Aluminum Cleaner

I used this stuff on an aluminum utility trailer I've had for a few years and was getting ready to sell. It had been covered in leaves and had junk piled on it. I pressure washed it which removed most of the heavy stuff but it was still stained with lots of brown markings that the machine didnt touch. I sprayed it with the cleaner and let it sit a few minutes. I took a stiff brush on a pole and swabbed it and the brown marks just disappeared. It is nasty stuff, I had to make sure I was upwind otherwise the fumes would knock you out. I also wore gloves to protect my hands. The spray head worked well on its own.

This was AMAZING cleaning the pontoons on our boat. Spray on, wait a few minutes and hose off. We are beyond thrilled at how well this worked.

Worked good. Had to do a lot of scrubbing to get it clean but it worked. Thought it would be easier from what the description said

Works grate on aluminum. Use only in open area. , cleans aluminum for painting if needs painting . Gratefor the price . Will buy again as needed .

This stuff is amazing! I would recommend this to anyone. Just be sure to read instructions and start from the bottom up and you will be ok.

I recently tried out TAR BRITE Ultimate Aluminum Cleaner & Restorer on my old aluminum canoe, and the results were pretty impressive. I've been looking for a good cleaner to bring back some shine to it, and this stuff worked wonders. It's advertised as perfect for pontoons, but it did a great job on my canoe too. Using it was super easy. I didn't need any special tools or equipment, just applied it according to the instructions, and the dirt and grime started to come right off. It was satisfying to see the difference as I cleaned; one side of the canoe looked brand new, while the other side still had that dull, weathered look. The contrast was stark, like a before-and-after photo you'd see in an ad. What really sold me on this product was taking a picture of the cleaned side next to the non-cleaned side. The cleaned area was so much brighter and looked almost new, which was exactly what I was hoping for. It made the whole canoe look bad in comparison, so I ended up doing the whole thing.

I bought this for a DIY project to clean the white aluminum siding stains off the brick on the front of my house. It didn’t work on the brick, but to be fair, it worked great on the aluminum siding. I tested a small area and it came out really clean, so once the weather improves, I’ll use it on the second floor siding and shutters, the only spots with aluminum.

I expected this cleaner to work better than it it. It removed some grime on my boat but not to my satisfaction. Would I buy it again.... very doubtful.

Used this to clean some lower aluminum control arms for a collector car. They came out looking better than new. Nice and shiny, Removed all corrosion and left a brilliant finish. Some light scrubbing was needed on a few spots, other wise spray let sit 5 mins and pressure washed off. Would recommend and will buy again.

Love it when a product works as advertised. The oxidation on our boat was getting really bad. I was leery about a product that would work but this one definitely exceeded expectations. Given how bad this was on our boat, I applied a first coat, dabbed it with a large sponge to avoid dripping) let it sit for about 5 mins and then used a soft scouring sponge to scrub the deeply affected areas. I reapplied (dabbed with the sponge again) and let sit for another 5 mins or so. The results, as you can see in the picture, were great. Couldn’t be happier with the product, highly recommend. Key here is to be patient, take the time needed to let the product do the work.

Took a bit to get the hang of how to spray it without dripping stains. Works well. Took off years from our horse trailer. Make sure you wear gloves, it burns your hands

The product works great. Unfortunately, we lost about 30% due to a leak in the container which was not shipping damage. The spill was contained in the plastic bag. Clearly left the manufacturer with the leak. Marshall

Used on an aluminum boat to get 3 years worth of grime off. Spray it on and wait a couple minutes and then agitate with a brush. then blast it off with a hose or a pressure washer. All I got to say is wow just wow. I would caution the use around galvanized trailers it will start to eat through it quickly. Spraying things down prior helps but covering sensitive metals is the ideal thing to do