PERLESMITH Universal Speaker Stands for Surround Sound -Height Adjustable Extend 33.3”to 45.1”, Floor Speaker Stand for Satellite & Studio & Bookshelf Speakers up to 11LBS,1 Pair Black, PSSS2

These Perlesmith universal speaker stands are exactly what I needed. Super easy to assemble, height adjustable, and they feel really stable and well-built. The black finish looks clean and they blend nicely with my setup. Holds my surround speakers perfectly (both bookshelf and small monitors). No wobbling, and the cable management is a nice touch. Much better quality than I expected for the price. If you’re looking for reliable stands without spending a ton, these are a solid choice! 👍

Sturdy, well-made, and very easy to put together. Most importantly (for me and for anyone else considering them) they are a perfect for my new Klipsch Flexus Surr 200 speakers. Also very much like the easy swivel feature to direct the speakers as required. Great product!

These stands have both strengths and limitations worth noting. Cons: The stands are not height-adjustable. Speaker wire must be threaded through the pole before attaching the base plate, which may complicate setup. The top plate only uses non-slip pads to hold speakers in place, with no additional securing mechanism. Pros: Attractive design, featuring a glass base that lends a modern, upscale appearance. Straightforward assembly, easy to put together with minimal effort. Stable on both carpet and hard flooring. Sturdy enough to support bookshelf speakers (currently holding Klipsch R-41M speakers without issue). While the lack of adjustability and limited speaker security could be drawbacks for some, these stands are stylish, easy to assemble, and reliable once in place. They are a solid option for anyone seeking a simple and visually appealing solution to display and support bookshelf speakers.

I really like the look of these stands. The tempered glass is nice & thick, and should be much easier to clean than MDF stands. I really like the larger floor base and speaker base. It should keep even the bigger bookshelf speakers very steady. My speakers are 7 1/8" wide x 11" deep and the placement looks really nice. Assembly was fairly straight forward. All the bits and parts were included, and everything fit together as expected. I love the larger floor spikes. Shaped well enough to keep it steady on the carpet without piercing too deep into it. I do have some complaints, none of which is worthy of a ratings ding. If I ever have to move the stands and/or replace the cables, I think I'll probably have to take it apart to get the speaker cable to thread through the bottom hole and come out the top hole. I have fairly thick, molded banana plug cables. On assembly, I ran the cable through the detached tubes before connecting them and attaching the ends to the plates. The center support rod came in two pieces, and there is a nut in the middle where the two pieces connect. I am certain the plugs will snag on that nut if I were to pull or push the cable through the assembled tube. I'd really rather not have to tug & pull to run a wire through. This is probably not an going to be an issue with thinner non-molded cables. It would have been better to have designed some form of cable management outside of the tubes. Also, the edges of the holes for the cable management are not smoothed out, so be careful about pulling cable through and rubbing on the edges. They're not super sharp, but they will scrape your cable if you pull hard and tight. Finally, here is no notch or guide (at least none that I found) that will allow you to make sure the top plate and bottom plate are correctly aligned. It may be an OCD thing to want to sides of the top & bottom plates be perfectly aligned, but most people will probably be ok with "close enough." Overall, I am very happy with these. They do the job and they look great!

Great stands for my monitor speakers. The flexible width of the top is an awesome feature. Sturdy and well-built. Thoughtfully designed with the rubber/sticky pads that hold the monitors in place well. I appreciate the feet at the bottom. These stands have been designed with the user in mind. Easy to assemble.

