Metra99-7862 Lower Dash Single DIN Installation Kit for 2003-2007 Honda Accord with Wire Harness,BLACK, 8.70in. x 8.00in. x 4.50in.

Good fitment, came with bracket to hold the head unit as well. Be slow and careful with install so you don’t scratch your plastics.

Installed on my 2003 accord coupe with navigation. This was an easy install. I did not buy the panel removal tools, just a flathead screwdriver with no damage to the panels. I did get the antenna extension, which was handy. Installed this with the Pioneer X8500BH and fit perfectly. The plastic matched my interior dash. It was sturdy once installed. Just watch a video on Youtube how to remove the dash to get to the stereo. I removed the vent panel with no problem. Great product and looks great. I love having the new stereo in my car with bluetooth, usb, and HD radio. Now I can slowly build my audio system from this.

As advertised, thanks! Was a pretty easy installation. The blue plug coming out of the stock radio is a little difficult to unplug, but there is a small latch at the top of the plug you have to push down towards the ground before it comes out.I used small crimp tubes like these for the wiring:[...] - I bought 2 packs of 10 and had a few left over. I didn't wire together the solid orange/orange-white and the solid blue / blue-white because they didn't match but there was no effect on the performance of the radio or other car electronics as far as I can tell.The spare antenna cable did come in handy. for my radio. But the installation of this kit is pretty easy. I used the video here as a guide. [...]Like the guy says in this video you can install this unit and radio without pulling off the dash panel that holds the stock radio and air vents. you only need to pull out the stock cubby hole and you can do everything in there.I just keep the stock radio turned off and have it display the clock.

The previous owner of my 03 Accord had an aftermarket headunit with this same kit installed however the clips that lock into the car dash were damaged and the corners were slightly sunken in. I decided to drop $20 to replace it so that it was 'right' and not loose.The kit looks pretty good overall. The lower pocket is convenient for storing junk that doesn't fit elsewhere, and the headunit sits nicely within. My only complaint, and this may be because I have it installed slightly wrong, is that the trim piece that comes with the kit doesn't sit flush with the headunit. Instead, it is loose and usually rests pushed inward so their is a slight gap. It's nothing major and it still looks good, but it's not 100% in my book. I did not use the two mounting pieces nor the harness, but I presume that the harness that was previously installed is the one from this kit and it works fine with a dual zone climate system. For the price, this is honestly a pretty good deal. Wiring harnesses are usually around $6-10 and then to get the dash kit for another $10-14 is great.

Fits very well with 7th generation Honda Accord and no issues. Has upper clips that fit the where the original storage bin clips into and gives it stability. Screw holes line up well and hold securely. I find that with Kenwood headunits that the trim panel that comes with the Kenwood fits better than the one supplied with this kit. The wiring harness matches colors of a Kenwood harness for easy installation; some wires may need be needed depending on the headunit so just insulate them. Supplied harness fits flawlessly. I prefer to clip the headunit din to the mounting kit first then install it in the car and then connect the headunit to the harness and slide it in last. Can easily remove with keys from the headunit if adding RCAs in the future etc. Matches well with interior trim.

It worked

used to fix a customers car .with bad factory cd/climate control radio!

Cheaper than all the other kits, Fit is 9/10. Looks like it should have been made that way from the factory. You get to keep the factory radio so you can just uninstall and resale your vehicle as stock. Install will take about 30 min. Step by step instructions included. They are kinda vague but pictures are included. When you arent sure what to do just tug on the panels. When you are prying and you are scared of breaking it, dont be, just pry harder. I could have saved alot of time if I were more confident the panels wouldnt break. They are sturdy. A screwdriver is almost too thick. Maybe bite it and spend 5$ on a panel remover tool. CD Player isnt moving while driving. The under storage is slippery. You could put somehting in there that would minimize that or dont put stuff in there that you dont want to slide around. Also small thing that go to the back of it are kinda hard to get out if you have big hands like me.

Fits great...finish matched interior.Wiring harness worked flawlessly.Easy instal!!

Excelente producto.

Great product at a reasonable price. Didn't take too long to arrive from America to Scotland. Maybe a week and a bit if I remember correctly. Fits into the bottom slot nicely.Don't worry if you're not good with electronics, the wiring is easy peasy. Just connect each colour to the same colour on the other end. Black to black, red to red, white to white and so on. I soldered them, but you can buy clips that connect them if you'd rather do it that way. There are plenty of YouTube videos that explain how to fit it. Life saver. Retains all of the heater/AC functions and your old radio basically becomes a glorified clock. There are units that completely replace the old radio, but they're hundreds of pounds. Not worth it really. Bottom compartment is big enough for a phone or a few pairs or glasses/shades.

This kit is definitely worth it! The harness works great as well! The finish matches the car perfectly.

Excelente trae todo lo necesario para su instalacion y es muy fácil de realizar la misma