FEL-PRO 3075 Gasket Making Material

You should all have this, it will get you out of a bind and it is of the highest quality.

I bought this because I was replacing the water pump on my classic Fiat. I snapped a bolt while installing the new pump and had to remove it. Well, ordering a new gasket from the specialty supplier (can't just get it at the parts store) was going to cast me $3.59 plus $21 for shipping. I traced the old gasket on this material, cut it out and installed it. I wasn't difficult and there are no leaks.

Nice and thick, high quality, GREAT seal. Had to make a few seals with this as I had to disassemble parts after having them assembled due to stripped threads. It takes quite a bit of patience to shape this material and it was too strong to use any of the cookie cutter techniques. I ended up tracing the designs (every one of them complex as all ****...) and using a scalpel to iteratively carve the gaskets. I then used a Dremel and a sand wheel to sooth out the cuts. I used drill bits, by hand, to create bolt holes, then smoothed out the holes with the Dremel. The only real downside to this material is its smell - it's pretty awful.

This gasket material is being used to rebuild a 1944 Farmall Type A tractor, whose parts are not readily available. In lieu of a tube gasket, my husband prefers to make gaskets out of this material to fill a void between two surfaces so they don't leak. The initial problem he had with this material was that it came rolled up and wouldn't lay flat, so it was hard to work with. He laid it flat on a piece of steel and put a weight on top of it. After a few days, it relaxed and stayed flat, and was easy to work with. This gasket material does the job!

Used during water pump replacement for the thermostat housing. OEM paper gasket was paper thin compared to the Fel-Pro 3075 Gasket Material. used the OEM as a template traced outline of gasket cut the center first and made a perfect copy only twice the thickness. I have the added comfort of heavy duty gaskets on my cooling system, for very little money. Well worth the added cost and effort.

I work on a lot of old cars, trucks, and tractors. You can’t always get the gasket you need and this stuff works great. It seals well and is pretty darn durable

Good quality, thick enough for any small engine gasket.

It makes good gasket material for what I needed for

Wow, je suis vraiment surpris de la qualité. Je me suis fait un joint d'étanchéité pour mon throttle body et j'ai aucun vacuum. J'adore ce produit. Merci

Best product

Gasket arrived. Some of it is damaged as it is too thick to be rolled up as it was.

Très content et conforme à ce que j'ai comander,😁👍

I used this to repair some small engines that needed new gaskets. All the small engines are up and running now, so you get the drift 😉