WT03 Micro FPV AIO 600TVL Camera 5.8G 25/50/200mW Adjustable Transmitter with Cloverleaf Antenna for Mini Aircraft

The packaging was decent, the instructions were easy to follow and was able to set it up and get it running in about 2-3 minutes. The camera quality is decent for its size. The range at max is pretty good and will not loose signal when going behind a couple walls in your house. The speed is pretty good and it feels like there is little to no delay from the goggles to the vtx. The only things to keep in mind is that the unit gets very hot when used at max power and the antenna is easy to bend so be careful when setting it up. Otherwise it’s a quick and fun way to add a VTX and Camera unit to your drone or rc car.

I bought two of these cameras with built-in transmitters. I installed one on my modified Inductrix (Tiny Whoop) after the old camera I was using died. Installation was just as easy as the first time around, but this time I was able to set the transmitter power to 50 mw instead of 25 mw, which made a real difference when flying indoors. No more video loss!I installed the second one on a 1/10th scale RC car (just stuck it on the wing with some double-sided foam tape) and set that one to transmit at the 200 mw level. It has great range! I actually lose RC control before I lose video on the car. This is a perfect camera if you're building an indoor racer (quad or RC car), and I think it would probably be OK to use on a small outdoor racing quad as well. For sure it's more than good enough for a dirt track FPV race truck or buggy.Setting the transmitter frequency is very easy thanks to the blue LED display. And the video quality is surprisingly good, especially considering how small and lightweight the package is.For this price, I'm absolutely thrilled with the performance.

The camera is great for the price, I got a range of 80ish yards with a clear line of sight. It gets very hot, even warped some pla that it was in direct contact with. It only overheated once, and I was running it for a few hours straight in 90 degree weather and with no form of cooling. My only complaint is that it is hard to mount. I just glued it to a piece of foam, but if you want to design a mount for it it might be hard.

I use a few different types of 1s lipos, and these Wolfwhoop WT03 are perfect. I've bought a few in past and still come back to this specific model. Why? Well... The milliwatts is adjustable, and the higher milliwatts isn't always good, due to the radius of the output (bubble). Too high and you can't get too close with your FPV gear, so the key is having diversity on the googles with RHCP matching and a patch antenna as well.Anyways, works as intended, cheap effective and I can easily to long range FPV with no issues.

The media could not be loaded. Wolfwhoop WT03 Micro FPV AIO 600TVL Camera 5.8G 40CH 25mW/50mW/200mW adjustable Transmitter with Cloverleaf Antenna for Mini Aircraft This camera really impressed me with range. I have used it on all the power settings. I was actually very surprised and now I am experimenting with the various channels and power settings to see if I can get a clearer video feed from the camera for even longer runs. I will update this review soon with a video I made of the feed the camera gives. The WT03 camera is great for flying FPV and aerial views. I noticed little if any lag. With it mounted to a quadcopter, it got out to just over 700 meters before the FPV feed from the Wolfwhoop WT03 camera started cutting out and I had to turn back. That is very good range for this camera. There were no trees or anything else in the way...it was a straight shot, so I am not sure about the WT03's range in more congested areas. I have flown it on several quad-copters with similar results. The camera feed looks pretty good, and it definitely handles the bright sun and even lower light conditions well enough to enjoy it. This is a great All in One FPV cam to install on an RC quad-copter, plane, or ground vehicle. I love to see the view from the air. I will most likely be purchasing more of these. If you found this review Helpful, please check Yes. Much appreciated, Willy C

I didn't have very high expectations when I got this. I just needed something cheap and easy to throw on my rc planes and this seemed to do the trick. I'm actually really surprised at how well this works. The picture quality is surprisingly good and it super simple to set up. Just plug in a battery, set the frequency and your good to go. I haven't tested the range on it yet but it seems to hold up pretty well with minimal breakup when within 100 feet.The only thing to really be aware of is that the VTX gets really hot pretty quickly so definitely mount it somewhere that won't melt or be damaged by heat and also get some air flow over it as soon as you can.Overall I'd recommend this for anyone just wanting a quick intro to FPV.

Worked great for about 30 seconds and then it started smoking. After we tried turning it back on it was burnt out completely.