LANSCOERY Acrylic Display Case for Collectibles, 3-Tier LED Light, Wood

Disappointingly, of the two units I purchased, one arrived with an acrylic panel that was cracked, as if something heavy had been dropped point first onto the box. Since the damaged piece was the back panel, however, I decided that it didn't matter, and assembled my units anyway. I bought two of the 15 inch long units, planning on stacking them on top of each other. After I assembled them, I realized that I could remove the bottom board from the top unit and make them into a single, two storied unit, which worked beautifully. I highly recommend doing this if you plan on using more than one unit together. It's classy and secure! Now, first off, several people have left reviews stating that the holes in the wooden parts for the acrylic sheet tabs were too small, requiring them to widen them. I think that they failed to understand that the tightness of those holes is *intentional*. You don't want the tabs to drop in easily and rattle around. The tight fit keeps the unit more stable and secure. And it isn't difficult to get the tabs into those holes, even thought I did NOT receive the mallet that is shown in both listing and in the parts list that comes with the display case. The heel of my hand was plenty enough force to tap the pieces together, and as long as you are paying attention, and line things up so that you are only ever applying direct *downward* force without any angle to it, you really run no risk at all of "snapping off the tabs" like other people have complained. Seriously, the hardest part about this assembly was removing all of the film from all of the acrylic pieces before assembly! And they supply a tool to even help you do that! Fully assembled, the swinging doors were a little tight to close, needing me to flex the plexi a little to get them secured, but, honestly, that isn't really a complaint. That tightness keeps the doors from swinging open on their own, so I like it. My only *real* complaint is that the acrylic/plexi used is a little... soft. When loading up your case, don't let your items rub against them, because if they are made out of anything that is stronger, they will scratch the acrylic. A slightly higher quality plexi would fix that, but I think that would affect the price-point too much. The only things I would change at all about these units is that I wish the LEDs were COOL white, rather than warm, and I'll be looking into swapping them out, and I wish that for the swinging door types, that there was a hole drilled on BOTH sides so that I could choose which way the doors swing open. IF I end up completely re-doing all of the lighting in this unit, then that's a simple thing to do, by just flipping the wooden top and bottom around. That only works, though, if you don't plan on using the integrated lighting, otherwise, you're stuck with the hinge being on the left and opening from right to left. Overall, given the tightness of the fit of all the pieces when properly assembled, this unit is MUCH more sturdy and stable than I anticipated, and looks very nice. All of the included tools to help you with assembly - from white gloves, to film removal tool, to even a microfiber cleaning cloth! - really show the attention to detail for such an inexpensive piece. And the risers are better than shown in the videos, too, with extra cross-braces to make sure that your shelves don't sag! If you are on the fence about trying one of these out, then I recommend you give them a shot. They come in such a great variety of sizes, and are easy to assemble and look very nice, whether you're displaying toys, fine art, or anything in between.

We ordered this display case for my son’s girl friend as she has a nice collection of figurines she needed a way to display and keep dust at bay. The case is simple in design but elegant. The interior lighting adds to the elegance. Compact and easily sits on her desk. Unfortunately the case arrived with a couple of the acrylic panels cracked. I contacted the seller and they quickly replied to manage the complaint. That was very encouraging to know the seller backed their product. It was not clear if the damage was caused by shipping or other. Regardless, since Amazon has a gracious return policy, we returned the item and re ordered a new one which arrived in flawless condition. Two takeaways, seller is upstanding so feel comfortable with placing orders with them! Amazons return policy encourages buying with confidence!

Decent Display. I should have ordered the XL. My bad for thinking 3 tier had 3 steps. They consider 3 tiers to be the floor plus 2 steps. I needed more room but it’s put together already so I’ll keep it. Installation was easy, it was the protective film that was a little stubborn to get off. Once it was off, the windows are nice & clear. It comes with gloves and a cloth so you don’t get fingerprints on it. And the light changes to several colors and modes.

It's so cute! It's pretty sturdy and keeps our figures clean from all the dust. My favorite part is being able to open the door easily. Other cases have their doors a little stickier so it moves the entire case and figures end up falling over but this one works for us. We got the 5-tier with the diagonal lighting in the white color. The light is a USB-A connection so we had to find a connection box for it since we mostly have USB-C ports in our house. It was easy to assemble. It came with picture instructions and gloves so that you wouldn't get finger prints on it while setting up. The only trouble I had was removing the protection film. That took the longest. So setup time was roughly an hour, maybe? Since every single piece had protection film. Definitely will be getting another since we have so many little figures.

These are horrible, it’s hard to get the film off, the notches did not line up in multiple areas and the plastic cracks if you look at it funny. Overall not happy that I spent $50 on something that broke as I put it together.

Looks great. The hardest part of putting it together was getting the plastic off all the pieces.

This is pretty nice display case. Really easy and straight forward to put together. Everything snaps together so no tools are necessary. The only thing I noticed was the black piece are very easy to scratch or dent but if you handle with care that shouldn’t be a problem. The led effects are a really nice touch with multiple settings to choose from. I feel it’s good buy for the price

Although this product looks nice, it’s extremely flimsy and difficult to set up once you get to the door portion. The panels don’t attach to each other just the top and bottom of the case. The door has no attachments just one hole. There’s a hole at the top and bottom but that’s if you decide to use the left or right. You can’t use them at once. I tried to gently install the door and the top part of the casing chipped off which forced me to make the door open on the left instead of the right. At this point once it’s set up I just wouldn’t open it. If the other side chips off then you can’t install the door at all. The only pros I found is that the casing is clear. It comes with a cleaning cloth and gloves. It can fit a whole 12 figurine popmart set. It comes with double sided tape which I used to adhere the shelves to the case and adhere a few of my miniature figurines so they don’t fall. I’d give this product 5 stars if they figured out a way to fix the door so that it doesn’t rely on that one hole that could break off when installing.

Good

This is an awesome product. Good price, fast shipping. Great packaging quality. Easy to assembly. Also came with white glove and little hammer. Extra light aloso include. Light and look WOW. Best human service. I highly recommand ;)

It is pretty and it displays beautifully but please put it together where you want it displayed. I put this together then tried to transfer it to where I would display it and it broke. Very delicate plastic that doesn't stay together well. Love the light in the top, though, and the fairy lights it came with.

Bought this so I can put my funko pops in a display case. Pieces for inside the case were missing, so I had to send it back. If the product was like the description the price would have been perfect.

Excelente para mostrar algún producto comercial o incluso guardar algunos juguetes de colección que tengas, aunque la verdad pensé que era un poco más grande. Si me toma por sorpresa que fue bastante chico. Pero aún así se mira de muy buena calidad y la luz alumbra bastante bien