Cable Blanket

I’m a teacher in a classroom where I wanted a layout that meant I needed to be able to safely walk over a power strip cord, AV cable, and two Ethernet cables. Not many cable protectors can hold that much, and if they do they are REALLY bulky. I’m a klutz, and I knew if I had a speedbump like that to go over I would be tripping CONSTANTLY. I was delighted to find this, although (remember: teacher!) I was put off by the price, since you can’t really reuse this year to year (we have to clear out rooms so they can do deep cleaning each summer) because it is adhesive. So to save money I decided that 2.5 feet would be just enough (you can see I could have used another 6 inches or so in my pic above!) so I cut the roll in half. I’ve now used that roll up over the past 2 years, and I ordered the double pack which will last me 4 more...this thing is great! The adhesive was surprisingly durable, despite frequent traffic, and occasional roll-overs with my desk chair. It didn’t damage the short, institutional school carpet either time, and it let me really squish down those cables really, really flat. This is a great product!!

It blends in with my deck and hides the cable. The attached sticky product did not work and I had to apply a different double side tape.

Great for running speaker wire across doorways and vinyl floors. Looks nice and reduces tripping hazards in our apartment. Adhesive doesn't always hold, but can be refreshed with judicious cleaning.

This does a good job of covering the cable I put it on, and its color is close enough to that of the hardwood floor not to be too much of an eyesore. But the adhesive is worthless. It stuck for a few months, but ever since then, it has spontaneously peeled itself off the floor, allowing the cable to slide out from under the cover. It seems that it never fully "recovered" from being coiled up for shipment, so there's a constant bending pressure that just pops the adhesive off the floor over time. We have this covering an audio cable that's running across the floor, under an area rug, so I cut it into two pieces, one for each side of the rug. It was easy to cut at the angle I needed, and it was easy to place on the floor Since we're just protecting a single stereo audio cable, the protection it offers *would* be adequate if it would stay stuck to the floor, so that the cable didn't come out from under it.

I was an unwitting middle man between the seller and landfill. There are several things wrong with this product. 1) There is barely room for two cables. I have a 220v and 115v cable that need to be covered. However, the profile of these two cables barely fit in the cavity designed for the cables. 2) The tape backing on the adhesive was inconsistently covering the adhesive. Looks like it was displaced when the cover was rolled up before being boxed. 3) The adhesive was inadequate to the task. I cleaned the surface of dust and debris before trying to lay down the cover, but the adhesive did not adhere to the material of the floor. The floor in my shop is similar to brick in composition but seamless as it must have been poured and then smoothed out. Probably not the best material to glue to, but it did not stick at all. Anyway, don’t buy if you have multiple cables of above average size or a bare concrete or brick-like floor.

Works exactly as it should. I had some wires that I needed to secure so it wouldn’t be a trip hazard for me. I couldn’t decide between grey or brown, but I went with grey. Our flooring in the office has both shades of color in it, but I feel like the grey was a good choice. It’s been about 2 months since I installed it, and the adhesive that it comes with has worked just fine. No complaints here.

Worked well on low nap business carpet.

In theory, this is a nice idea (hence, the 2nd star) - to have a cable cover with potential for variable height to cover a variety of cord thicknesses and numbers. The problem is that the execution is terrible. The adhesive is inadequate to hold to the floor, and within minutes, it comes up and looks worse than nothing at all. Believe me, I cleaned and dried my floor several times before trying to apply this,s and it was pristine, but the poor quality adhesive made it impossible. It is not inexpensive either, so I recommend trying something, anything, other than this item. Very frustrating.

meet my requirements - I wish its adhesive was stickier.

Lo use en piso Vinilico y me sirvió perfectamente

I used this to cover the cable from our double recliner sofa, across a laminate floor. It worked perfectly and it's now been down 4 weeks and is still stuck fast. The trick is to ensure you clean the surface before sticking it down.

This cable cover is great! It covers my tv cable, lies flat and was easy to apply to my floor. My cable cord lies flush to the floor with no chance of anyone tripping on it. Such a useful idea, excellent quality and durable. I wish it came in more colours. The product was delivered quickly and in excellent condition.

I'm very impressed by the quality of the product, it stretches very low to the floor. I wouldn't put more than 3 cables under it, I only used one and works great! I expected 3M adhesive, but it seems to be an off-brand adhesive instead. Unsure how well it'll come off the floor, but so far it's very asthetically pleasing.