upHere 5V 3PIN Addressable RGB Graphics Card GPU Brace Support Video Card Sag Holder,Built-in 5V ARGB Strip,Adjustable Length and Height Support,G276ARGB

After assembling my first gaming rig in quite some time, I recognized the need for additional support for my NVIDIA GeForce RTX 4060 Ti with 16GB VRAM. Installed in the top reinforced PCIe slot of my MSI MPG Z590 Gaming Plus motherboard, the GPU deserved a reliable brace to ensure its longevity and stability. Enter the "upHere 5V 3PIN Addressable RGB Graphics Card GPU Brace". This adjustable bracket is a real stress reliever for any graphics card requiring a bit of extra support. The design allows for sliding adjustments in both the X and Y planes, making it versatile enough to fit a wide range of graphics card sizes and configurations. Installation was a breeze, despite the lack of explicit instructions. The intuitive design made it easy to install, including integrating it into my existing RGB setup within my case. I appreciated the thoughtful design that allowed for tension adjustment. By slightly tensing the bracket during installation, I ensured that it would counteract gravity over time, reducing the likelihood of stress on both the GPU and the motherboard's PCIe slot. One minor caveat to note is that the screws may share space with other components, potentially affecting the seating of covers in cases designed with specific tolerances. However, this is a small trade-off for the added security and peace of mind the brace provides. In conclusion, the upHere 5V 3PIN Addressable RGB Graphics Card GPU Brace is a robust and aesthetically pleasing solution for anyone looking to secure their high-end graphics card. Its adjustable design, ease of installation, and thoughtful tensioning feature make it an excellent addition to any gaming rig.

Was very easy to install and the RGB lighting looks good. Highly recommend.

Super easy install. Hardest part is keeping your slot covers in place. Looks great and feels nice and sturdy. Honestly overkill for my RTX5070 but it looks sweet.

I am not sure I received the same branded item that was sold to me. The box says UpHere on it but the actual bracket has some logo, no company name. It looks identical, but I have a feeling this bracket was sold to another company with their logo on it from the main manufacturer. No biggie, just feels a little sketchy like it's overstock from a company no longer around that UpHere grabbed up and is now selling under their Amazon store front. As far as the bracket goes: The good: - price is great for peace of mind on a heavy GPU - LED setup is easy and works well with RGB Fusion 2.0, no problems (LED is brighter than any other LEDs inside PC) - Sturdy enough for a MEDIUM weight GPU. (I have 2080ti and much more weight might be too much) - Good build quality (for price) - No broken or missing parts The bad: - limited weight for cards above 20 series GPUs (would not trust with a 4090 or 5090, etc...) - The riser the comes from the bracket that is holding the card does not stay very well unless you screw the screw very very tight, even then slightly more weight seems to push down on the riser - I had to adjust the bracket once installed by bending it slightly inwards to actually be under my GPU's edge properly (was easy to adjust/bend) And that is my review for this GPU bracket solid 4/5 stars and yes, I would recommend if you have a graphics card that is not very very heavy. My RTX 2080ti is a hybrid and has a waterblock on it adding to it's weight and I am not concerned about this bracket failing due to weight. If I purchased a newer and more powerful GPU I would likely not use this bracket for that, but maybe. I will update the review if anything else happens.

Bought this for my RTX 5060Ti. Easy to install. Works with MSI Mystic Light and Corsair iCue. No programs to install. Looks good and stops GPU sag. Would buy again.

Found out it doesn’t fit micro atx but I got a a full atx and and it works great I have huge fans on the bottom that normal gpu support bracket won’t fin and it works great the rgb sync well too good upgrade to support my massive video card

#1 thing to know - there are reviews on GPU supports like this stating that they sag. News flash, people - it's not the bracket. Its the garbage metal your case is made of! History lesson for anyone under 45: Computer cases used to be built like tanks. I mean it! I had a full tower case that I wouldn't have been afraid to put 500lbs on top of. I actually stood on it many times to change a light bulb or reach something. Now everything is made of cheap, low-grade stampeed steel. You can push the back of most cases in with the palm of your hand. They are JUNK. This is where your problem lies. This support affixes to the expansion slot bracket. I'll bet you if you push on the support, you'll see the back of your CASE bending. It's NOT the support. The bet is on. Loser has to take the first drink from the garden hose on a 90 degree day. Put the blame where it lies. This bracket - and almost all like it - are just fine. Now about the support: It does what it is supposed to. Fits nicely and the support arm is adjustable so it will fit between the fans of just about any GPU.

I bought this support to brace my 3-fan GPU in my King 95 Pro case, which has 3 fans integrated into the bottom of the case. It seemed like a good alternative to a post support. The good: simple design, nice RGB lighting with splitter cable, smaller screws than stock case screws to work with support bracket, 2 small foam pads to cushion the brace/GPU interface (see later). The less good: the brace sags vertically and sways laterally (this could be due to using only 2 of the 3 brace attachment screws, which were all that would fit my case/card combination). The two small foam pads shifted and came loose, and blew off the brace. I have found only one of them. I replaced them with a piece of electrical tape, which should be sufficient. In the end, I will keep the brace becasue I like the RGB and it is working well so far. However, I bought a post too. It fits between the bottom case fan and the motherboard - not ideal, but combined with the brace, I think it will be sufficient.

