excellent two-switch kit. The switches were easy to pair with the receiver and the receiver is of a size that easily fits into a mounting box. Everything works well when installed. A good piece of kit at a good price. Highly recommended.

For the price, I wasn't expecting these to be that amazing - but they are! The manufacturing quality is great, the switches have a nice feel and most of all, they work perfectly. I've not tested the range as my two switches only need to be a few m from the relay. The only (minor) negative is it's supplied with Sprung connector blocks which just don't grip the wires tightly. Replace these with a couple of screw terminal blocks and you've got a first class product.

The product worked exactly as I thought it would. Connect permanent power in and the light(s) you want to drive to the out. The switches on my set were not bound to the supplied receiver, but a quick glance at the instructions enabled me to bind them both in about 20 seconds total. Excellent product so far.

A l'attente de se que je voulais , fonctionnel

Leichte Montage

Bon fonctionnement, le bloc de connexion n'est pas trop gros et rentre dans un boitier d'encastrement si l'on veut éviter de passer par le plafond (pour un plafonnier). Prévoir un tournevis fin pour enlever la façade, c'est en effet un peu dur avec un risque d'abîmer le plastique si l'on force trop.

Perfekt in Funktion und einfach in der Installation. Kann ich empfehlen

merci