Max Professional 2145 Rubber Rejuvenator - 10 oz.,Black and Silver

It works - saved my printer. Apparently, printers are subject to dirty and/or dried out rollers which causes the printer to jam. In my case the printer - a Brother MFC 7340 - became totally unusable. Paper which previously jammed sometimes was not jamming every time - could no longer print out anything. I was not thrilled at the prospect of scrapping an otherwise good machine and shelling out for a new one. Probably a whole lot of this problem was my fault in the first place for continually using the back side of paper after I no longer needed what was on the front side. I read the reviews and instructions and thought, what the heck....I'll give it a try. It comes with a long red nozzle to allow you to pin point the product deep into the machine and directly on the rollers. I removed the drum and toner cartridge so as to expose the rollers in the front of the machine. They were literally black and covered with ink. I squirted some of the product - using the nozzle - directly on the roller, let it sit for a few seconds to soak in, then wiped the roller with a 2x2 cotton square - all the black ink came off. The roller was bright white underneath. Next, I manually rolled it forward, exposing the next portion of the roller and repeated the process until the entire roller was cleaned. You can only access one small area if the roller at a time so it takes several steps to clean the entire roller. You have to keep pushing the roller forward exposing each section until you have cleaned the entire roller. I then repeated it on the other side, replaced the cartridge and plugged the machine back in. It is very important that you unplug the machine before doing this cleaning - the fluid is flammable and, worse, you don't want to get a shock or cause an spark to arc while working on the machine. I then tried to print and it worked perfectly! Well worth the small price to purchase this product in order to save the printer. This bottle just saved me the cost of a new printer. When you store your bottle of product, be sure to put two strong elastic bands to secure the red long nozzle which will easily otherwise get lost.

Update to previous review..The cover cap has been strengthened, at least on this past order. Great improvement on the cap. ThanksHello, as far as the chemical product, it is great. I just have problems with the packaging. The top lid appears to come off to easily and then the spray applicator breaks off. And you don't want to try to put the sprayer back on. The can will empty out and the chemical is strong smelling.Outside of that.. this stuff is great!!

Used on my printer rollers, which were not feeding paper correctly. Used a small amount of the product, allowed it to sit overnight and the next day it worked like new. Very satisfied with results, shipping was prompt. Wish a smaller size was available!

I sprayed the rubber wheel that had been misfeeding my Epson 1430 printer and it seems to have stopped the misfeeds and pulls the paper through better. Make sure you spray the whole wheel and turn it by hand to get it completely covered and let it dry a little before another print job.

I don't have any idea about the product of how well it works because shipping didn't include the plastic tube that fits in the nozzle to apply the product.......

I had a problem with my scanner taking more than one document through the feeder and jamming it. I tried cleaning the rubber rollers with alcohol and it worked only for a little bit.I bought this spray and soaked the rollers for about a minute or two then wiped off the excess. Now the scanner is running super smooth like it's brand new! After seeing it work so well, I went and cleaned up every rubber roller in our house lol.

This is a 'Honeymoon' review, but I just used this product for the first time and it appears to be straight up pocket aces! I have a Samsung ML-1710 that's been a workhorse of a printer for me for several years (around a decade now!). Over the past few months it would have issues picking up paper. I'd have to flip paper, change paper, push, pull, and ultimately trick the printer into grabbing the paper from the tray to print or manually feed it. Granted I don't print a lot (about 20-30 pages per month), but it's still frustrating when the printer doesn't cooperate. I tried cleaning the rubber parts with rubbing alcohol before I found out that the internet says that's ill advised, and in my case, fruitless.Enter this stuff. I pulled my paper tray, lifted the printer to see where all the rubber parts were that 'grab' the paper, hit the flap switch that senses the paper in the tray with my finger (on the ML-1710, it 's a little pie shaped plastic piece off center of middle that just kind dangles underneath over the paper supply until pushed up into the printer's torso), sprayed the rubber wheels with just a flash of spray each, gave them a gentle blowing-on to 'dry' off, waited a few minutes, and printed a dozen pages without incident! This 3 minute fix is WAY better than my 45 minutes I tried to get things back in working order a few weeks back.Right now I'm thrilled and feeling accomplished! I'll update this accordingly if the same problem returns in the near future, but for the moment, this stuff is 5 stars AWESOME! A very welcome, simple $8 fix to what Google shows in a common problem for us laser printer owners!

Used this to restore the dried out paper handling wheels in my inkjet printer. It now reliably feeds paper from the tray again. No jams, no missed sheets, no multiple sheets. Easy to apply with extended tube.