This is a classic regret it but not enough to deal with sending it back purchase. It holds my Micca 4" bookshelf speakers up (about 4lbs each) adequately and they don't wobble while playing music. That's the whole review: it's adequate, not designed for a dog/kid household, and I'm already hunting for a replacement. The base is heavy enough I don't feel like a breeze or tremor will knock it over. The poles are straight. The adjustable feet went on easily and adjusted for about an eight of an inch issue with the plate. Mine came scraped to bare metal on the base where one pole inserts, but not where the pole covers. I'm disappointed that it requires using a double-sided adhesive pad to attach the speaker to the stand. I wouldn't have purchased it if I'd known that. How am I supposed to remove it to adjust the height like the instructions say to? The height adjustment never tightens enough to be secure. It can be pushed down without effort (even by me). My speakers are around 4lbs each. It's supposed to hold up to 11lbs but I don't know how that would be possible with the height adjustment in use. Cord management channel is useless. I had slim banana clips on standard wires (the Micca ones) and despite the hole and tube being plenty wide enough, they jammed up halfway down the top pole. I unscrewed it to see if I could feed them through piece by piece or from the other direction, and nope. Just jams up in the middle, couldn't even see them, and I wasn't going to shove hard enough to break my clips. Not worth messing with at all. This purchase is an adequate reminder for me not to get impatient and order something just because it has a lot of reviews, is on sale, and will get here quickly.

Sturdy, excellent quality. Minutes to put together. Has cable management. Look great too!

These are good looking stands and were quite reasonably priced. However, they are only held together by a pair of threaded rods that run through the hollow center post and screw into the top and bottom pieces. The center post isn't really attached to anything at all, it's just held in place by the top and bottom pieces. The speakers I'm using with these stands are fairly lightweight and seem to be supported well enough for now, but if you are using heavier speakers with large magnets or active monitors with integrated amplifiers, I advise caution. As long as the stands aren't moved, this delicate arrangement of threaded rods should tend to hold, but I do worry that vibrations could work the threaded joints loose over time and cause problems. After all, these are meant to hold speakers, and speakers do vibrate. Even so I would still recommend these for setups with inexpensive speakers, where aesthetics are more of a concern than stability; if your speakers are not both inexpensive and lightweight, you may want to consider paying proportionately more for stands. Another issue I encountered with these stands is cable management. The hollow center posts could potentially have cables run through them, they do have openings at the top and bottom apparently meant for this purpose. However, there's no straightforward way to actually get cables in place; professional stands have an open channel that runs the entire length of the post so that one can easily just pull the cable through the stand. Naturally, this shortcoming can be worked around - other reviewers suggest routing the cables while assembling the stands - but it is a further indication of a product that isn't particularly well thought out. Even if you do manage to get the cable through the post, it'll still be visible at the bottom of the stand because the lower opening is above the bottom plate, rather than running through the bottom plate to the floor. Furthermore, I had hoped there would be some sort of leveling capability with the feet on these stands to help compensate for slightly uneven flooring. To be clear, this is not an advertised feature, just one I had hoped for. In fact, the feet can be individually partially unscrewed to provide a limited form of leveling capability, but then of course the same issues I've pointed out with the center threaded rods apply, vis-a-vis potentially loosening over time. Moving forward, since I already own these stands, I'll probably disassemble them at some point - before they have a chance to fall apart on their own - and apply threadlocker or PTFE tape to the threaded rods and feet to address my concerns about long term stability. I might even drill a hole through the bottom plate so that I can implement a tidy cable management solution. Until all that is done, I'll wish I'd bought better stands in the first place.

I just needed a pair of affordable speaker stands but didn't expect the quality to be this good. What a pleasant surprise!

It’s a shame I couldn’t find a good quality and strong stand locally, but I’m glad I found one. Perfect for the rear speakers of my LG Soundbar (S95QR). The tube isn't wide enough to let the power cable pass thru but still super happy with this one.

I couldn’t be happier with these Universal Speaker Stands! The build quality is excellent — solid, sturdy, and surprisingly lightweight. Adjusting the height from 33.5” to 46.9” was super easy and gave me the flexibility I needed to get the perfect sound positioning for my room. They securely hold my soundbar without any wobble and I am sure they will do an even better job at holding the speakers that are definitely light-weight than a soundbar. The design is minimal and modern, which fits perfectly with my setup. I also appreciated the integrated cable management feature — it keeps everything neat and clean-looking. The pictures attached would give you an idea of the maximum height of the stand. If you’re looking for speaker stands that offer great value, durability, and adjustability, this pair is a no-brainer. Highly recommend!

O pedestal é muito bom. Discreto, fácil de montar e atendeu às expectativas. Porém eu paguei quase o dobro de preço na taxação do produto. Algo que o vendedor não informa na pagina do mesmo.

Happy, good stands