Specifications Main Controller: 32-bit MCU Sensor: High-precision 3-axis gyroscope and 3-axis accelerometer Gyroscope Scale Range: ±2000 dps Accelerometer Scale Range: ±4g PWM Output: 920uS ~ 2120uS with 1520uS center length / 50 ~ 333Hz Input Voltage: 4.8V ~ 8.4V Operating Temperature: -10 ℃ ~ 50 ℃ Size: 43×27×14mm Weight: 10g (excluding wires) External LED Module An external LED module is added to make the gyro even easier and more convenient to install and use. Trainer Mode Trainer Mode is added. When flying in this mode, you can only tilt the plane to a certain angle by giving aileron or elevator stick input. Roll and loop are not allowed in this mode, the plane will be stabilized all the time. This prevents the plane from being tilted into a larger angle that may cause a danger. This mode can be used as emergency rescue, or in other applications, e.g. to have a training for new beginners or to use for FPV 6-position Mode Switching This new feature allows you to switch the flight mode among all modes supported during flight, by using a mixing of a 2-position and 3-position toggle switch on your transmitter Programming Examples for 6-position Switch Mixing Pass-through Channels Pass-through function is available for [A2] and [E2] channels. When the second aileron or elevator channel is unused, the input signal applied to [A2] or [E2] will directly be passed to the output [OUT4] or [OUT5]. With this feature, the [A2] and [E2] can be used as any other purpose as you need, e.g. throttle, gear or flap, etc
D**R
Best gyro among several ones I tried.
As a Futaba guy, I have to add gyro to my planes (Spectrum folks can enjoy all the advantages of AS3X technology). I tested several co-pilot modules, including the original Futaba co-pilot, but HOBBYEAGLE A3 Super 3 is my favorite! It's really easy to install, especially when you have experience of co-pilot's use. If not - just read the user guide and watch videos on YouTube. Lots of folks are explaining step by step. What I like the most about this model is the possibility to connect it to a computer adjusting gyro to your exact type of plane via their software with all those rich features. Furthermore, an external module for field changes or corrections is a great add-on. But I think, one module is enough, so next time I will order just the co-pilot itself.Great job, folks!
R**D
but I think I did not a good job in the config
I have them installed in all my aircrafts. I was very concerned to fly in windy conditions because a floppy landing was always damaging my landing gear. Since I installed it, I use it always for landing and when flying with very gusty winds. Tried a few times the AutoLevel, but I think I did not a good job in the config, But I really don"t need to use Auto Level, given that that is the "panic switch" for students learning and venturing flying solo without supervision.
S**K
Nifty product that will complicate installation for a novice
Good little product with decent software and instructions. If you’re novice to RC, this doesn’t have a receiver; make sure you get one with it that has an sbus or PPM connection for setup ease
H**D
One of the best plane gyros on the market I would say
It took a little while to set up correctly but once it's set up it works great. I have mine set on a 3 position switch and it works very well. This kit has all you need as well. Great buy.
R**G
can't go wrong!!
I'm surprised! this is a great gyro, I fly fixed-wing RC with gear and separate aileron servos and the best is that it'll take sbus inputs, sorry the best is that it has a small programer that you can use at the field instead of a small laptop, this is handy!
M**N
Difficult first time set up
Difficult;t for me to set up ... Ounce U have done the second one may be easier. The big problem for me was the nomenclature. If U don't under stand it Just like the first time doing something on a computer, U get compleatly lost.
G**O
Awesome
Works great
A**R
Best software experience with both the pc software and programming ...
Worked perfectly for a servo driven active gimbal.Best software experience with both the pc software and programming card. Super versatile. Couldent be happier
Trustpilot
1 month ago
2 weeks ago
