eatelle Vinyl Bulb Translucent Shower Door Seal for 1/4" (6mm) Gap with Pre-Applied 3M Tape, Adhesive Bathroom Seal Strip for 1/4" Thick Glass and UP(3/8, 1/2 Glass) 95 Inch Long

Two major problems with this product. It is basically defective.1) There is a semi-rigid, flat plastic backer (dark pink in the photo) between the gasket and the adhesive. The product was packaged tightly coiled with this layer facing out and the plastic took a permanent coil shaped set. So the gasket curls up off the surface it is adhered to. We tried applying heat with a hair dryer to straighten the plastic out, but it's probably been set in the coil shape for years and difficult to overcome.2) The other problem is the adhesive is very weak and cannot overcome the curling plastic. My guess is the adhesive is beyond it's shelf life as it doesn't even leave any sticky residue as the gasket cleanly peels off (on it's own). Plus it's not cheap. We would ask for a refund but I waited over 30 days to install / discover the issues.

Looked for months online and in retail stores for something to use on shower door. THIS IS IT.

All right here's the trick, you have to hang it and let it unfurl, what I did was use a pair of vise grips clipped onto the bottom while it was hanging from the ceiling and then I used the heat gun to warm up the material to remove the memory from the material. Because it's been curled up in a bag and naturally wants to return back to the curled up state. Also the 3M adhesive that is on the back is no good, so I used gorilla glue double-sided clear waterproof adhesive tape.The first time I used this product it failed And I experienced the same failure everybody else was having with it.I did this a week ago and it's still installed flawlessly!

Impossible to keep ends from rolling up. Got two sets, kept unrolled for a week, even used a heat gun on the second set as the first one got wasted as it kept getting unglued at the tips. No change with the second set, keeps ungluing and rolling just a day after install.

Great adhesive. Exactly as pictured.

I used this for my glass shower doors.

The adhesive tape does not hold well to the shower glass door. Also wants to re-curl up to its shape in the shipping package. I did fix that by winding it the opposite way and placing it back in the shipping bag, then let it warm up outside in the sun for an hour. Probably would not purchase this again.

The product was curled when I received it. After installation, the two ends were peeled off. Tried several times. Even applied hard force for hours. Still peel off. Had to buy a glue to fix the problem. It does not work as it was described.

The product was stiff and slightly yellowed, possibly old stock. There was not the flexibility that I would have expected on a product of this type ( as compared to similar products in stores). I unrolled the strip and left for a day, after weighting down in attempt to straighten. This was not very successful!The strip started to spring off the shower door edge within a day and despite resticking on glass door it fell off within 2 days.Definitely would not buy again!

Cannot work as supplied... curls back to original shipping shape which makes it come off despite all attempts to make a perfect stick down. After purchase, read other reviews adn tried to straighten it out before hanging, but this still did not help. Cannot imagine this has worked for anyone. @supplier: if it was a more flexible plastic would probably work

I followed the advice posted here and made sure the product was fully flat and stretched out before installing. I found that a part of the stick tape still didn't hold but it was easy to use another double sided tape with it

this was actually in a sealed bag but must have been repackaged as it had been cut with the cut piece in the bag. it was not sticky at the ends. can't be bothered to return it

This shower seal is to rigid. Right size but needs to be softer