Duratrax Pit Tech Deluxe Car Stand, Blue, DTXC2370

This pit stand works great in my hobby room. I didn't think that it would really make much of a difference in the way that I work on my trucks, but it really does. It allows me to move the vehicle about more freely without having to worry about holding onto it. Doing basic maintenance is a snap now, as all I have to do is flip the vehicle around on it's stand without having to worry about picking it up at all. My SCT and other trucks fit on it with their wheels and tires on with no issues. I've noticed a few people mentioning that they have trucks that drag along the table when they leave the wheels on, but I haven't had this issue. It works fine with my Torment SCT, Stampede, and my on road car. I did find that with my Summit the wheels and tires would drag, but that's a huge truck so I feel that was to be expected. I simply removed the wheels when using the stand with the Summit, and didn't have any issues. In fact, I feel that removing the wheels while using the stand would be a preferred method, as it makes it just that much easier. I'm really glad I bought the stand, as it's made maintenance on my trucks that much easier. It also breaks down to a fairly flat set of parts for easy transport inside a pit box or bag. I also like the parts tray on the front of it...no more losing screws on the floor that were just rolling around on the table!!! Highly recommended.

I've got a Traxxas Slash 4x4 and when on this stand, the tires are at least 1" off the table-top. I'd have to go to tires 2" bigger to make it hit. And I'm getting ready to do the Low CG conversion so that should give me even more clearance. This stand works great for repair work. The only thing that could be better would be if there was a braking mechanism that would liimit its ability to rotate so easily. It's a standard problem, sometimes you want it to rotate and sometimes you don't. But for the price, this thing is pretty much perfect. Also use it for my RC10 B4.2. Perfect for it as well. The other genius feature is that it breaks down easily for hauling around in the tool box. Great tool and great price.

Not a bad stand, I like that it packs back into the box. The recessed center helps with drivelines on crawlers. My other stand is the simple bent polycarbonate that I had to put rubber rails to raise the edges.

Very happy with this stand for my Traxxas Slash 4x4. Some people say it doesn’t sit high enough and the tires are still on the ground. I do not have that problem with mine. Tires are a couple inches from touching. So works perfect. The blue color is nice over the black. It makes it easy to see black screws in the tray. And because my Traxxas Slayer also fits on this stand just fine, I ordered another one :)

Just got My R/C Car Stand in today & I can tell it is worth the price. Most important thing about this product I can pass along would be that Its a little bigger than the pic looks ..good for My 1/10 Scale Buggy ..not so good for My 1/16 Scale Buggy, unless the Wheels are removed first. What I like the most is that I can disassemble it into 3 pieces & take it along if need be. The plastic definitely Looks & Feels Supportive. The 2 Rubber tracks are well glued & the metal pipe in-between the base an lift is a perfect fit, allowing it to spin freely with minimal wobble ..meaning it should hold an R/C steady an true for tuning. I'm Confident I will not need to edit my 5 star review after putting it through some use, though If I'm wrong I will

I had been using this stand for the past 8 months for my Traxxas 1:16 Mini E-Revo and my lightened 1:10 Losi Ten-SCTE. I even used this to fix my buddy's Traxxas Rustler VXL. This stand is great because it collapses down and stores in a more compact form. The tray in front is convenient for axle nuts and body clips. That said, I'm a little disappointed that the base had a stress fracture starting around the metal ring that holds the cylinder to elevate the platform. In my opinion, the plastic material surrounding the metal ring is a bit too thin to be supporting a "heavy" model's weight. That's why I mentioned that I have a lightened Losi Ten-SCTE because they're known for being one of the heaviest Short Course Trucks out there, but I put it on a diet and it weighs a bit less than a stock SCTE yet it still stressed out this stand. I'm very particular about my tools and equipment and as such I don't abuse them at all. If you have light- to medium-weight vehicle, then this stand should serve you well. Just make sure that you center the vehicle's weight on the elevated stand so as not to introduce some side-loading at the base.

Duratrax you made a great one. It fits my 1/10 HPI Blitz as well as my 1/12 HPI Savage XS. It relieves the suspension so it can sag to full length and also spins smoothly. Added bonus, I can turn the truck on and spin the wheels without hitting the stand. Good for testing simple things like if the wheels spin freely or if the motor is hooked up correctly. It's durable, collapses for traveling and has a useful tray for holding small parts. What more could you want?

My husband ordered this to use while working on his Traxxas RC cars! It held them up just to the right hight that he needed them to be. A bonus was that it turned so he did not have to remove the car and turn it to the right direction.

Good item

バラしてコンパクトに出来るので遠征に行くのにとても、重宝します。

It’s plastic, not metal like it may appear in the images but none the less it’s a good value product.

Works well for my Axial SCX10. It would be nice to be able to raise it up a bit higher though. The tray works great to store body clips and screws, etc.

Nice sturdy RC car turntable, however my stand was quite loose and spins very freely, while a friend of mine who has the same stand has a much better, tighter fit. Easy fix with a bit of tape around the aluminium shaft to make it just that little bit tighter. The stand can be taken apart and stored flat, however it doesn't clip together in this form, just sits loosely on top, comes apart when being transported in a bag. It would be better if it was secured together. Overall a pretty good RC car stand, with only minor issues.