Herculiner Aerosol Spray Truck Bed Liner, 15 Ounce Spray Can, Black, Textured, Suitable For All Truck Beds, 6-7 sq ft Coverage

I preceded use of this product by trying the rustoleum brand spraycan bedliner, suffice to say the product quality and performance was beyond awful.That experience was a complete was a complete disaster, so I had a good comparison point. To begin this product was fresh in the rattle can and mixed relatively easily. The product appears to be under a higher pressure than regular spray paint, so nozzle effort and strength of the spray streak are noticeably higher. These leads to my first observation that due to the higher pressure, and the relative close focused spray pattern, it takes a bit of effort not to deposit too much material, which can lead to a run, and it also makes getting a uniform appearnnce as to the gloss of the final finish. The product would be better served with a nozzle that produced something similar to the fan pattern of a spray guy. That would facilitate getting more even coverage, especially on the final coat. I was coating a part for appearance, so this was more important to me. I managed to get an acceptable result but it was a little too touch and go for my taste. Obviously the spay gun applied method would solve these 2 problems, but I just had a dashboard to cover. The texture is prominent and even, and the finish is much closer to gloss than flat, a true semi-gloss, or semi-matte finish would be nice as an option. The product dries quickly and looks very good with the above caveats. Certainly it was like night and day as regards comparison to the Rustoleum product; this Herculiner allowed me to realize what I had envisioned for the restoration of an old series 3 Land Rover dash pad. I would recommend this product

Excellent coverage. Used to recoat bed. Came out perfect.

This did an absolute amazing job at touching up and restoring my existing truck bed liner which was starting to fade and had some stains in it. This added a beautiful layer that just looks absolutely gorgeous. It's important to keep in mind that this does not add any texture and is basically a 10 too spray paint.

First off, you ain't getting bedliner in a can, nope, tech is not there yet, maybe someday. But, for a bedliner type finish for things like bumpers, back racks, whatever, this stuff is great. Finish is very consistent and cures by moisture in the air, which is great because I always seem to get painting done at end of day when the evening moisture starts, it won't ruin the finish of this and actually promotes curing. Stuff is the easiest paint to apply, lays on thick even if your not trying, so don't go too heavy. I do have to keep touching up the finish here and there for the first week or so as I think it takes about a week to really fully cure. I will paint something with it and give it 2 days to cure before I handle it, and even then be gentle. I painted my headache rack which was aluminum with a factory powder coat finish. I scuffed it with SEM scrub prep stuff and red 3M scotch Brite. This herculiner adhered amazingly, the rack was sitting on my tailgate the other night when a wind storm came in, blew it off the tailgate, it fell and slid on the driveway with only a couple scratches that got down to the old powder coat under it, I was quite surprised it held up that well. Hit just those spots once and it looks perfect again. So yeah, not for a bedliner, but the best for everything else. I hope they start making more colors.

This stuff was super easy to apply with no runs or drips and the finish was absolutely what I wanted. I used it for the steps on our outdated suburban that were extremely weathered and made them nice and black and actually added some grip to them. This can save me so much money and replacing them and they look brand new. I ended up buying a second just to have on hand for a future product. I would highly recommend this product.

It's worth the money if your doing small projects. The can will clog but its an easy fix to just clear out the nozzle and turn it a few times. I use it on subwoofer boxes and my running board on my truck. Dries quickly and make sure the area has ventilation from the odor. Once completely dry you can feel the gritty texture. You will need several cans due to how much spray comes out. I have purchased this product several times.

I bought this to help put a stop to rust spreading on a golf cart. Brushed off the rust with a wire brush, then treated with rust-oleum, then finished with this bed liner spray. Once fully dry the coating is very durable, the color is a deep rich black, and it makes everything look brand new. The only photo I have isn’t the best for how I used it but I wanted to clean up the battery bay when we changed out our batteries. I grabbed a can of this I had used several days before and everything sprayed out like it was brand new. All in all great performance. It takes about 24 hours for the smell to finish airing out. Just be sure to keep the air circulating if you’re in a garage (like I was) or use this stuff in open air. Very easy to install but be careful about what’s behind what you’re spraying because once it’s on and dry it’s not cleaning up

I was really disappointed with this product. Out of five cans, three wouldn’t spray at all. I even tried switching out the nozzles, but they clearly lacked enough internal pressure to work. The two that did spray clogged almost instantly, within minutes of use, even after shaking thoroughly and spraying upright as directed. The product itself might have decent texture and coverage (claimed 6–7 sq ft), but it's worthless if it won’t come out of the can. I couldn't return the faulty cans either, which makes this a costly mistake I won’t repeat. This was meant for a light truck bed touch-up job, and now I’m left with unfinished work and wasted money. I can’t recommend this product based on my experience. Q&A Section: Q: How is the coverage if the can actually works? A: Each can is supposed to cover 6–7 square feet, but I couldn’t verify that fully. The two that did spray gave decent texture, but clogging made it impossible to apply consistently. Q: Did you follow the prep instructions (cleaning, shaking, spraying upright)? A: Yes, I thoroughly cleaned the surface and followed all prep instructions. Still had major spray and clogging issues. Q: Can you return defective cans to the manufacturer? A: No, they do not accept returns, which is part of why I won’t buy this again. Q: Would this be good for smaller jobs like fender liners or bumpers? A: Only if you’re willing to risk some cans not working at all. I wouldn’t trust it for anything critical.

Put this on my new holiday trailer as the paint the manufacturers use may as well be water, they are super cheap. So I lightly sanded the entire front of my trailer, taped everything off and used this [no primer needed], and the results are excellent. This is pretty tough stuff and with proper prep work, will last far longer than the super cheap paint used by the OEM's. I did have a bit of sputtering from the nozzle half way through the project but I stopped right away, cleaned the nozzle and reshook the can with no issues afterwards, coulda just been some gunk. No other issues, no runs, etc. I let it bake in the sun when I was done but that has no bearing on the product. I kinda wish it came in a larger aerosol can but the product inside is excellent.

Absolutely worthless bought two cans and they were both defected I wouldn’t recommend it tbh

Good quality as described

Depuis des années. j'ai voulu arrêter le développement de la rouille sur mes ailes arrières; malgré l'usage de produits recommandés, kit professionnel, etc.... Et ce, avec toutes les précautions recommandées !.... J'ai commencé à traiter tôt, de petits défauts, peu apparents, au début !!!.... À chaque hiver, la rouille s'incrustait sous les réparations de l'année précédente... Aucune produit professionnel n'a fait le travail de façon durable !!!.... L'eau réussissait à briser les couches de protections; pâte..., peinture... Je cherchais une protection durable et l'uréthane est un élément de référence pour sceller la carrosserie !!!..... Ce produit est extrêmement adhérent et procure une étanchéité à toutes épreuves !!!..... Bien sabler et nettoyer avec l'acétone !!!.... 2 couches !!!..... Application facile !!!..... (Photos) Fortement recommandé !....

I tried the Hercules bed liner spray, and while it’s decent, it’s not thick enough for a proper bed liner unless you buy at least half a dozen cans and apply 3-4 coats. It’s more suited for smaller projects. I ended up using it on my truck’s wheel wells and it worked well for that. Just keep in mind it’s better for touch-ups or smaller areas, not heavy-duty applications.