Cable Matters [UL Listed] 10Gbps 6-Pack Shielded Cat6A Keystone Jack

Here is the break down of the jack: Design (5/5): This is the design where you lay the wires across the jack portion and not the plastic cap portion, which means that you can punch down these wires instead of pushing the cap down to finalize the wire connections. The cheap Chinese connectors will have a design where you are forced to wire the cap instead of the jack and then force it down to finalize the connection, which results in bad connections many of the times. This jack also comes with the peaks required to split the wires, making it easy to use the peaks to split the wires (the correct way) instead of having to unwind them prior (incorrect way). However, in order to accommodate larger sized wires, they have opted for a zip tie to bring the metal shield up to become flush with the wire at the end. I find this to be both a good and bad thing, but I am glad that they added support for larger cable sizes. Quality (4/5): Metal could possibly be thicker, and some of the mechanisms used in the jack could be done to be more sturdy. However, this is still a vast improvement from the alternative cheap Chinese jack which has MAJOR issues, and the stamped jack which features thin metal which can be bent with a little force from the fingers. This jack is also machined well, and fits RJ45 jacks with no issues, unlike the Chinese jack, which must be forced. Value (5/5): Comparable jacks are big branded, such as Belkin, however, those are $10-11 a piece. These are vastly cheaper. The review which states this cannot be used with a 110 punch is incorrect. That was for an older version of the jack, and Cable Matters has updated the design to allow for punch down tools. I highly recommend using the Trendnet 110 Punch as a cheap punch tool, as it will give you much more solid connections. It's a very good value buy as well. This jack is the best all-around buy hands down. There are several other competitors out there, but they are either too expensive or poorly built.

Works perfect, able to get well over 2.5GB speeds and confirmed that the run is grounded properly using these. They are heavy and feel & feel premium, make sure you have some flush scissors. Because the way that these work you need to cut the excess wire flush to let the hinges go down to lock the keystone tightly. This even comes with zip ties to help secure it down which I recommend waiting to do once you confirm you terminated it correctly. These also do have very easy to read legends to figure out if you need to wire in A or B which I used rather than having to reference back to the legend on my crimps. Overall, highly recommend these, they are a little pricey, but I would much rather pay this price for the quality than save a couple dollars and the quality takes a dive.

Good quality, fits dual rated cmx-cmr cat6 cables. Reasonable price.

I tested continuity to each one of them before installing and it passed then I installed them with no troubles at all. I did it with a TRENDnet punch down tool!. Highly recommended!. Review update: I bought 12 shielded keystone jack. 11 keystone jack works at 1 Gb but one of them does not, the network speed is only 100 Mbps. I put a magnifier and it had an internal pin defective, it was bended. At that price it was not supposed to happen. I am taking down one star because of that. I will contact to the seller in order to get a replacement. Update: May 2021: About the wide: jack size, front 14.53 mm and back 16.06. Plenty of space in a 6 jack wall plate.

Good quality. Easy to assemble but needs a tool.

I was initially a little skeptical of the toolless punchdown, but it worked really well on 23 AWG solid core CAT6a. I used a C-clamp to cinch mine down tight, but a small bench vice with soft jaws would be most ideal. Channel lock pliers would do it, but will scratch the metal. The plastic guide is designed to accommodate the cable jacket, which encourages you to pull the wires tightly through, and it holds the wires in place before crimping. This helps to minimize the untwisted portion of wire. The finished termination is tidy and strain relieved with no exposed wires on the back side of the keystone. I like that the shielded metal housing completely encloses the connections, and the zip-tie strain relief is a convenient place to attach the foil shield and drain wire. You could use this to make a male to female extension cable for your toolkit, although flexing it too much would eventually make it fail. The plastic gate cover is of debatable usefulness, but for my application (home with 2 dogs that shed a lot) it's definitely a plus, and I think it makes open ports look a lot more presentable.

High quality, best key stones I’ve ever had!

I don't usually stop what I'm doing to write an Amazon review, but I am currently installing Cat6A runs throughout my computer room to three desks and some APs, and I am super pleased with these shielded keystone jacks. I have had zero need to use my punch-down tool; these aren't 100% tool-less because it does make a huge difference to have a quality pair of flush cutters so you can cut the wires off that stick out from the side of the plastic cap before closing the metal body of the jack, but they are about as close as you're going to get to tool-less. The quality is great, and even though I am using these with un-shielded Cat6A cable, the full metal body feels super secure. They zip tie to the shield of the cable, so the jack feels very secure to the point that I can pull on the jack and it doesn't move. I've used cheaper jacks before that felt as though they would just fall off of the cable end if you tugged on them wrong. I've also tested each run that I've terminated so far, and none of them needed to be re-done. Everything seems to work the first time. I'd definitely recommend these to anyone doing wiring with Cat6A, and will 100% be purchasing more of these for future projects!