# PVC Ceiling Tiles

These Art3d PVC Ceiling Tiles completely transformed my space! The 2'x2' panels are lightweight, easy to cut, and simple to install. The white finish looks clean and elegant, and the material is durable and easy to wipe down. I used them to create a statement wall in my bedroom of a new build home, and the difference is amazing. Great quality and value for a 12-pack — highly recommend!

Beautiful in person!!!!!! I recommend having sharp scissors in order to cut. I used an oscillating tool, scissors and razor blade to get mine cut to size. They are plastic but very durable. It was tough at first on trimming them due to the 3D effect and some ceiling tiles not being full regular sizes. Please keep in mind the tiles you will need to cut! Other than that’s, they were bright. Easy to install, and light weight although the box is heavy. Good luck to you on your project! These worked for me!

We replaced our entire basement ceiling and ordered 7 packages containing 12 tiles. We used the existing grids. The product looks far more expensive than it cost and only 2 pieces were cracked in the entire shipment of 84. Installation was ok and went fairly fast (lots of trimming, but the product is lightweight so scissors can be used), The finishing work takes much longer. We needed to reinforce the tiles that were behind the larger lights and heating ducts for support because the product is so lightweight and flimsy. And there were many unsightly gaps created where the tiles meet the walls stairway, windows, detectors, etc. Again the lightness of the product means they don't always lie flat. Overall we don't regret the choice because the cost was low and final look is beautiful. Plus they are water and mold resistant.

Titles look great in our newly upgraded bathroom.

Easy to work with easy to cut little tricky to make the cuts for the perimeter but other than that, they’re a great tile

This is a horrible product. I bought 31 cases for a ceiling job. Every box was damaged except two. The corners are cracked. I then called Art3d and left a message. I received a return call at 2 or 3 in the morning. The person left a message stating that Amazon was responsible. The next morning after 4 chat rooms I finally got someone on the phone from Amazon. The Amazon representative says they could pick up the damaged boxes, but there wasn’t an option to bring new ones. Needless to say, the job was not completed. Do not buy. Neither Amazon nor Art3d will be helpful if there is product damage.

I used this on a wall, instead of Bead Board. It's Beautiful looking, but hard to cut & glue. Pros: * Looks gorgeous. * Light weight means easy to move around. * Covers a ton of wall space quick & easy. * I painted over the edges only, & the color match to my bathroom white woodwork paint was perfect. * Hides a TON of flaws, if your walls aren't perfect. (Sand down the bumps first, though). * Flexible for easier positioning in hard to fit areas. * Scratch resistant. Despite trying to cut it with a Razo knife, it skidded right off, & no marks showed after. * Nothing sticks to it. I calked around it, getting some calk, & later paint on it. Both just scraped right off once dry. * Super washable. PVC is unlikely to hold anything on it, & a quick wipe should get rid of any dirt or spills. Cons: * Very hard to cut. Exacto Knife skidded right off it. Household shears were unmanageable. I had to go to Tin Snips, which cut through easily, but only 1 inch at a snip, & it left a bumpy & ragged edge. * Those Sharp, Ragged edges are a cutting / snagging issue for hands & clothing, & look awful. * It's hollow, so if you end on a half panel, you're gonna have to deal with big holes at the ends of the ridges. (I filled mine with calk, then painted, but it's not a great looking finish.) * Very hard to secure to a wall with calking/glue. It holds it in place - if you have a baseboard to tuck it into, but without the boards at the top & bottom like I used, I doubt it would still be on the wall. When I push on it, I can hear the calk moving behind it. (Also, the calk/glue just rolled off it with my finger, when I was doing cleanup, so it's not really stuck on the PVC - front or back.) * I think you might be able to tack it down with brad nails, but I doubt you'd like the look of it. I wasn't willing to risk it, once I realized the paint just rolled off with my finger in cleanup. I suspect it would leave divots, too, so I would not plan on using nails, unless you intend to cover them with wood to hide them. * Manufacturer says they can be painted, or glued, but neglect to mention what Glue or Paint will stick to it. My experience with it says glue and Paint Do not stick to it. Both just rolled right off with my fingers in cleanup - After drying. Will the paint stick, sure. Will it stay there if you bump it - I highly doubt it. Tips: * Use a baseboard & top rail, to hold them onto the wall, & calk/glue just to seal it to the wall. * Use a plastic putty knife to clean excess calk or paint off edges. (Or a Credit card, too.) * Someone else suggested using a hair dryer to soften it, & THAT was a Great Tip! It not only made it softer to cut, but also aided in smoothing out some of the ragged & bumpy edges from cuts. I used a metal Putty knife to smooth it, while using the hair dryer to soften it. Not a perfect edge, but way better than the mess I started with. Overall: This was a good solution to my small bathroom's wall imperfections, & I'm happy to have found it. That said, it was a pain to install, & I would not use it on a high traffic area wall, unless I had boards going all around it on all 4 sides. There's no running or roughhousing going on in my tiny bathroom, so no danger of people bumping it.

Bought the ceiling tiles for my wood shop because there easy to clean the saw and sanding dust off. I have had them installed for over 8 years and purchased the pack of 12 for spares. I have never had to replace any but accidents happen. Very good product, highly recommend them.

Pedí 3 paquetes y todos vienen rotos.

L'effetto è soddisfacente, ma le piastrelle sono troppo sottili, il montaggio non è facilissimo. alcune non combaciano perfettamente, ho dovuto rifinirle con bordi in legno e altri accessori per abbellirle e coprire i difetti di fabbricazione

Super très beau

Nice tiles when there stuck on ceiling,there were a few problems with the sticking down the edges,used panel pins,and would have been nice if there was instructions in the box,the workman used super glue on stubborn corner that wouldn't stick,I give a 5 star rating as very nice tiles.

Gute Verarbeitung, einfache Montage und sehr gute Optik. Empfehlung. Guter Verkäufer.