WaterBrickInternational Water Spigot Attachment for WaterBrick Water Storage Dispenser | Gravity-Fed Ventless Spigot for Beverage Dispenser | 3/4 inch Inlet | Food-Grade LDPE Material

I do like this product and it works well enough but would have given it 5 stars if it worked just a little better. my gripes are 1) low volume pour out. but then this can be good too if you are camping and trying to conserve water, so id say this is just a 1/2 star negative. it has sort of a vague on off position, you turn it and it starts letting a little water out ,keep turning it and less comes out. think its because the spout is self venting. it is what it is , not terrible but worth mentioning. 2)you can only use about half of the water in a waterbrick with this. this is just because of the way the water brick is designed, the spout mounts mid way up so everything below it you have to tip the brick to get to it. This has also been ok for me though. I use half a brick then switch to another. I use all my half empty bricks to dump on the camp fire or for other large volume needs. its not ideal but it still works, id love to see them make a pressure pump type system for these where you actually use the brick on end with a pump that dipps in down to the bottom . pressurize the brick and get all the water and at higher volumes if you want it. still worth getting if you want to use water directly from the bricks like I do.

I've been using this thing for a couple of years. And here's my take. This thing is prone to leaking at the tank threads. It usually has to be fiddled with to stop the leak. I've never just put it on and have it just work first try. The company's website says to rub the gasket with a little vegetable oil. Sometimes that just won't work either. Also the handle won't work with the spigot installed. The spigot stands out too far, and interferes with the handle. And the way the handle is designed. It can't be removed when that spigot is in place.

I was pleasantly surprised by how well built it is, matches the solid build of the Water Brick itself.Even if other reviewers are right; the water flow slows, the handle cannot be used while the spigot is attached, etc. I consider these to be design flaws in the water brick more than flaws of the spigot. If the handle were designed differently, or if there were a vent hole in the brick, these would not be issues.

Great nozzle for accessing water bottles. A must have for the bottles you store your water. Should come in packs of two and have a rubber attachment connector so you don’t lose or forget them.

The first one I bought leaked as soon as I turned the Waterbrick on its side. I bought a second one, because there's not really another option for the Waterbrick, and I'm much happier with the second one, which did not leak. I also paid less for the 2nd one, though both seem overpriced for what they are.

Leaked no matter how I adjusted the spicket or tightened it, I finally took it off and carry it around with me if I need to use it.

This is a replacement for one my husband broke for our water bricks that we use for drinking water in out camper.

Needs an air release/intake somewhere. The water coming out slows to a trickle pretty quickly, requiring you to constantly tilt the water brick up & down to relieve the valve so the water will come out again.