QualGear QG-PM-002-BLK Universal Projector Ceiling Mount, Black

This was my second attempt at a mount for my new ViewSonic PRO8530HDL projector. But I have an odd setup with the shape and composition of my area. I have cathedral ceilings in my great room, so I knew I wasn't going to support this from the ceiling. But I do have a 3/4 floating wall between the kitchen and the great room, with cabinets on the other side. I had figured on using one of these mounts, but "upside down" from their normal position of hanging, and use it to mount something UP while mounted to the top of the kitchen cabinets, holding this up so it would peek over the wall. The first one I had wouldn't span the slightly larger distance between a couple of the oles, and one of the mounts was just not sized right. I returned that, and hoped this would do better. I loved the layout of this compared to the other. Everything was similar, just better. Especially the claw that you mount the projector to. The options for parts made it easy to size and mount my projector. My downside is that this is designed to be used hanging from the ceiling, just like a ceiling fan mount is designed to allow you to hang the ceiling fan from it until you get things hooked up. This is the same - the mount by the claw has notches so you can literally hang it from the pole, giving you time to insert the bolts that will tighten it into a specific position. Doing what I was doing, the base mounted on the bottom and the arm sticking vertically up with the projector on top is the opposite, so it was more of a pain to get set. But it went fine. Even this way, used in a direction it's not designed to handle, it was very solid, and stable. I was able to line things up right and had no issues with movement. Unfortunately, it turns out that this position is 12 to 18 inches too far from the wall mounted screen, and I can't shrink the picture enough to fit the screen without it being over the edges. So I have a relative who owns a metal fabrication shop making me a custom plate I designed that I'll mount to the wall directly, with a diving board type platform sticking out past the wall now for this to sit on. So while I can't use this mount due to the positioning of things, it worked flawlessly. I have no complaints.

10 minutes of assembly and worth every single penny! This worked amazing for my projector mount at a fraction of the cost of others. Pros: Easy to assemble Adjustable in every angle that you could need Secured to the ceiling with quality hardware (included) Many extra parts to fit a variety of applications Cons: The stickers on the side of it are really stuck good and theyll need to be removed in order to make a clean installed look Conclusion: The sticker thing is really nit picky honestly this is a brilliant product that works exactly as described. This is a good buy :)

I bought this mount versus some of the other ones out there because of 2 reasons, the projector screen I bought was from qualgear and the quality of the product I found pretty good. I wanted a matching product line. The box came and was smaller than I thought. The materials used looked pretty sturdy and the second reason why I bought this was it gave me an option of using the telescopic pole or mounting it closer to the ceiling. My screen is roughly about 1.5 ft below the ceiling because it’s oddly shaped which prevent me from placing it higher but I like it like this because it’s more at eye level rather than looking up slightly. Back to the mount, very easy instructions provided with the template used to drill the holes to mount the plate that will allow you to easily attach the pole or the mount adapter. I had this up in no more than 20 minutes after measuring and finding my ceiling studs. I installed half on the stud and half using the provided drywall anchors. The only reason I gave it 4 stars is because I’m really not sure how it will hold up to a heavy projector I plan to purchase, I have a relatively lightweight (7 lbs) projector and at times tightening the swivel to get the picture square was not easy. This was the only that took a lot of time because the weight of the projector kept on drooping down so I had to raiding it higher anticipate the droop.

Full disclosure, I have been offered a gift in return for a review. I ordered this mount to install a new Epson HC2030. The packaging was good, item was secure and arrived in perfect condition. The materials are top notch, solid steel all around. It might be heavier than the projector. It looks good with a low gloss finish. Installation was a bit tricky, took a few tried to get a good mounting position with the 3 mounting holes on the Epson. Instructions were clear and easy to follow, once to take your time and read them. There are a lot of adjustments that can be made to get the projector level. I was able to get it mounted without needing any keystone adjustments pretty quickly. I like the easy cable management up the extension arm, makes for a cleaner install. There are a ton of parts in the box, but the screws are nicely labeled. I'm sure this would allow installation on just about anything you could want to hang from a ceiling. If I had complaints, it would be that it was a little confusing deciding the configuration I needed to get the mount onto the projector, but that's what happens when you use a universal mount. Overall, I'm very satisfied with the mount. It works great and looks good too.

