Lepro 12V LED Strip Light 5M (No Plug), 3000K Warm White, 2300LM, Stick on

I recently purchased an LED strip for my home, and I'm thoroughly impressed with its performance. The brightness and color options are outstanding, allowing me to set the perfect mood and ambiance in any room. The adhesive on the back makes installation a breeze, and the remote control provides convenient operation. Additionally, the energy efficiency of LED technology means I can enjoy the stunning lighting effects without worrying about a spike in my electricity bill. This LED strip has truly transformed the atmosphere in my home, and I couldn't be happier with the purchase.

Very happy. Used them to add some accent lights to my kitchen. I didn't use the power connectors provided as I already had a 12v supply wired up to a wall switch. The glue on the back is pretty decent as long as the surface is clean. The colour temperature is quite nice, and I imagine it will be even better at night. Difficult to comment on the quality as I've only just installed them, but they were easy to fit. Hopefully they will last a few years at least. Now I just need to hide the cables.

Loved this product, it ticked all the boxes for me. The brightness and tone of the light was exactly what I needed. However, they do not come with a power supply which is unfortunate but not a big deal given the price. A simple 12V supply along with the lights and you're good too go! I would definitely recommend these LED strips for background lighting or under a bed/couch for a lovely ambient effect. I personally have mine adhered to the underside of my desk which adds a nice light and makes working in the dark a little less strenuous on the eyes. Would definitely recommend!

Good lights

This is a great lighting system for under my kitchen cabinets, gives out a great clear white light and very easy to install. i also bought some clips to hold the lights in place, but the adhesive backing seems to be holding fine on its own. The lighting strip can also be cut into sections and you can solder additional wires onto the cut section - i cut mine into a 3m and a 2m length - you may need two controllers, but might be able to get away with just one depending on how far apart the lighting strips are if you attach longer cables to the lighting strip. I added over 3m of cable to the lighting strip with no adverse effect on the light intensity or delay on the lighting strips operating I would definitely buy again and highly recommend this product.

I bought 5m of these LEDs in Nov 2018, so I could install some under-cabinet lighting in the galley on our boat. I wired them directly into a new 12v circuit, and many people told me that they wouldn't last. The reason they gave me was that most 12v systems, fluctuate in terms of voltage. So when the engine is running, the alternator is charging the batteries, which pushes the voltage up as high as 14v, and they told me this would burn out the LEDS. Well I can say with some confidence, that this is utter rubbish. With 6 years of living on a boat, using these lights every single day, charging the batteries and therefore, pushing the voltage up to well over 14v at times, these LEDs are still perfect. I would highly recommend them.

I have bought several reels of these strips for various purposes. The pictures show a strip of these in an 80s sideboard, in these pictures they are running at 20% brightness using a driver matched to the number of LEDs installed in this particular unit (to dim them, the driver must match within around 30%). They stick well to varnished surfaces like these but not so well to raw surfaces like wood or cardboard. The third picture shows a group of 3 (they can be cut off in groups of 3) inside a children's construction project and as can be seen, they have come unstuck. The final two pictures show these lights installed in an inset model of the Grand Canyon within a little side table. The batteries for this number of bulbs have lasted 2 years with intermittent use.

terrible i’ve brought 2 of these on the past 4 months and they have both broke i got these on the 24th of january are they have broke already

Lyser som den ska

product ok geeft wel een sterke geur af

I am very pleased with this product, it was exactly what I hoped it would be. I have been creating a "library" wall by combining 6 bookcases & shelves across a 18foot wall. Since the ceilings are so high I decided I would prop some of my paintings above the cases & that they needed lighting. After researching the least expensive diy options these led strip lights seemed just the thing: within my limited budget & not requiring alot of technical skill to install. A guick search of youtube, a simple video later & I had all the info I needed. Because I am concerned about dust, but the led tracks were to expensive with that long of wall I had to find another option. My local hardware store had protective tubes for florescent bulbs 8feet long($5). I taped the led strip to a 1/2"pvc moulding($2.53), slide the moulding into the tube & taped the ends to seal out dust. I now have two 8 feet Long led light tubes that I can vacumn off without having to worry about messing up a contact or knocking the tape off. I had installed a 1 1/2 inch moulding board across all the cases to make them look more built in & the tube sits nicely right behind it. You cant see it from the front at all, but it illuminates the paintings well. These lights Do Not come with a power cable so be sure to get one. I also added a dimmer switch to mine, which I really like. The lights are a warm yellow & put out an amazing amount of light for being so little. I have no ceiling lights & these totally transform the room. They can be cut to any length you need & are well marked. I look forward to installing them in my display cases next.

I installed these recently in my kitchen. They powered by a 15A/120V lighting circuit wired to a switch. I also purchased a 2A 24W LED driver/transformer from Amazon which is mounted under my upper cabinets as well. Very straight forward installation, they don’t get very hot, and the 3M tape on the back is enough to hold the strip on. I purchased the clasp style connectors from Amazon as well. The connectors work pretty good but soldering would be better.

Harika ürün, beklediğim gibi geldi. Hemen taktım ve kullanmaya başladım. Teşekkürler...