تركيبه صعب والمشكلة انه ضعيف ومع الوقت يرتخي مسمار التثبيت في على الكيس والي يشيل كرت الشاشة

I bought this GPU bracket hoping to properly support my RTX 5070 in my Lian Li Lancool II case. Unfortunately, the left side where it attaches to the case is too bulky, which forces me to mount it one row lower. Doing this makes the adjustable part too short to reach the GPU, so it doesn’t really serve its purpose. I had to drill extra holes in my case to make it fit. Also, I’ve lost access to the three PCI slots below the GPU. On the bright side, it’s colorful and has lights, so it looks nice. Overall, it’s functional if you’re willing to modify your case, but the design could be much better.

Ich habe mir die upHere ARGB-GPU-Halterung geholt, um das Durchhängen der Grafikkarte zu verhindern – und genau dafür ist sie top. Die Halterung macht einen stabilen, wertigen Eindruck, lässt sich gut in der Höhe einstellen und die Montage war bei mir unkompliziert. Optisch ist das ARGB ein schöner Bonus und wertet den Innenraum zusätzlich auf. Wichtig: Ich hatte sie zunächst mit einer KFA2 GeForce RTX 5080 EX Gamer 1-Click OC im Einsatz – hier hat alles perfekt gepasst. Danach musste ich die Karte wegen eines Defekts tauschen und bin auf eine Gigabyte GeForce RTX 5080 Gaming OC gewechselt. In meinem Gehäuse (ENDORFY ARX 700 ARGB) passt die Halterung damit leider nicht mehr, weil die Grafikkarte bei mir zu viel Platz an den Slots einnimmt. Das ist aus meiner Sicht kein „Fehler“ der Halterung, sondern eine Frage von GPU-/Gehäuse-Kombination und Platzverhältnissen. Deshalb trotzdem 5 Sterne – die Halterung erfüllt ihren Zweck sehr gut, man sollte nur vorher kurz prüfen, ob neben der GPU genug Raum vorhanden ist.

Cumple perfectamente con su función, manteniendo la tarjeta gráfica completamente horizontal, descargando el peso de la placa base, dado el peso y tamaño de esta tarjeta. Tiene suficientes efectos lumínicos para elegir. Como m placa base es MSi, este soporte funciona perfectamente con Mystic Light, trabajando conjuntamente con otros periféricos RGB de MSi. La parte del soporte que es ajustable y toca directamente la gráfica me ha venido justo, ya que subir mas este soporte, solo un punto mas, interfería con los ventiladores ya que quedaba pegado a la tarjeta. Me ha quedado bastante bien y estoy satisfecho con la compra. Lo recomiendo. Es vistoso, pero las imágenes no le hacen justicia.

Valutazione: ⭐⭐⭐⭐⭐ (5/5) Ho avuto il piacere di provare la Scheda di Supporto upHere per GPU con LED ARGB e sono rimasto colpito dalla sua capacità di migliorare l'estetica del mio sistema, fornendo allo stesso tempo un supporto affidabile e funzionale alle schede grafiche. Design Sorprendente: La Scheda di Supporto upHere aggiunge uno strato di stile al mio setup grazie ai LED ARGB integrati. Questi LED possono essere personalizzati per creare effetti di illuminazione unici, trasformando il tuo sistema in un'opera d'arte visiva. Stabilità e Supporto: Una delle funzioni principali di questa scheda di supporto è fornire una base solida per le schede grafiche pesanti. Grazie al suo design robusto e alla struttura in acciaio, questa scheda di supporto mantiene le schede grafiche in posizione sicura e stabile. Compatibilità Universale: La Scheda di Supporto upHere è progettata per essere compatibile con una vasta gamma di schede grafiche e cabinet. Che tu possieda una scheda grafica di fascia alta o media, questa scheda di supporto sarà in grado di soddisfare le tue esigenze. Installazione Semplice: L'installazione della scheda di supporto è semplice e rapida. Le istruzioni chiare e gli accessori inclusi semplificano il processo, permettendoti di aggiungere un tocco di stile al tuo setup senza problemi. Miglioramento dell'Estetica: La combinazione di design elegante e illuminazione LED ARGB può trasformare radicalmente l'aspetto del tuo sistema. La scheda di supporto upHere non solo fornisce supporto funzionale, ma aggiunge anche un elemento visivo accattivante. Dettagli di Qualità: La costruzione robusta e i dettagli di qualità dimostrano l'attenzione che upHere ha dedicato a questa scheda di supporto. Gli LED ARGB sono luminosi e ben controllati, garantendo una resa visiva impressionante. In conclusione, la Scheda di Supporto upHere per GPU con LED ARGB è un accessorio che combina stile e funzionalità. Con il suo design robusto, illuminazione personalizzabile e facilità d'installazione, questa scheda di supporto è una scelta ideale per chiunque cerchi di migliorare l'estetica e il supporto delle schede grafiche nel proprio setup. Che tu sia un appassionato di gaming o un creatore di contenuti, questa scheda di supporto aggiunge un tocco di personalità al tuo sistema.