Snailfly220 LBS Roof Rack Cross Bars Fit for 2011-2021 Jeep Grand Cherokee Crossbars Cargo Luggage Rack, Aluminum Alloy

This is really a nice product. Great looking low profile on the vehicle and extremely sturdy. I installed it on my 2021 Jeep Grand Cherokee Ltd. Assembly is fairly easy but the instructions are a bit confusing. The rubber pads for the bottoms of the crossbar "feet" are unnecessary, not addressed in the instructions and almost impossible to utilize - I discarded them. Very happy with this product!The wind noise is definitely noticeable so I will go back and change the location of the bars and install the crossbar feet. Although they are not mentioned in the directions, my assumption is that they may be an add-on item intended to reduce wind noise.

Very easy to install. Not sure if they have made improvements based on previous reviews but both bars were marked FRONT and BACK with arrow pointing which way to mount. Also included tools and one extra long and short screw. The small rubber boots that go on the bottom of each bracket were a pain to install but otherwise easy. Took me a total of 45 minutes. Good quality product finish. Drove with them installed and no wind noise at all. See pics. They are low profile and look good on my 2016 grand cherokee.

They were very straight forward and easy to install (once I removed/loosened the hardware as instructed) The hardware came cross threaded and if you know how frustrating the little allen keys can be you know the frustration haha BUT besides that the low profile looks great as well, compared to the taller options out there and they seem pretty solid!

I wanted to leave a feedback hoping it helps someone in the future. We bought two sets of these cross bars and installed on two different Jeep Grand Cherokee Trailhawks following the installation method described below. First off, the product came in nicely packaged with one page color instructions and two spare bolts. Second, take that installation instructions and throw it in the garbage. The way I installed it is by loosening all the bolts but keeping everything attached. Right side towers have red R stickers on them and should already come pre-assembled the right way corresponding to Front and Rear orientation. With all the bolts loose lay one bar at a time into the channel making sure you have the same distance in between. Once positioned inside the factory rail, remove top bolts one at a time to apply blue loctite as recommended by other reviewers. This step is optional but helps ensure bolts don’t come loose in the future. With your finger make sure the lip of the tower is seated properly inside the factory rail. Once confirmed, start tighten top bolts alternating until both are tight. Go on the other side and repeat the same steps to tighten the other tower making sure the lip is latched inside the factory rail. Once both towers are secured, tighten small screws under the bar. Repeat all of above steps to install the second cross bar. Remove the orientation stickers and enjoy the finished product.

The crossbars work well on our Jeep Grand Cherokee. They were a bit of a challenge to put on. It is hard to hold the screws in place and get them started with the tool that is provided. So, this took quite a bit of time. One screw came out and luckily, we did not lose it. We carry the tool with us and check the screws every so often to make sure they are tight. They seem sturdy and are a good value for the money.

Directions bad but usable. Rubber boots supplied not covered in instructions so I will have to take it off and put them on after I figured out they needed to be there. I am putting a cargo carrier on it so to keep it from being scratched I will be putting weather stripping on bottom of cargo carrier. The kind used for trucks when you put on a shell.

Fairly simple install. I wanted low profile and that’s what I got!

The bars are loud when driving. They were easy to install.

I seen some people complaining about noise while driving, I personally did not experience any noise upto 130km, if you experience noise, maybe one of the bars is on backwards? there is a correct orientation marked on them.Perfect for what I wanted, however since these are lower profile there's not a whole lot of clearance under them depending what you're mounting on them, I did get a very small dent after mounting some kayak racks with long bolts and they bounced around a bit, this would only be an issue case by case, for me I may just trim the bolts a bit and I'll be good.

Muy estéticos y de buenos materiales.

Once installed they look and fit great. I am fairly handy, but they took me about 90 minutes to install. If I had left out one step, it would have been much quicker. I would rate the product a 5, but the installation can be a bit tricky if not done right, and they make a bit of whistling noise when driving.Like others, two of the screw’s threads were a bit rough and hard to get out and back in. I did take the advice of others and used loctite (red) on all screws when installing.The rubber gaskets are flimsy and tend to fall off during installation.I used someone else’s suggestion and used a small piece of foam under the brackets to keep them elevated so the screws would reach. This worked great. Make sure that you alternate between the two screws when tightening.My mistake - I loosened the screws under the cross bar thinking that I would need the side to side adjustment. There is no room to retighten them once the cross bars are installed. Struggling with this cost me almost 40 minutes! You do not have to loosen these to install the bars, the width is fine right from the company.The two hollow tipped torx wrenches that are provided were stripping out by the end of the install.

Bought them for my 2017 trailhawk. For the price they are solid. No noise on the hwy either. However, I had to drill the slots for the back one slightly longer otherwise the back one wouldn't fit. Not a huge issue for me and still well worth the price.