Pegboard Mounting & Spacer Kit

These are a lot better than the black plastic spacers.

Works great with 1/4" holes in your pegboard. Spacers kept falling off of screws, so I used a magnet on the outside of pegboard. (Spacers on back off pegboard) Slid the spacers over in place and screwed them in! Worked out great!

Put a square of double stick carpet tape (or similar) on the wall over your holes. punch through to show the holes. Then stick the spacers right on the wall, centered over each hole. It's so much easier to locate your panels with the screws this way. By the way I've installed 4 panels and 2 packs of spacers already and for some of them I had to use other anchors/ screws since those yellow supplied anchors in the Spacer Kit(s) simply buckled when I tried to push them into the holes I made in gypsum board (they worked okay when I put them into another wall that was just basic wallboard. I used "self drilling" anchors (but I pre-drilled holes which works better) into the gypsum sheetrock, and they were metal anchors (the nylon ones work too) so I didn't use the yellow anchors or the thick screws supplied with that particular installation. Otherwise, the included screws and anchors work. If you use the included screws (that screw snugly into the pegboards) they will be hard to manipulate into position. -Which means that you have to make darn sure that your holes and "lining up your screw aim) is spot on straight. That's not so easy. Hopefully using my experience will help you if you run into any trouble, and make your job go smoothly. All in all I would certainly get this kit again, and the Triton plastic pegboards; I only wish they sold the spacers themselves as a separate item, because frankly the screws are a matter of preference (I do not prefer them and I'm not alone) and those yellow anchors are just garbage (unless the wall is very soft material). Besides, plastic anchors are notoriously weak, finicky and prone to buckling and thus losing their effectiveness for performing their holding job. I like "self drilling" anchors- they are secure and have more holding strength than any other kind of molly in my opinion and they go in easily and simply, and firmly.

I am very happy these worked. A little hard to get the middle in if using a large sheet of peg board. Mine was 7' tall and 4' wide but if you can bend the board you can make it work. It's the perfect distance from the wall, all the pegs fit in the holes with the gap the spacers create. I highly recommend it. We'll be buying more for the garage now that my craft room is done.

Made for easy pegboard installation. Kept me from having to make my own spaces for Sheetrock wall mounting.

Spacers and anchors are great. The screws themselves are terrible and they will strip so quick even with the perfect bit. Recommend going to Ace Hardware and getting better screws. Otherwise, this will hold up to some serious weight.

Exactly what we needed to hang pegboards for storing yarn :)

The hardware in this kit is a lot heavier-duty than it looks in the pictures. The stamped steel spacer are extremely solid, and the hollow wall anchors are large and heavy-duty. Your pegboard will stay on the wall where it belongs.

Excellent hardware. Much sturdier than a frame.

Best way to install pegboard without a doubt!

Works like a charm in mounting peg board to a vertical surface. Great price.

Product need instructions on how to install. Had yo consult YouTube to learn from someone else. Once I figured it out the were great.

Très solide,très bonne qualité prix