Not the most fanciest, but it works great. I actually expected lower quality because the prices for other mounts went into the hundreds. I figured it a worthy gamble for the low price and am completely satisfied. My projector is hanging 20" from the ceiling surface. After adjusting the disply alignment to the wall mounted screen, it hasn't moved a bit...even before I had the cables and power cord secured right. (They were hanging down to the floor). If a good, easy to install, basic mount is what you are shopping for. I would recommend it.

This is a good ceiling mount, specially at this price!!! I have a heavy projector hanging on it and no issues. This is rated for up to 44lbs. This one has long extension up to 25” from the ceiling which is what I was looking for. If you don’t need to adjust the angle a lot with the projector for perfect view (this allows up to15 degree angle), then this is perfect. I bought a strong ceiling mount from QualGear without the extension before , but I struggled getting the correct view since my screen is mounted low. This mount resolved my issues.

Needed this to mount my new Optoma UHD51A projector closer to my screen due to the decreased zoom compared to my Epson 5030UB. This is an extremely well built mount with adjustment in just about any direction. The cables route down through the center of the rectangular sliding center with an exit out the bottom rear. The mount comes with 3 different sets of projector mounting legs to fit just about any home projector. The giant well organized/ labeled bag of retainer bolts/screws/washers is fantastic as it has everything I need. The black coating looks great and helps it blend in with the dark environment. The multitude of adjusters allowed me to get my protector image centered on my screen easily. The mount came with the black coated lag bolts and a nice paper template to get all the holes marked and drilled easily. This is highly recommended to anybody looking to mount a small to medium sized home projector.

I use this mount with an Optima HD20. It includes multiple screw sets for different size projector mounting holes and 2 allen wrenches. The only tools I needed were a phillips screw driver and drill with a small bit for pilot holes where I mounted it to the ceiling. The instructions are minimal, but it is not a complicated assembly. The mount is designed for a projector with four holes, but my Optima HD20 only has three. After my initial attempt to use it, I was ready to send it back because I could not figure out how to mount it to the Optima. The Optima's mounting points are much closer together than the arms on the mount, even when using the two supplied short brackets. However, after thinking on it for a day, I was able to reconfigure the mounting arms to work by removing all the arms, attaching them to the mounting holes on the projector, then reinstalling them to the mount backwards, thus shortening the distance between the mounting points. In the end, I used only three of the four arms, and it works perfectly. It would have been easier if the mount included more short mounting bracket. It comes with 2, so it took me a full day to realize that I could still mount the longer ones backwards to shorten the distance. The mount was flexible enough to allow me to make it work, without any modification to the mount it self, just some minor reassembly. Once the projector was attached to the arms, attaching it to the ceiling was a no brainer. I did not use the extension arms, but there was ample room to adjust and tighten the screws. I would have given it 5 stars if it had come with four short mounting brackets and better instructions to show how you could mount the brackets backwards without sacrificing its strength.

Fait son job montage sur benq full hd avec trois points de fixation léger jeux entre les deux barres réglable pour la distance qui peut occasionner des vibrations de l image a cause du ventilateur. Pas encore trouver de solution a part peut être resserrer la barre qui contient l'autre barre pour éliminer le dis jeux

The build quality and included accessories is great. It's one of the few budget options that fits my Epson 3800.

Good and stress free installation. It will work with every projector on the market. They provide you with more than enough spare parts to adjust how you want it mounted

Received very quickly, day after order. Well packed with clear instructions. Many parts included, to cover all installation eventualities. Height easily adjustable, and projector mount itself has fine adjustment in all 3 axes to cover installations not absolutely horizontal or vertical. I am using it to mount an 11Kg projector, and it is easily up to the job (spec says 20Kg max). Seems strong and well made.

Este soporte es uno de los mejores que he adquirido, definitivamente lo recomiendo, no solo es fuerte sino que cuenta con todos los tornillos y accesorios para colocar un proyector prácticamente en cualquier ángulo. Cuenta con piezas extras y movimiento en los 3 ejes que lo hacen completamente personalizable.