6" Overall Length Satin Nickel Kitchen Cabinet Dresser Drawer Handle Pull Hardware, 128mm (5") Hole Centers, 03SN128, 25 Pack

The media could not be loaded.  I have ordered two cabinet pulls and one box came with manufacturer name and seal but the other one was damaged and each individual product is also not sealed. Returning one of them and ordered again. Will update once I receive the third box.

I rarely take time to write a review but this is a deal! A very similar handle at Home Depot is $4.98 for just one piece!!! The quality is good. If you are looking for a more substantial handle this may not be for you. These are more thin and slick by design. They provided an updated look to our older kitchen cabinets. When installing, you may need to use a washer for the screw hole is a bit short ( maybe due to the style of the handle). Our kitchen now has an updated look for under $30 and minimal effort.

Handle quality is good, but only ships with 1" (25mm) M4 screws. Annoying that they are metric. If you need longer screws, it may be difficult to near impossible to find longer truss head M4 screws. Regular pan head M4 screws tend to dig into the wood when tightened needing a washer. Not a big deal, but annoying that they don't supply longer wide head screws as well. Other handle manufacturers usually supply medium and longer screws to allow for the two common drawer and cabinet face thicknesses. It is easy to cut the longer screw (using pliers screw cutter), but if they are to short you are screwed (sorry for the pun). M4 screw can be purchased from McMaster.com (http://www.mcmaster.com/#machine-screws/=x4g0lz), choose your length.

They look good and the price was great. The holes are a little rough as well as the ends so not the highest quality. I still recommend them as long as you're not looking for really high end finishes.

Matched my house’s original kichen handles.No scrarches or tarnish.I wish i could have bought just 6 of them, but price was reasonable enough.

Beautiful design. Doesn't catch on clothing as you pass drawers. Low profile but not too narrow for easy grabbing. Screws included were too long - had to go buy 50 screws of the correct length for Ikea cabinet drawer & door fronts.

The quality on some of the handles was poor. Luckily I had extras and could pick the better ones to use.

The handles look as nice as we expected and match our stainless steel appliances and fixtures. They taper nicely in the middle. I did have to buy a different, smaller set of handles for our narrow drawers, because these didn't fit will inside the inserts on our 12" shaker-style drawers. Otherwise, they're perfect.

but the thread is too shallow in the screw holes. about 1/8 thread depth. the screws are 1 inch long. So we can't tight the pulls on the 3/4 inch thick door panels.we have to put a washer at behind the doors.