Description
- Before using this machine, please connect the waterpipe with the lower water flume tie-in. Then install the lower water flume in the bottom of the machine (The waterpipe can pull out from either front or back) Connect the Output waterpipe with the sewage slot.
- If you choose the W-type grinding wheel, the right hand is used for rough grinding and the left hand is used for precise grinding. So is the Wv-type grinding wheel. It also has a V-shape slot to refit the glass.
- Take out the lower water flume and wash it after it is used for a long time, or the sewage hole may be blocked
- If the grinding machine occurs a problem of weakness(vain in grinding please modify it with the whetstone bar. When modifying please open the water valve.
- Put the water upper flume in the upper slot of the machine and infuse about 700-800 grammes of pure water. Take out the sponge under the water valve and put it in water when you use this machine for the first time. Push it hard with your hand and put it back after the sponge is completely absorbed in water. Open the water valve and control the water flux within 80-100 drops per second. Then you can switch on the machine and start it.
Precautions The machine shall be used only for polishing and grinding To avoid any injury, when the machine operates, please do not touch the grinding wheel or polishing wheel on the machine Please do not use the machine when the power supply can’t meet the requirements (voltage and frequency). You must make sure the details of the power supply your use. Do not put the machine at any place with high temperature or direct sunshine. If any liquid or material enters the inside of the machine, please immediately turn off the switch and pull out the power plug. The machine can’t be operated again until it has been checked and repaired. Except the original parts of the machine, other part can’t be assembled onto the machine Do not overload the machine, and do not impact any part of the machine. If the machine is not used for a period of time, please pull out the power plug. During the operation, please maintain the water level of water tank and keep the surface of grinding wheel moisture. Item Included 1 set of Eyeglasses Lens Hand Edger and Polisher 110v(153016)
