120GPH Submersible Water Pump, Pond Pump, Aquarium Pump, Fish Tank Pump, Fountain Pump with 120 GPH Pump Excellent Powerheads for Aquariums Hydroponics Air Pump with 6 Feet Power Cord

Just received the Submersible Water Pump as a replacement for the pump in my EVOLV8 mini aquariam which was making too much noise. My mini aquarium is out of production and the company does not provide replacement parts so this water pump is a godsend. It is so quiet. Whenever I walk by the aquarium I check the live plants to see if they are moving in the water, just so I know the pump is still working.The electrical cord is extremely heavy duty. Because it is thicker than the previous water pump I had to turn the pump body around in the compartment in the aquarium to make enough room for the electrical cord. I have it on the lowest setting and it runs beautifully. I didn't need the higher flow rate but it is quite powerful on the higher settings.I saw a number of complaints in regards to the nozzles. There are actually three. Two are loose in the box and one is on the water pump. I had to remove the one on the pump to put the next size down on so it would fit the poly-carbonate tubing I already had to the output on the aquarium.. Getting the nozzle off the water pump was not easy. I had to use a dull kitchen knife to pry the nozzle out enough that it would loosen when I twisted it off.All in all, I really like this little pump. I plan on purchasing another Tiger Pump 120 GPH as a backup, in case this goes out. I don't expect that to happen anytime soon but with live fish and live plants you cannot afford to be without a pump. I definitely recommend this product to others looking for a submersible pump with power and a small footprint.

Tiger Products LLC is an amazing company. This little pump hasworked beautifully the last few days, it was more than affordable and it makes almost no noise (I actually have to completely deaden all other white noise just to hear it). The amount of water it moves is impressive and the cost was amazing.All that said, it would be nice if it had a few of the bells and whistles a few others do, such as being able to run dry without problems. My guess is it can handle running dry for a short time, as the design seems hardy enough, but I am definitely not going to test it when Tiger Products LLC says not to run it dry

This works great in my fish pond. Not much noise other than the sound of the water bubbling. Since I installed it in the winter, I haven't attached it to the fountain so it just bubbles in the pond, but it has done a great job of keeping the water from freezing so far. The only drawback is that I wish it came with a filter. I used the one from my old pump and secured it with a rubber band since the filter cage wouldn't fit this one. Filter is a necessity with goldfish. Pump works great, though!

This is a small and powerful unit. You adjust the flow with a small grated valve much like the vents on an auto a/c. We have it on full and the riser hose is apx 1 ft up. We use an old sea-shell to keep the water from squirting too far but still giving us good water flow in Dad's little 'boy being goosed' cement fountain top. The unit is small, maybe 2" square or a little bigger, but it works great and is easy to install at this size, where a larger one would have been a lot more difficult to get situated.We bought a 60gph unit last year and while it worked fine, it did not put enough water out to give a satisfying sound. This larger one is perfect.We got the hose at our local TrueValue hardware store where they have it on rolls and cut off just the amount we needed.

Good water pump....I needed a replacement pump for a portable evaporative cooler unit, and couldn't find anything available from the manufacturer. I took a chance with this, and it was a direct exchange, perfect size, and capacity...without any adjustment at all...even the tubing port was right. It has no problem delivering water up the 1/2" feed tube,at least a couple feet, and am sure it could do more, if needed. It's quiet and efficient. Giving 5 stars now, and will add anything later if need be. I recommend this pump. Has a very heavy duty power cord attached, instructions, and a port size adaptor.

While the 120 GPH Submersible Pump does properly pump water, is quiet, and is of proper physical size, there is a problem with the pump's outlet size. The pump has an integral 1/2 inch OD outlet. There is no adapter included to convert the pump's outlet OD from 1/2 inch to 3/8 inch. Further, the "adapter" shipped with the pump is 1/2" OD to 5/16" OD. A problem; this makes the adapter's inlet size, 1/2 inch OD, exactly the same size as the pumps outlet...requiring yet another adapter or risking damage to the pump to connect the two. This does not make sense. Perhaps it is a wrong adapter is shipped with the pump.Ideally, the pump should have adapters to interface the 1/2 inch OD outlet with 5/16, 1/4 and 3/8 tubing, common sizes for the intended applications.Inclusion of the pump's head would be helpful to a customer making a selection.Update: 3/8 inch interface problem solved saving the cost of return. The pump's fixed outlet is 1/2 inch diameter and is suitable for 1/2 ID inch tubing; the "small 1/4 inch interface adapter" included with the pump also has a 1/2 inch outside diameter. You can interface the adapter with the pump by removing the 1/2 inch outlet; be brave, use pliers, it will mar the the outlet's finish; and inserting the adapter in its place. No provision esists for 3/8 inch ID tubing. The 3/8 inch tubing interface problem was solved cheaply, using a section of a ball-point pen barrel, one end was inserted in the pump's outlet, the other into the 3/8 inch tubing...use a cheap pen, thinner walls gives better flow. Why couldn't the manufacturer think of that? Summary: Poor choice of adapters, no instructions, no specifications...you are on your own.