BONTEC TV Wall Mount Tilting for 23-60 inch TVs, Low Profile Design, Max VESA 400x400mm, Holds up to 115lbs, TV Mount for LCD LED OLED Flat Screens, Fixed Ultra Slim Bracket Fits 16" StudsClimatePartner certified

Comes with everything needed to install. Plus way cheaper than buying one in store. Save the money and buy this. Would recommend

Works great , easy to install

It’s ok but should be stronger

The wall plate is designed to span two studs. Unless you have 8 inch or lower stud spacing it can't be centered on a stud. For standard 16 in stud spacing, it must be centered between two studs (for wider stud spacing it doesn't work). If you are picky about the wall position of the TV and wanted it centered near a stud, buy a different wall mount. With 400mm wide VESA the TV must be centered within 0.75 in of the center of the wall plate. Narrower VESA gives you more range to mount the TV off center on the wall plate, up to 4.7 inches to either side for 200mm and 6.6 in for 100mm. But you might want up to 8 inches off center before a different pair of studs would work better and you can't get that much with this wall mount.The L and R marked on the vertical pieces are from your viewpoint as you attach them to the back of the monitor (not from the completed orientation looking at the front of the monitor). A pair of pictures in the instructions makes that clear. If you have 400mm wide VESA, you must get L vs. R correct or it won't work at all. Several of the bad reviews say it doesn't work with 400mm VESA, one of which (saying it was done by a professional installer) shows it not working and clearly shows the L vs R pieces are reversed. My photo of this product attached to the back of my 50 inch TV with 400mm wide VESA shows it working well with L, R pieces correct. It also works for 400mm high VESA, but I don't have a photo of that. For narrower VESA, I don't think it is important to get L vs. R correct (unless you need the full flexibility for off center positioning). My photo (top down view) of the verticals attached to my 32 inch monitor shows L vs. R intentionally backward, because I think that works a little better for this monitor's recessed 75mm VESA mount.If you have power or display cord sticking straight back (as you see in my photo of my 32 inch monitor) that may be a problem. The cords as shown do not work. The monitor mounts slightly too close to the wall. I had a spare right angle power cord and I bought a right angle DPMI adapter, that would fix this problem. But for other reasons, I wanted this monitor an inch further from the wall and kludged standoffs between the monitor and the vertical pieces. For most monitors, the provided standoffs (much less than an inch) might add just enough for rear facing cords to work. But for most monitors you would need to buy longer screws for the standoffs to work. (Of course most TVs don't have this issue at all because the plugs are built sideways and only need standoffs if the back is curved). The provided standoffs don't work at all with the strange recessed 75mm VESA of my monitor.If you have a monitor smaller than 32 in, or you have 75mm high VESA mount, the vertical pieces will protrude as seen in the photo of the top of my 32 in monitor (75mm VESA). I wouldn't mind that because it is part of a bank of monitors that hide each other's mounting. But for a normal TV, this is likely a bad choice of wall mount for under 32 in and/or 75mm VESA. For 100mm to 300mm VESA on a 32 in or bigger TV there is enough flexibility in how you attach the verticals to the TV to hide them. For 400mm VESA, the verticals couldn't protrude even if you wanted them to.The wall mount screws look like you could use either philips or 10mm hex drive to tighten them. But, as mentioned in a few of the bad reviews, the screws are not high enough quality for the philips to work. The head will strip. The screws are plenty for holding a 50Lb TV on the wall (I'm not sure about the 99Lbs advertised). But you should use a 10mm hex drive, not a philips screw driver. Having put up a large number of similar devices, I would always use hex drive anyway (buying different screws if the ones provided were not hex drive). If you don't have a good stud finder and a ratchet set including 10mm, maybe this is not a product for you. (You still use a philips screw driver to attach the vertical pieces to the TV).

Great value for price. Works perfect. Delivered quickly!

Liked sturdiness and how easy is to hook the tv in place.

Like the simplicity.Disliked the quality and length of the pull cord. This caused an issue when I was unable to reach it easily... And when I finally did, it snapped. Replaced both with parachute cord (yes, you really can fix the world with 550 cord, 100mph tape and bailing wire)Minor point. It is a static angle as it is caused by using washers, basically. Neither good nor bad, just a fact.

Easy to install works great

Die Halterung ist qualitativ hochwertig und dazu noch preisgünstig. Anleitung ist auch top. Was will man mehr.

Producto de buena calidad, con muchos accesorios que le hacerlo universal y compatible con casi cualquier tv.Si tuviera que colgar otra tv, no dudaría en volver a comprar este producto.

I recently purchased the BONTEC Ultra Slim TV Wall Bracket for my Samsung Neo QLED 55" TV, and here’s my experience:Installation and Compatibility:Installing this TV wall bracket was straightforward, and it fits my Samsung Neo QLED 55" perfectly. The bracket supports TVs from 23 to 60 inches and has a maximum VESA size of 400x400mm. It holds up to 45kg, providing sturdy support for my television.Design and Build Quality:The bracket has an ultra-slim profile, which creates a sleek and modern look when mounted on the wall. The spring locking system ensures that the TV stays securely in place once mounted, giving me peace of mind.Functionality:I appreciate the tilting feature of the bracket, which allows for optimal viewing angles. It tilts smoothly without any issues, enhancing my viewing experience whether I'm watching TV or playing games.Included Accessories:The package includes 5 cable ties, which help with cable management and keeping everything neat and organized behind the TV.Feedback for Improvement:One suggestion for improvement would be to include longer wall mounting screws. The ones provided were not long enough for my specific wall type, and having longer screws as an option would be beneficial for different mounting scenarios.Pros:- Fits Samsung Neo QLED 55" TV perfectly- Easy installation with clear instructions- Ultra-slim profile for a modern look- Tilting feature for optimal viewing angles- Sturdy build quality with a spring locking system- Supports TVs up to 45kg and VESA 400x400mmCons:- Provided wall mounting screws were not long enough for my specific wall type; longer screws as an option would have been appreciated.Overall Impression:The BONTEC Ultra Slim TV Wall Bracket is an excellent choice for anyone looking to mount their TV securely and elegantly. It fits my Samsung Neo QLED 55" TV perfectly, and the tilting feature adds versatility to my viewing setup. The bracket’s build quality and ease of installation make it a standout product in its category. I highly recommend it for anyone considering a TV wall mount solution.

Parfait

Very stability