12V Car Add-a-circuit Fuse Blade Style ATO/ATC ATM Kit Low Profile Fuse(Small)

Bought this to hardwire a dashcam to the fuse box. I'm not "skilled" in this department, but after a few YouTube videos and some head scratching I got it done. Worked out well, happy with purchase.

Great product .... Came on time and works just like it says .. Great little invention ... I would order again !! and probably will ....

Worked in a 2015 4Runner. Quality of included fuses could have been better but they work.

This add-a-circuit does what it is meant to do. You simply remove an existing fuse from your fuse block and insert it in one side of this adapter and then add your new fuse on the other side. Splice in your wire to the power lead on the adapter, connect your ground and you are done. It is a very easy way to add in a new circuit especially if you have never done this before, or if you are just out of room in the fuse box. The wire lead coming off is about 6 inches long, and the small size that I ordered seems to fit into the fuse slot nicely. I do have one complaint, putting the fuses into this adapter is very hard. I had to use a pair of pliers to force the fuse down in. And once it was in, it is like pulling teeth to get the fuse back out. To be fair, if you circuit is hooked up correctly you should not have to touch the fuse for a very long time, but when you do I would hope that it is easily accessible with a pair of pliers. Perhaps this will loosen a bit over time, and certainly you dont want the fuses to just fall out, but this seems to be a bit too snug. Also, the price seems a bit high at $6 each. Looking at similar products on Amazon, there are 5 packs for about the same cost. Overall, this is a good product that fills in a need for many people. I just caution you to play with it a bit before you install it so that you see what I am referring to. For the reasons mentioned above, I feel that this product deserves 3 stars. It is a bit pricey, and has a minor flaw that makes it a bit difficult to use in tight spaces.Disclosure: I have received this product at a discount in exchange for my honest review, but that fact has not influenced my opinion about the product. I was not required to write a positive review and no monetary compensation was received for writing reviews.

It works, it's fits my car. Despite what the pictures above show, the "mini" size is probably what you want for a late model Honda. Above it says that the mini is for Korean cars. The pictures are wrong.So, it's a great product, but it's a two star review. Here's why.One, it didn't ship with that was promised. Here's what I thought I was getting: "Use with ATO fuses up to 10 amps. Includes ATO 3, 5, 7.5,10 and 15 amp fuses." It didn't ship with any fuses. Zero. It came in a little bag and that was it. No diagram, no instructions. Also, if it only works with 10 amp fuses, why would anyone ship it with a 15 amp fuse? They obviously didn't ship it with any fuses, but it's as if the description was a copy paste from somewhere else.The lack of any sort of instructions or diagram is beyond me. Yes it's largely intuitive, put device into fuse hole, but it should come with instructions simply describing what fuses I need, maximum amperage, why there's two fuse slots on top.This was sent to me at no cost for review purposes. I have no connection to the manufacturer or vendor and they have no control over what I write.

What a great idea. What I didn't know until I got them is they hold two fuses, one to replace the original fuse the the other for the power lead coming off. But here is what is really cool, I used two of these to power my lighter socket on all the time, just pluged on of these into continuous hot, used two fuses in it and then only put the outer fuse in the other tap for the lighter socket feed so only one side of the fuses spade was hot so not to back feed 12 volts into the switched side of the ignition. Make sure you know what you are doing before using them though. Never work on live circuits. Always ground first. If you are unsure if you know what you are doing, pay a mechanic. Not worth accidentally setting off your airbags or overloading a circuit. Consider getting lower 2 amp ATM fuses if you are powering low amp electronics (GPS, cellphone charger, dash cam, etc) .I received this product at a discount in exchange for my honest review.

Product not as described. Note I have not yet sent a message to the seller about this issue but I will be doing this and may update my review and star rating based on the feedback. At this time the star rating is a 3 star due to this issue.In the description it says "Includes 3,5,7.5 and 10 amp fuses"When I received the package no fuses were included just the add on circuit.It would also be nice to have some basic instructions. For me the one thing I wanted to know was where to install the other wire in the circuit as it is clear the hot is connected directly to the fuse. I found this online. "Take the black wire from the vehicle hardwire kit (the ground line).use a nut and bolt to attach it to the metal plate on my fusebox. There was a convenient spot with a hole in the plate, seemed like it was made for that."All that being said I was able to add what I wanted to my car with no issues.

An extremely handy tool to add an extra aftermarket accessory to your vehicle. It fits well and installs with no issues , I use these to install a couple of LED bars in my trunk because the stock trunk lights are horrible and basically useless.Eliminates the wiring and looks much nicer, wiring is thick and durable. Never work on live circuits and always ground first. If you haven't the slightest idea how to install something like this , please hire a mechanic. If something is done wrong and your airbags fly out or a circuit is overloaded , the cost would be substantial .I received this product at a discounted price in exchange for a fair and unbiased review. The above are much feelings towards the product.