BAMF 3-Way Coax Cable Splitter Bi-Directional MoCA 5-2300MHz

Used these to split a MoCA coax feed to several boxes. We have a Comcast router+modem, and so we have this splitting the street and 2 Hitron MoCA boxes to the MoCA-enabled router. It worked phenomenal and gives us gig-speed speeds over the Moca line and feeds our router at the same time.Advice with this product:- If you do a similar setup remember THE ROUTER CABLE MUST BE ON THE INPUT PORT, NOT YOUR STREET CABLE. When i did this wrong, the router did not connect to the internet.- P.S- Don't forget the line filter to stop the signal from reaching your neighbor's houses.

The level of service provided for such a small purchase (in terms of dollars spent) and the quality of the product speak volumes about the company!In order to resolve signal strength issues, I went straight to Amazon in search of a new splitter and to investigate signal amplification. After looking at several products and reading their corresponding reviews, I settled on BAMF, ordered one three-way and two two-way splitters. Very soon thereafter, I received a customer service-oriented email from BAMF thanking me for choosing their products and offering to answer any questions. A PDF with very useful coaxial cable wiring tips was attached. Reading the tips led to a couple of questions so I replied to BAMF, described my setup using their diagrams and information, described the problems I was having and asked for recommendations. They answered questions fully, helped me diagnose possible problems and provided solutions. I took their advice, installed their hardware and was rewarded with a much-improved cable signal.BAMF 3-Way Coax Cable Splitter Bi-Directional MoCA 5-2300MHz

It's a splitter. It works. Actually, I chose this splitter because it works at the frequencies that allowed the use of MOCA adapters to enable me to use the house's coaxial cable system in lieu of Ethernet cabling to hardwire some WiFi mesh network nodes for wired backhaul.

At first glance the case seems to be made of pot metal. That's fine, it works. DirecTV installed a 4 way splitter with only 3 jacks connected. I figured the additional split and open connection would cause a lower signal at each outlet. We have experienced intermittent problems with the spot beam local channels, which are always the weakest signal. This 3 way splitter did not make a big difference, perhaps a 2 db gain, which I expected. What seems to have helped more is a quality surge protector with EMI/RFI filtering. Between those two fixes, our local channels are now stable.I also noticed DireTV's splitter was rated to 2.1 GHz, while this says 2.3 GHz. No, I did not connect a scope and signal generator to test this claim. DirecTV's splitter is also made of aluminum. Overall, this is a fine balanced splitter.***Update*** We still have intermittent problems with the local channels on one TV. However, the frequency and severity has decreased. The other two TV's are just about perfect. The problem is a tree blocking the signal. This quality splitter gave that extra one or 2 db we needed to maintain a perfect picture. I highly recommend BAMF, and will definitely purchase this brand again and again!

Negligible loss of signal from this and the same one that is 2 way. I tried the 2 way first, and then the 3 way. Almost no difference in the signals when comparing the 2.And compared to no split, just a little loss. These let my OTA antenna amp get power. The splitter that the cable company left did not work with the amp. These products are great. I don't see how any other splitter could be better than these... I highly recommend them. Note: After splitting, I was able to move my amp power inserter to a spare TV and improved my signal strength on my main TV even more.

This magical device saved my marriage and made my child love me again! A few days ago, we suddenly and unexpectedly had no TV signal right at the end of Dancing with the Stars. I was happily reading my book when wife and daughter came to me near tears! The TV wasn't working!I found this to be really strange as our TV antenna had been pulling in broadcasts without interruption for over two years since we got rid of cable. I checked everything along the way, and all seemed to be in working order, but I looked at the old coax splitter that was between my wonderful antenna on the roof and the TV. This thing came with the house and has gone through multiple satellite providers and cable TV connects and disconnects. Scattered on the ground were it's discarded brethren, left to rust in the weather after being replaced by uncaring contractors or an uncaring service provider.Hoping for an easy fix, I dutifully drove to Target in pouring rain in search of a replacement splitter. Alas, one was not to be found, so home to Amazon where I found this splitter's little brother (only a two way splitter) marked as "Amazon's Choice." Hope filled me, and I searched for a 3-Way splitter made by BAMF Manufacturing, and to my delight they made one!One order and paitiently waiting for Prime shipping, and absolute success! The old splitter and it's fallen brethren have been tossed into the rubbish bin, and we have TV signal again. In fact, according to the revered TiVo's signal meter, we have a significantly stronger signal than we had before!Thank you BAMF Manufacturing! If your device could exist on a pedestal next to our TiVo we would display it there with pride!