Front and Rear Inner Fender Liners Fit for 2007-2018 Jeep Wrangler JK JKU

Thick metal, very sturdy. Easy to install if you use self tapping screws instead of the supplied inserts. Directions aren’t great, just look at the pictures and you’ll figure it out. Was missing 1 part. I emailed them and they sent me a replacement part right away. Good people

Took forever just to put them together bc they arrive in pieces with 500 bolts - which the directions neglected to tell you they are specific to sides (if you can even say there were directions). Then, only to find out they don’t fit - the rear ones also require major drilling and a special tool to use the rivet nuts that come with it.

Overall good quality. But one does need rivet nut pliers to set the rivet nuts. Instructions are poor quality and not very well written, but if you have a mechanical mind not too hard to work out how to fit.Only issue is the kit is short of qty4 M5 or M6 size rivet nuts to fit the front assemblies. The rear section of the front fender shields at the point they attach to the body at two positions need rivet nuts. One cannot fit a regular nut as there is no access.

Instructions are on a single piece of paper. Very hard to understand. I looked up similar installs on You Tube to figure it out.

Came with bad instructions- parts are not marked and they all come in individually wrapped so you have to figure out each piece on your own and it takes forever cause the pictures suck - chips in them so we used 4 in 1 metal paint to make them look better- I would never get these again or recommend them to anyone

Looks nice once installed, fit is a little rough, some parts were scratched on arrival, but I suppose that's not the worst thing... they're bound to get scratched up from rocks and stuff kicking up.I found it difficult to get good clean holes drilled where needed for the front liners especially. The instructions are terrible, but in the best way, with occasional head-scratchers like "Get on the train better than the good position"

Waste of money, I wouldn’t recommend purchasing this item. The instructions are very poorly made and the holes don’t line up with the bolts. Do not purchase. Unfortunately I waited too long to attempt to install these and my return period expired.

Here is what you need to know they look great! That being said be prepared, install was difficult and you need a riveting tool. I also want to add that things don’t line up 100%. Just remember all custom stuff that’s cheaper takes work.