Kohree 12V Switch Panel IP65 Waterproof with UPGRADED USB Switch

I bought the Kohree IP65 Waterproof 12V/24V Switch Panel for my campervan conversion, and I’ve been extremely impressed with its quality and functionality. The panel feels solid and well-built, with smooth rocker switches that have a satisfying click. The dual USB charger port (4.2A) is a fantastic addition, making it easy to charge devices on the go, and the lighter socket is a great extra feature. Installation was straightforward, and the included wiring made the process even easier. The IP65 waterproof rating gives me peace of mind knowing it can handle outdoor conditions without any issues. The switches are clearly labeled and illuminate nicely, making them easy to use even at night. Overall, this is a fantastic switch panel for anyone working on a campervan, boat, truck, or any 12V/24V setup. It’s durable, well-designed, and packed with useful features—highly recommended!

Replacement for previous one that managed to burn out due to a faulty item going into the 12v so didnt hesitate to purchase again. Did not wire up the V display this time though as where it was originally installed is near my bed so its very bright to sleep next to

Great item

I bought this for a switch panel for my boat. Thankfully I waited for the item to arrive before cutting out the panel rather than use the measurements in the listing as they are wrong. The actual size of the panel is 149mm x 105mm , with a maximum depth behind of just under 75mm. The plate of the panel is 2mm thick, the covers on the USB and power sockets protrude 7mm from the front of the panel. The corner counter sunk mounting holes are 4mm in diameter (not 5)and are centred 7mm from the edges of the panel. The corners are rounded around the bolt holes. Four self tapping 28mm long black screws are included with the panel. Also included with the panel is a sheet of labels. A little annoyingly the sheet was tightly folded in 3 on arrival meaning some of the stickers were unusable, fortunately none of the ones I wanted to use. It would have been better to supply two or three separate sheets unfolded, they would have fitted in the delivery box neatly and meant all the stickers were usable. The panel itself and the wiring behind seems to be of good quality, the switches seem robust. The three 'sockets', the USB , lighter socket, and voltmeter are generic items fitted to many similar panels. They are attached to the panel by a plastic nut threaded onto the round body of each individual socket. The threaded body is 27mm in diameter. The panel is wired to have a single positive and single negative battery supply, with the five switches having individual load output cables each protected by a blade type 15A fuse and clip holder. Whilst the panel is described as IP65 waterproof previous experience of these generic sockets suggests any exposure to water will lead to internal corrosion, so they should be used in at least a semi protected environment rather than exposed to a really wet area, particularly if it is wet with sea water. Overall good value for money but could have been improved a little with a more accurate set of measurements and not folding the stickers.

I've got a couple of these and they do the job but would be better with two changes: 1 - the voltage reader stub is too short so the wheel to tighten it is useless unless you're fixing it to 6 / 9 mm board. 2 - drill bit sizes. just a quick note on a paperwork about what size drill bits or holes you need. a paper template would also be nice just so you can draw the holes ready to cut without having to take it apart first.

I am using this for an electrics cabinet in the back of my Landy (which I use as a camper). I've added so many individual switches, sockets and gauges to the front of the vehicle, and it's been a very involved process. This device, going elsewhere in the vehicle, is exactly what I needed. It looks smart; the voltmeter has the right look to match the interior trim of the vehicle (obviously essential...). The double-usb port and 12V outlet are the same as what I've bought previously for the front of the vehicle. All the wiring for the switches, etc. is already in-place, and the in-line fuse holders include 15amp fuses in each. The unit is well-made to a very good finish. In short...this has saved me a lot of time compared with doing it myself, the devices are what I would have otherwise bought individually, the look is far superior to what I could have made myself, and it is very very straightforward to wire-up, because so much is already in place. Very happy with this.

Good

Looks great but with this unit as many others use 4amp switches all prewired together so total power cannot exceed 48w, which limits its use! And dangerous to provide 15a fuses as switches will catch fire before the fuses!? easy to fix though the switches pop out and can be replaced with 20a type and then have individual cables feeding each switch with correct amp rating for device that it’s switching. However I did wire the socket, battery meter, and usb in parallel supplied off a 20a cable and switch.

Nice product. We used this for our lanai windows in Florida. Good quality and a good middle ground for the project. Not thin like the OG vinyl but not too thick to get in the tracks. I think this hold up better. Overall seems to be good for our intended use. You can still see the tint through the clear hurricane shutters.

Très bien,compact et prêt pour l'installation

Super Panel, wurde für unseren Camper-Ausbau im Fiat Ducato montiert, funktioniert tadellos und alles komplett, mit Sicherungen für jeden einzelnen Schalter, sehr einfach zum montieren, haben unsere ganze Beleuchtung und Wasserpumpe über die Schalter angeschlossen, kann ich sehr gerne empfehlen

キャンピングカーのスイッチ類をコレにまとめておける。 ５連スイッチになっていますが、実の所私は１個余らせてるｗ 接続も簡単だし、ヒューズも内蔵されているので、すぐに使用できる。 シガーソケットも付いているけど、あまり使い道は無さそう。

Super produit, beau et de qualité ! Par contre, au vu du câblage d’origine et de ce que j’avais prévu d’installer comme équipements sur ce tableau, j’ai préféré refaire le câblage en ajoutant un porte-fusibles 6 voies avec bornier négatif. Je trouvais en effet que le dimensionnement des câbles d’origine était un peu faible par rapport aux équipements que j’allais installer